Search results for query: *

  • Users: HemiDenny
  • Content: Threads
  • Order by date
  1. HemiDenny

    4-bar / back half the HemiDenny / HDK way

    doing a 4-bar for my buddy Rick at XOmod.
  2. HemiDenny

    rear drum brakes issue

    needs some help, 8-3/4, rear drums, everything new. the drums refuse to rotate when I tighten the wheel down. if I loose the lugs slightly, it will rotate, but when I tighten them down, movement / rotation stops. It does it on both sides the same with the wheel tire off (so it is not a tire...
  3. HemiDenny

    engine harness for $$$

    I might be new to the engine electrical management for the Gen III into out A body's, but who and what is the best to use? I believe I have read that the OEM harness that came with the engine has too many circuits that if left unconnected can confuse the computer. for clarity, I am...
  4. HemiDenny

    [WANTED] 3:55 / 10 spline gear set for 742 case

    looking to buy a good set of 3:55 ring / pinion for a 742 case. We have a set of 3:91 to trade if interested. Willing to trade or buy trade entire pumkin (only 489 or 742 case w/ sure grip) if interested. Going to Butch Leal / Tulare Ca.....looking for more top end I guess.
  5. HemiDenny

    [Found!] firewall / tunnel section

    looking for a section of the firewall. Approx. 12"-14" radius around the trans tunnel including portion back to the floor pan seam. need to fill this hole. Would like an extra 3"-4" of firewall around the opening pictured. slight surface rust OK pics and price (including shipping to NW Ohio...
  6. HemiDenny

    [Found!] radiator support

    I need a nice, rust free (surface only ok) unmolested upper radiator support from 67-76 A body. A rough cut to remove is A-OK, I prefer to remove the spot welds myself. The lower portion can me bent, I will not be using it. e-mail or text pictures and price to Denny hemidenny@rocketmail.com...
  7. HemiDenny

    [Found!] fresh 440 w/ aluminum heads

    looking for a fresh 440 (.030 over A-OK), prefer aluminum heads for a street / pump gas build within easy driving range of Findlay, Ohio. H beam rods a plus. let me know what you have and price. Denny hemidenny@rocketmail.com 304-939-0097
  8. HemiDenny

    heater hose routing on 72 small block with OEM A/C

    just need to verify heater hose routing with the OEM vacuum operated water shut off valve. currently I have from water pump to right side (looking from front of engine) heater fitting.....out the left side , thru the shut off valve with the vacuum port pointed to forward ....then to the intake...
  9. HemiDenny

    speedo pinion gear selection

    speedo is off about 5mph........... @35 it reads 40, @ 55mph it reads 61. currently I have a 38 tooth pinion which is what Brewers chart shows for a 27" tall tire (275 / 60 / 15) with a 3:91. I verified it has 3.91's and installed the (blue) 38 tooth speedo pinion myself. I'm thinking a 39 or...
  10. HemiDenny

    Dodge ChiefDonutMaker contest video application

    I got my application in.....anyone else?
  11. HemiDenny

    [SOLD] Hurst Competition Plus shifter

    extremely nice OEM / bayonet style A-body shifter. I bought it with some other parts so what you see is what you get. $275 to your door (continental USA only)
  12. HemiDenny

    window regulator crank assist adjustment?

    working on 72 Duster. what does this adjustment do? I'm guessing it makes the coil / clock spring in the regulator tighter or softer to allow for easier window crank assist, but do not know. Hate to experiment on a finished ride. Thank you in advance for any input
  13. HemiDenny

    [WANTED] small block bellhousing for 3-speed

    looking for a small block bellhousing to use in mock-up with my 3-speed cases. please price with shipping to Bowling Green, OH 43402 feel free to text or e-mail pics and price to... hemidenny@rocketmail.com 304-939-0097 Thanks, Denny
  14. HemiDenny

    [Found!] spindle washer for 9" front

    need one spindle washer (goes over outer bearing) for 64-72 small A body spindle. Thanks, Denny
  15. HemiDenny

