Search results for query: *

as stated,speedo cable or info as to what kind of vehicle would fit that i could get from an auto parts store?

HELLO,I NEED THE PIECES THAT STOP THE TIRE FROM SPLASHING WATER INTO THE DOOR JAMB AREA( INNER FENDER SPLAsh shields) and disc brake spindles 1973 swinger.

sorry ,sold

in need of 440 emblems,a stick on may be preferable,as my 73 dart swinger didn't come with a 440 so it won't be made to fit anyway but i'll make them fit,show me what you have.

would you have a good rear view mirror and a dome light 1973 swinger?

am looking for a rear view mirror and dome light with good chrome?1973 swinger

am in need of a rear view mirror and a dome light?1973 swinger

also joel am in need of a dome light with good chrome,lense not needed/1973 swinger. also i have the swinger emblem installed on the front fenders but still have 2 mounting holes left to the right and under the swinger emblem.do you know what goes there and do you have anything.

do you have a good chrome rear view mirror and or a dome light with good chrome,don't need the lense.

hello again joel,am in need of a good rearview mirror,chrome must be very good.

guess i'll just have to try it. just ordered a bunch of interior stuff from legendary interiors,they said at least 4 weeks,thanks.

legendary interiors is advertising a replacement plastic headliner,it appears you can get it with a foam backed material,but will cost about 300.00 plus 65 shipping,but it is not theirs and they say they have had some complaints on fitment,does anyone have any experience with these or know of...

i'd be interested when your ready,shoot me a price with shipping to 32305

yes,thanks everyone,will mess around a little with the bump steer stuff,but may scrap the idea.it can be put back to stock easily enough and then i'll be back to exhaust manifold fitment or headers,still difficult,and pricey,the rack deal using salvage yard parts cost me about 200.but i do...

some pictures of how the steering column ends up.that crossmember its mounted to doesn't hang down lower than the bell housing,it places the rack in beween the oil drain plug and the trans inspection cover with room to get a socket on drain plug and converter bolts.

its hard to tell from the pictures but the rack runs under the pan right where the center link did before,the worm gear part of the rack is the only thing lower,but not as bad as it looks.the purpose of this contraption was to allow the use of any old manifold,and to keep clear of everything...

some pictures to go along with previous explanation

going to post some pictures soon i hope,just learning the picture thing,see some on my newly posted photo gallery.

tryed to put a rack +pinion in a 73 dart,had drum brakes,installed spindles and rotor set up out of a volare,the tie rod is sitting level just like the control arm,but when i move the car and turn the wheels it pulls the suspension down to where the l.c.a. and tie rod now are pointing up...

sold the torsion bars ,don't know how to mark as sold or delete the ad?

yes,they are.

does it matter which end goes in first ,the numbers on the end of torsion bar facing out at the end of crossmember? and is left considered sitting in the drivers seat,meaning drivers side is the left?

didn't get the p.m.

no,but since it went down i adjusted it up with the weight on and it looked good till i backed up over this bump and pulled it back in over the bump again?

hello,just put a set of poly u.c.a. bushings,stock rubber l.c.a. bushings,poly strut arm bushings in my 73 dart,now when i adjust torsion bars to a ride height where the fender is above the top of the tire,if i back out of my garage and over a bump the car lowers itself way down,if i jack the...

ad in mechanical parts for sale.

1.030 p.s.t. torsion bars.installed but not used ,as the ride height was too low for my size tires,150.00 dollars plus shipping. please respond by private message,for my phone# or e-mail address,or just a reply.thanks

sent a p.m to ya,but you are correct,if you want correct ride height you can't use pst bars,while you can get close it requires you to position the adjusting arm (that the adjustment bolt hits up against) at nearly 11:00 position,pointing right at the corner of the frame rail,with only a...

looking for ac condensor and moulding on the beak( front header 73 dart) thanks b.d.a. tallahassee florida