Search results for query: *

Alright, I'm not sure why it's not working, but the self tapping studs arent tapping, they're just eating the channels that they're supposed to sit in. I have two scoops for my 70 Dart hood and was missing 8 studs between the two scoops. I got a bag of extra studs and need to toss them in, but...

Hey guys, I moved up to the Sacramento area and left this in my family's garage. It's a 904 3 speed that I had bolted up to the 318 in my dart but the snout on the torque converter cracked, it puked oil, was slipping before that and dribbles a bit from the pan gasket. If any of you local guys...

Lets try this again! I'm in need of a small block 904 transmission that I can toss into my car. It doesn't need to be a fresh rebuild, but that definitely doesn't hurt. I would love to avoid shipping due to costs and all that moneys going to the man, but beggars can't be choosers. Please...

Doesn't need a tire, but that won't hurt. I've got what I believe to be a bent wheel and am in need of a fresh one, and maybe will use my old one as a spare. I'd prefer local so that we don't have to go through shipping, but I am open to suggestions. Needs to have the small bolt pattern...

Alright, I think I'm stuck. I'm tossing my ac and heater boxes back in my 70 swinger but can't figure out where the vacuum lines go. I check threads and the manual, but couldn't find anything definitive. Any help? Pretty please?

Alright, I'm having a hell of a time finding the correct rebuilt MC for my car. It has KH power front discs and rear drums. I can't find the correct MC at local parts stores, and am on my second one from rock auto. The first they sent me was manual drum/drum and the one I just received is...

I just sorted through the mess of trim pieces that I got when I purchased my car. I am in need of the following for my 70 Dart: -top right 1/2 of windshield -left side of windshield -bottom right part of the rear window -front fender extension bezels I have: -sides and top of rear -drip trim...

Ooookay, I got the front and rear weatherstripping for my 70 Swinger, as well as lock strips for each end, but how do these strips go on? The guy that did the glass install wasn't sure what to do with them and now I still have leaks when it rains...grr...makes me feel like either 1) I got...

Now, I understand that the oem oil pump requires a notch in the k frame to fit, but has anybody had any problems with the high volume oil pumps? I'd like to keep from going to an external oiling system, so does anything else need to be done for the hv units?

I figure I will toss this guy up on here as well as on FBBO. It's in excellent condition, and I was told it's a never been installed refurbished one from brewer's. I got it in a package deal w/an a-body plate, but the a body one is shot :( $30 takes it, but I would love to trade for an a body...

Do I need a locking strip for my 70 Dart? I thought I was good to go with the weatherstripping only and then I saw that some of these A's require locking strips...deng...If so, front and rear, or just one? Will this guy work out...

I did a search and came up with several results, but nothing definitive. Summit and jegs sell grommets, mopar sells grommets, but then people say use one from a chevy and I have no idea which lol Anywho, I've got the mopar black ribbed valve covers (a/m part) and need a grommet with a good...

**DANGIT...noticed the title is off. That's what I get for posting from my phone*** I'm trying to think of ideas to keep the car comfortable, but I also want to leave room for the cage. The bowed headliner in my 70 swinger is needing some love in the future, and rather than reupholster the...

heyo, I need the nut that holds the remote for the remote mirror on the door panel. Also in need of some good (not pitted) vent window trim. Parts are for a 70 Swinger...going to Spring Fling in a few weeks, so if you're headed there maybe we can save on shipping? :)

***SOLD*** Listing this for my brother. Used Autometer Sport Comp Silver big 5" tach for sale. Had this installed, but went to an in dash setup and don't need it anymore. Everything about the tach still works flawlessly and the mounting bracket is included as well so you can mount it, wire...

I pulled all the belts out of my 70 Dart and forgot to make a note of which ones go where. The retractable ones go up front or in the back? The double buckles go up front for the lap and shoulder harness, right? Are there supposed to be three sets up front and three in the back? Man I'm all...

I just got the roller for the 1/4 window and went to toss it on, but the guy is proving a bit more of a hassle w/the regulator in the car. When I went to compare it to the roller on the opposite side, they are both black and approximately the same size (cannot say for sure because they're in...

I have been trying to find tips on how to restore my vent window trim, but have had no luck. These guys are chromed, correct? Is my best bet to pull the trim, remove the glass, bring them back down to metal and redip? It's currently pitted due to bits of rust.

Ok ok, I know this isn't "technically" an event, but this is a big deal to me! (if this is the wrong section, please redirect me) I just got three filters for myself, and three each for two other family members at Kragen today. Next month, on the 23rd, Rancho City will be putting on a free oil...

Just wanted to give a shout and a thanks to Mike. I wanted to get all crazy today when the caulk strips in his wiper seal kit would not separate from the wax paper. Did a search and I would have to buy them in a box of 60' and I only need, well, something like 6". Mike said no fears! And is...

Blegh! And this is on a southern california car - I don't even want to think about what it'd be like elsewhere. Figured I ought to clean it out while I'm resealing the heater box and sure am glad I did. Pulled all the fiberglass insulation from under the dash, got the wiper seals all...

This event has been going on for quite a while and I figured the revenue from the event and vendors is good for the city, but I guess not http://www.route-66.org/

Hey guys, don't need this anymore. It comes with the large bolt, so you just need to get some gaskets and toss it on. This guy is mandatory for some long tubes unless you go fender well or shorties. I just tossed on tight tubes and can go with the filter straight to the block now. $65 shipped.

These guys are in the 70 Dart i picked up. Car has power steering and these guys sit right next to the steering box. Passenger's side is in the picture below. Ah, and they require a 90 degree oil filter adapter for the 318 in order to even think about fitting (and I say that loosely). The...

Hey guys, just pulled this out of my 70 dart. Casting on it is dated 69 (see pics below). Bought the car and the guy said the engine ran fine, but I didnt like some noise it was making...upon taking it apart a little I found that the driver's side rocker wasn't getting oil. Pulled it out...

http://www.ebay.com/itm/DODGE-DART-1972-QUARTER-GLASS-WINDOW-REGULATOR-ROLLERS-/140907010325?fits=Year:1970|Model:Dart&hash=item20ceb65915&item=140907010325&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr Is it this difficult to find these rollers? Mine is busted in my 70 Dart and I need one...

... But I can't figure this out. Let's see if anybody can guide me a bit... Pretty please. I must be doing something wrong or simply can't find the Damn bolt that connects these guys. Car is a 70 Dart with factory ac. I just ordered the seal kit from dmt and thought I'd get a head start by...

My package tray is all kinds of disintegrated and dead...yes, leaking rear window. As soon as the car is driveable again the first thing on my list is to get it to stop leaking! Seals and weatherstripping are already on the way, but that still leaves me package tray less. I was already...

I have been slowly tearing into this car and while searching for my turn signal flasher, I noticed there are several plugs that do not have anything attached to them. These are just a few, but I will take it a step at a time :P. Can anyone please help in identifying them? The car is a 1970...

Hey guys! I just got a new toy for my collection and am super excited to start diving in head first. Car is a 70 dart w/a 318. Was told it needed a "tune" (whatever some people think that is nowadays :P) and am expecting the worst. Just towed it home and started opening it up. Engine had...