    [Found!] radiator support brace

    looking for the support brace from the front /center K -frame to the lower radiator support. must fit 72 Duster. text or e-mail pictures and price including shipping to Bowling Green, OH 43402 to... hemidenny@rocketmail.com 304-939-0097 Thanks, Denny
  16. HemiDenny

    clutch pedal binding?

    looking for help.....as I get 10 minutes or so into a normal drive, the pedal starts feeling like something is sticking somewhere in the pedal / linkage. If I disconnect the linkage, everything independently moves perfect. It appears as the drive line warms up, it starts to creak/ groan and...
  17. HemiDenny

    [Found!] 273 / 318 biscuit style mounts

    need the engine brackets for 273 / 318 biscuit style mounts. text or e-mail photos and price shipped to NW Ohio 43402 Denny 304-939-0097 hemidenny@rocketmail.com
  18. HemiDenny

    [WANTED] tuff wheel adapter

    Tuff wheel adapter wanted for Butch Leal street build. PM, text or e-mail info to.. hemidenny@rocketmail.com 304-939-0097 Thanks, Denny
  19. HemiDenny

    [Found!] small block 90 degree oil filter adapter assembly

    in need of 90 degree oil filter adapter assembly for small block. please PM, e-mail or text price w/ shipping to 43402 (NW Ohio) and picture to .... hemidenny@rocketmail.com 304-939-0097 Thanks Denny
  20. HemiDenny

    [WANTED] 72 duster OEM radio

    looking for working OEM radio for 72 Duster. Let me know what you have. Thanks Denny hemidenny@rocketmail.com
  21. HemiDenny

    [FOR SALE] TTi Gen III headers (test fit special)

    TTi #61HCA-R2C4 headers. test fit only, customer has starter on passenger side and these are for starter on drivers side. $867 list....sale $649 plus flat rate shipping of $50 anywhere in lower 48 (with shipping to Canada available for additional charge). 1-3/4" primaries with ceramic coating...
  22. HemiDenny

    HDK upper control arms with built in caster increase. No more bind.

    HDK now offers its latest version chromoly tubular UCA assemblies with built in caster increase for the 73 and up (disc brake conversion) spindle. This same UCA is used with the HDK coil over only conversion. Install the control arm with the supplied aluminum spacers on each side of the...
  23. HemiDenny

    which side?

    this spindle has two R's stamped into the face.....but the caliper brackets mount holes would be on the front if mounted on the right / passenger side. Please school me. Is this a R or L spindle?
  24. HemiDenny

    [WANTED] manual steering column small parts

    I would like to purchase the key lock return spring and bumper for a 72 Duster manual column.
  25. HemiDenny

    rear sump oil pan for slant six

    looking for a picture....or source for a rear sump oil pan for a 225 / 6cyl. Thanks, Denny
  26. HemiDenny

    Spark plug advice

    What is a good plug to start with for a 408?....10:1 compression. Lumpy (don't know specs) hydraulic cam. Might be over carburated....thinking 750 cm Eldelbrock. Thanks in advance for any input. Denny
  27. HemiDenny

    Hemi Denny needs your vote

    Hi Guys, Can I get your vote?....ends tonight. taking the top 3...giddy-up! for my nephew ....Travis Philo. Eldoras Governors Reign winged sprint car race is an invite only....Travis is maybe 100 votes short of the top 3 in the fan vote to get in. Fan Vote: Governors Reign at Eldora Speedway...
  28. HemiDenny

    [Found!] glove box plastic latch bezel

    platic bezel for the glove box latch. for a 72 Duster lid, but I would guess any Duster like glove box lid is the same.....any color. ship to NW Ohio 43402 Thanks, Denny
  29. HemiDenny

    [WANTED] bucket seat bump stop

    A?B/E ? bucket seat bumpstop......just need one.
  30. HemiDenny

    [Found!] Bucket seat release bracket...see picture

    got a NFG rusty / crusty bucket seat back? .....I need just the release bracket. Just cut around it, I will pretty it up for the re-weld. Thanks Denny
Back
Top