Search results for query: *

I have a rebuilt stock 78 440 out of a ramcharger in my 73 duster. I am thinking about putting a performer RPM manifold and a comp Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 268/280, Lift .477/.480, Mopar, Big Block, Kit in it. Is anyone running a similar set up and how does it...

I have a 73 duster with a 440 I want to put a Eddi performer RPM manifold I have on it but it a bit taller than the stock is any one running this combo or can someone verify if it will fit and still let the hood close

I have a 440 that does not have a fuel pump or the rod in it can the fuel pump pushrod be installed thru the hole the fuel pump goes in or what is the preceedure

1970 d200 big block 383 camper special long bed pick-up runs drives needs break work one owner. Haz a couple of small rust spots on the passenger door where the trim attaches interior is in great shape still has all 4 hub caps. It is a cool old truck could be a daily driver with very little...

Did some work for a guy but he has no cash wants to give me a 1970 dodge pick-up camper special, it is all original straight body with all the trim pieces a couple of rust spots on the bottom of the passenger door the interior is in great shape though the original radio is gone it is also a 383...

working on getting my 73 challenger back on the road. it ran when i got it, it had been parked for 22 years it lasted a couple of months and the tranny went out, put a new tranny in made it 2 blocks blew a head gasket. it is a 318 2 barrel soon to be a 318 w/ a cam 4 barrel intakeand carb. so...

I got given to me a new cam and lifters the specs are duration int / 204 exh / 214, lift int / 420 exh 442 it would be going in a stock 73 318 2 bbl witch will be upgraded to a wieland action plus intake, eddie carb and this cam and a billet distributor. I got them all for free and all...

Over a year ago i was working on 2 deals on here and my 73 duster when my family sufferd a tragity and i droped off the face of the earth, well i am trying to get back to things and normalcy and wanted to come on back and get back into my project i just hope there are no hard feelings. Thanks

anyone with a challenger with the fender scallops that can give me some measurements / picts so i know where to put them

sorry just found out picts did not work its a project, wa restored than sat in a foeld fot 6 years before he finished th motor, i put a running 360/727 2000 converter, slot mags. needs drive shaft wiring and tranny linkage/lines. i'll have pict tomorrow, it has to go and i dont want to part it out.

Can anyone tell be where to find front and rear windshield gaskets for a 73 challenger, or are they put in with that buytle stip. I can find them i just got a challenger and as soon as i can get the windows in it will be my driver till the duster is done

I need the part number for a steering coupler rebuild kit for a 73 duster with power steering. the dealership here says there is not one but i know i have seen it talked about on here

i have a 78 440 in my 73 duster, it has been rebuilt to stock spec's i want to try to get to 400hp (or close) can i do this with bolt on parts. i did not rebuild it myself i was told it was stock except for .30 over and it had heads off a 72 charger. what do you guys think, intake carb...

ok, i have nason epoxy paint (only kind i can get here) is says non sanding. it that true for all epoxy paint. i want to put it on my duster do my body work over it. will this work.

Are ralley mirrors two different shapes (passenger side oval w/ a point and driver side more rectangular

ok, i rebuilt a 727 but it has no reverse, any suggestions

Ok I JUST BOUGHT A 73 DUSTER TO USE AS PARTS FOR MY 73 DUSTER THE AIR CLEANER SAYS SUPER SIX BUT HOW DO I TELL IF IT IS. PLUS THIS THING IS PRETTY CLEAN SO NOW I DONT KNOW WHAT I WANT TO DO, SLANT SIX 3 SPEED, INTERIOR IS SUPER CLEAN BODY IS STRAIT. I BOUGHT IT FOR THE BUMBERS AND REAR...

Any body ever herd of the slant six club of america i just bought a 73 duster that has a membership sticker on the window with a super six and a three speed, headers dual exhaust this car has been in a garage from 1992-2008 the outside for last 2 years but its all there down to the air...

Sorry to say it has to go. 79 ramcharger 360, 727 auto, 33 x 12.50 tires guns great drives great had a rebuilt engine when i got it. I have all the trim i took it off to paint it, rust free. Just door dings as far as dents has the spare tire rack on the back, fully removable top. The...

Ok, I Have Seats (bucket) Out Of A 72 Duster. I Talked To Legendary Interiors And They Said No One Makes The Foam For These Seats The Springs Are Moulded Into The Foam. In Short I Am Screwed I Have To Build And Carve My Own Foam. Has Anyone Done This Or Refinished 72 Seats. All Suggestion And...

400 bucks opening bid for a beat up oil pan. i am cleaning out my garage http://cgi.ebay.com/ebaymotors/MOPAR-BIG-BLOCK-A-BODY-OIL-PAN_W0QQcmdZViewItemQQhashZitem20af33f69aQQitemZ140378371738QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

i need a spindle for a 73 duster w/ disk brakes Thanks

I have a 73 duster with the interior completly gutted (and i mean gutted) i did not take it apart but i have to put it back together is there a book with pictures that would show this of a bulk of it. Thanks

i have a 73 duster w/ a 440/727 i would like to put a 4 speed in it i have one from a b-body will this work or do i need a a-body four speed what bell housing or am i crazy and would it just b to much work

need help, i am putting together a 727 and i need to know what clutch disks go in the frons pack, the yellowish ones with multiple lines accross the disks or the almost dark ones that are just about smooth

Does Anyone Know Where I Can Find 72 Duster Bucket Seat Foam. If Not Do You Think I Can Use 70-71 Seat Foams And Covers On 72 Frames

i have a 73 duster i am putting back together, is there a good source for all the rubber i will need for a re assembly or a complete kit. what about jims auto has anyone used them.

I Have A 383 W/ An Oil Pickup Tube That Has Been Enlarged To 1/2" I Am Worring About It Sucking The Pan Dry At High Rpm's, Its A Stock 187 Oil Pan In A 73 Duster, Has Anyone Done This. Any Suggestions For Increasing Oil Capacity Or Do Think I Am Screwed

I Have A 78 440, I Was Thinking About Bolting On A Set Of 516 Closed Chamber Heads To Increase The Compression And A New Cam, Would This Work Or Would I Run Into A Problem.

Lookin For Non A/c P.s. Pump Brackets Any One Got A Set