Search results for query: *

  1. Jmcginnis89

    Clutch fan possible?

    Did the electric fans work? i am having cooling isues and only have 2.5 in of clearance. Needing help
  2. Jmcginnis89

    Duster 383 cooling issue

    I dont have a good fan and clutch. but i only have 3 in of clearance
  3. Jmcginnis89

    Duster 383 cooling issue

    488 ci the only cheap part on the whole car is the water pump and thermostat it has eagle crank Eagle rods Ross forged dished pistons Child’s and Albert molly rings Billet main caps Melling oil pump Moroso chrome pan Crain 1.5 gold rockers and shaft Mopar performance housing Molly push...
  4. Jmcginnis89

    Duster 383 cooling issue

    Copper core don’t remember temp, timing is set at 12 degrees 32total and yes on vacuum. It is 488ci and no it felt like it ran stronger this winter then it does now I blew the trans and had it rebuilt and now that summer is here it is having the cooling issues.
  5. Jmcginnis89

    Duster 383 cooling issue

    Pulleys measure 6.5-6.5
  6. Jmcginnis89

    Duster 383 cooling issue

    No hood to radiator seal. CFV said the pulleys were 1-1 ratio. I’ll check for cold spots In The am it is 110 out side rite now. but when I start it up temp rises to 180 then goes back down and then up to 180 and back down again before it starts climbing past 180 to 200 at idle. But when I put it...
  7. Jmcginnis89

    Duster 383 cooling issue

    I had a small 2 core then a 4 core and now a large 2 core and is staying cooler longer with the larger 2 core and it’s not running lean
  8. Jmcginnis89

    Duster 383 cooling issue

    Dual 12in fans from Engineered Cooling Products they are pullers and seem to pull very well Housing is Mopar Performance with after market pump with 180 stat and yes on the sonic check
  9. Jmcginnis89

    Duster 383 cooling issue

    I have a 74 duster with a 383 60 over stroked. I am having cooling issues it has the 26in radiator with a 180 stat and a 165 stat relay serpentine setup with dual electric fans runs great and stays at 180 when parked but after driving for about 20 min it jumps to 220 and will not cool back off...
  10. Jmcginnis89

    96 360 magnum

    Thats what i figured out so now i have to get a different timing cover so i can run the pump that i want thanks for all the help every one ..
  11. Jmcginnis89

    96 360 magnum

    All the parts store have are the ones that don't match up to my 96 timing cover on the bottom bolt holes so I will have to order Mancini racing on Monday .
  12. Jmcginnis89

    96 360 magnum

    Is there a certain year or model I can pick up from a local auto parts store or is that it
  13. Jmcginnis89

    96 360 magnum

    I have a 96 360 magnum all stock changing from efi to n/a. What year water pump do I need? I bought a 78 pump and bottom bolt holes don't match up ??? Anyone..
  14. Jmcginnis89

    74 /6 to 96 360 magnum motor mounts

    Thank you guys these will help ..
  15. Jmcginnis89

    74 /6 to 96 360 magnum motor mounts

    Where and what part # do i need to put a 96 360 magnum in my 1974 Plymouth Duster /6 car ?
  16. Jmcginnis89

    96 360 magnum from efi to carb

    74 plymouth duster
  17. Jmcginnis89

    96 360 magnum from efi to carb

    and will i have to modify anything else..
  18. Jmcginnis89

    96 360 magnum from efi to carb

    What in take do i need for this to work?
  19. Jmcginnis89

    [FOR SALE] Slant six engine and performance parts

    I have the collector studs and nuts and butterflie washers
  20. Jmcginnis89

    [FOR SALE] Slant six engine and performance parts

    300 motor and 275 intake and 425 headers obo just trying to get what I have in them bought about 3 months ago and 300 on motor I don't know what they are worth I just took it out of car have all parts for it
  21. Jmcginnis89

    [FOR SALE] Slant six engine and performance parts

    Everything separate or together
  22. Jmcginnis89

    [FOR SALE] Slant six engine and performance parts

    Will post better pics when I get to computer
  23. Jmcginnis89

    [FOR SALE] Slant six engine and performance parts

    Is any one interested in a slant six and trans and a Clifford intake and a set of headers I think they are Aussie ? Motor is out of my 74 plymouth duster it only has 3910.4 original miles on it ran good just took out today and can't find any one to do good machine work on a slant so am selling...
  24. Jmcginnis89

    How do I tell if I have a 225

    Finally got it to work
  25. Jmcginnis89

    How do I tell if I have a 225

    The is about 2 1/2 to 3 in of bypas hose
  26. Jmcginnis89

    How do I tell if I have a 225

    I can't get a pi to post on here the number on the head is 2843169-2 and the only thing I found on the block under the intake is 2806830-4 it's in a car and has a fender stamp just can't post pic for some reason
  27. Jmcginnis89

    How do I tell if I have a 225

    Where are the # on the block and head I need to look up
Back
Top