Search results for query: *

The compressor bracket is stamped steel and was originally used on a mid to late 70's vintage 360 engine that had the old R4 compressor. Came from a Cordoba I think. All of my refrigerant hoses were pre-made with the ends already crimped. Since I used a different compressor bracket which sets...

This is the hole in the core support I was talking about that I had to re-drill. Actually its about 4 inches or so. Still have to paint my ash tray but here is what the dash looks like. Yeah someone had already hacked my dash so I tried to clean it up when installing a better radio with the two...

Thought I would finish off this thread and my installation. After getting all the adjustments right I reinstalled the dash control and underdash box. Everything worked correctly. Oh, as suggested by someone I cut the back off the original plastic glove box, shortened the depth, then glued the...

Ok got everything out and on the test bench. Flipped the fan switch around and now the switch lever fan speed matches the display. Next adjusted the small triangle plate they give you to get the control lever matched up, at least as much as it can, with the air diverter doors. On the slide...

Well crap wouldn't you know, had a 50/50 shot and missed.. Put the power to the unit and with the fan on high the switch lever is next to OFF on the plastic control unit. I'll have to take it back out and flip the switch around and remount it. Also the air diverters in the unit based on the...

While I was resting my back, I stuck their new glove box in to size it up, yup pretty bad. I like your idea, the original box only needs to be shortened in depth by an inch or two. My original glove box is all plastic, probably replaced years ago aftermarket. I'll try your solution, cut the back...

Yeah I do have new aftermarket defrost vents. I had an old vent and verified what you said, the adapters from the CAA kit were not the problem.

Hey Mike, yup I spoke with you earlier about your installation, gave me the incentive to give it a go.

Now I am hooking up all the interior wires and installing the vent hoses. Dang it gets kind of crowded up under the dash. Ran into a problem with the defrost vents. The adapters they give you in the kit to attach the air hoses to the vents are to small in diameter, they wont fit the vents. I...

Well now on to mounting the box. The green car in the pic is a 72 Plymouth Duster non AC car, the red car is my 74 Dart Sport non AC car. The motor mounting holes are a different but the motors are the same size and the firewall hole is the same diameter. The CAA box comes with a bracket mounted...

I inserted the switch as far as it would go then drilled two holes in the plastic assy to secure it. I also had to shave a little off the plastic assy where the plug connects to the switch just so I wouldn't have to bend the switch connections. Worked out pretty well. I also used the original...

Well I finally ordered the CAA kit which fits up to 72 and started the installation in my 74 heat only car. Thought I would post here what I have done in case someone else wants to do it. They start by having you install the fan switch. On my plastic dash control assembly I mounted the new...

Not sure i want to go that route yet, got to visit a guy just down the road from me parting out a bunch of 73 up Darts and Dusters just to see if one of them might be an AC car. In the mean time I have to finish up working on a friends original 20K mile 72 Duster /6. Man this thing is a time...

Thanks Mike, yeah they still haven't changed their web site. when I was talking to the CAA guy he kept getting side tracked complaining that owners were modifying their designs to make them fit 73 up non AC cars. They probably don't want to fool with the 73 up because the control assy is plastic...

Well my Dart has waited long enough, finally got her back out of storage and finishing it up. Now got to get off the dime and do something about getting heat/AC into the Dart. My Dart was originally heat only. A long time ago a guy was getting rid of a 72 Duster heat/AC underdash box, evap...

Or this

That looks like a 7.25. 9 Bolt pan. this is what an 8.25 rear looks like

What kind of condition, gear ratio? what do you want for it and how much to ship? Can you provide me with some pics?

Removed from a 77 Dodge Aspen Station Wagon 2.94 Ratio, Big housing will accept larger gear ratios. 54.3 flange to flange 5 x 4.5 bolt pattern 59.5 wheel mating surface to wheel mating surface. I pulled the axle out including the leaf springs. There wasn't a sway bar. Location near Austin and...

For a project I am working on I need a 73-76 ABody 8.25 rear. I also need the leaf spring plates. Hopefully near Austin Texas so you don't have to ship.. Send me PM Steve

Hey Guys, have been here for a long time now. Half way between Austin and Bastrop off highway 71. When I have time and money I work on restoring my 74 Dart Sport. Currently I am looking for a 73-76 A Body 8.25 rear axle. its not for my Dart, it is for a totally unrelated project. Spent a lot of...

Casting numbers 53010187 & 88 Would like to get $50 +$20 shipping = $70 total USPS flat rate shipping box. Or if your close to Austin Tx pick em up.

Here you go. It was a club cab. I've got some fender emblems around somewhere for it also. Make me an offer.

Head light assys, tail light assys, grill, behind seat storage assy, remote mirrors, dash and wiring harness, overdrive switch, turn signal sw, ignition sw, fuse panel, good shape evaporator. Under dash AC heat plenum and various AC dash hoses, vents and such. PM if any interest, I'll take pics

I think its from a 72 Swinger but I wouldn't swear to that. Part number 3501-572 Not in terrible shape. I'll trade even for a like 74 Dart Sport same panel part number 3501-602 . At least its not hacked up. What do you say $30? Local pickup. Yeah I'll ship & Paypal billing. Bastrop Texas 78612

The bumper and chrome is in really good shape, (bottom of picture) not bent. bumperettes not in bad shape either but one does have a little chunk taken out of the rubber . And little marked up where I had masking tape around them. Should polish up fine. Will sell ettes separate but would rather...

Is really dirty from storage but made a clean spot for you to see. Does have one broken mounting tab on left front upper. I have the piece and will send it along. Comes with head light bezels in great shape, not bent or dinged. Does have cracks in turn signal lenses, see pics. $150 local...

Like the title says, its from a 74 Dart Sport. Its dirty from storage but can be restored. does have a heater core but I dont know if its good. The fresh air door where it connects to the housing, the housing is broken but can be fixed. I have the door and its included and you can see in one...

I've got the unit in the title. Came from a 71 Duster. Its a little dirty from storage but I didn't notice any broken or cracked pieces. The fan motor resistor does have a broken lead. I also have the under dash large vent that goes with everything you see in the pics, its like new. The heater...