Search results for query: *

Hi everyone, I was just looking for a part for someone in my garage attic and came across 2 bellhousings. The first is a slant six bell with the number 2402692 stamped on it. The second one I believe is out of a truck and the number is 4302503. I'm thinking that $100.00 each is a decent price...

Hi there everyone, I was just wondering if anyone on here has looked into having just exhaust manifolds made up for 273 to 340 or 360 conversions? I have the original 273 manifolds on my 340 in my 64 Dart GT right now, but I'm thinking that I might check out some different options like having...

What would cause a delayed upshift from 2nd to third? This is a 1964 a-904 pushbutton in a Dart. I checked the fluid and it appears to be overfilled, checking with the engine and trans. warmed up and running.

I was looking on Ebay the other day for any publications for my car and came across this for $11.99 plus shipping.

Hi everyone, I was cleaning up my engine bay the other day and I noticed that I was missing 2 pieces of weatherstripping that goes against the hood on the top of my headlight bezels. This is a 1964 and 63 only piece, I believe. I am not sure what the official name of the piece is. I was able to...

Hi everyone, does anybody know if a secondary FSM for 1964 Dart with V8 was published?

Hi everybody, I was just wondering if anybody had a JPG or SVG file picture of the 64 Dart GT emblem to share with me, so that I can make a stencil to use for powdercoating a Yeti type tumbler and insulated coffee mug?

Well I just received my disc brake conversion kit from Classic Ind. yesterday and was nervous because the box was all torn up and opened and re-taped by a toddler. I opened the box this morning and was shocked to see that all the parts were in fact, in there. So at noon time I took the car out...

Hey everybody, I am looking to find what is an original style windshield washer tank for a 64 Dodge Dart GT with electric pump. If anyone has a picture of one, I would appreciate it if you could post it here so that I might be able to find one for my car. Thanks, Clay

Hi everybody, Hey while at a car show last week, I saw a 1964 Dodge 440 with a hemi in it. What struck me as very peculiar was that it had offset motor mounts to get clearance for that great big hemi engine in the engine bay. My question now is: why can't we get some kind of offset mounts for...

I really just started to notice that when I go to car shows, early A-bodies don't really get any respect! The people walking around stop and say, "nice paint" or "I like the wheels", but it isn't until I open the hood that I might get a "whoa" or similar comment. With the general lack of early A...

Hi, I did a master cylinder upgrade to a dual master, but I feel like I don't have enough pressure to stop the car quickly if I had to. The brakes were bled, and it seems to have a high enough pedal, but when I try to apply brakes I feel like there isn't enough stopping power. I also upgraded to...

Where can I find a PCV valve that fits into the cap on my drivers side valve cover?

I would love to see an in depth instructional video of installation of all the various weatherstripping on an early A-body. My friend that painted my car for me was not schooled in the techniques used to install all of the different pieces of weatherstripping and he installed some of the pieces...

Hi everybody, I have a 64 Dart GT with a pushbutton trans. has anyone on here replaced just the buttons on the shifter setup?

I have a 64 Dart GT and my fuel gauge and temp gauge were bouncing up and down the other day, then just went to zero and stopped working at all. What should I be looking for? I have been reading a few posts and there is a lot of talk of bad IVR. What does it even look like, so I can check it...

Hi all, I decided to rebuild, and swap in a 8 3/4 in my dart now that I have a little more power under the hood. Tired 273 gone, healthier 340 in its place. I know there are a few things I have to do, but the one thing that has me wondering is, can I just figure the length of the driveshaft by...

Hi everyone, I just tried to roll down my drivers side window and the rubber weatherstripping must have unglued itself somehow over the winter. I need to get new rubber for these and I am not sure if I need flocked or unflocked for this. Also any ideas on where to get these would be greatly...

Hi, I have recently made a few sets of the inner trim rings for 64 dart tail lights. I 3D printed them with ABS and sent them out to be chromed. I had to have at least 10 pieces to make the minimum amount and still be a good deal if i was to sell any of them. I will sell them for $80.00 per set...

A-903 tranny out of 1964 Dart. Free for you, come get it. It will go to scrap yard very soon if there are no takers. Just asking if anyone wanted to use to restore a 3-on-the-tree car with original equipment.

I am looking for both left and right exhaust manifolds from 72-76 340/360 A-body manifolds. Needed for 273 to 340 swap in 1964 Dart.

Hi all, It seems that the site reverted back a couple of months and, while I do have most of the info that was given to me, I might need some addresses sent to me through PMs. I will re-post all the pictures of the stuff that I made for any future interest. Thanks

Hi, what does everybody do with installing a340 in a early a body with the exhaust? The early A 273 manifolds have openings that are too small for the ports on the heads. Any easy solutions?

I just finished making some center chrome rings for my tail lights on my 3D printer. I found some spray paint that looks very similar to real chrome, and tried it out yesterday. They came out pretty good!

Does anyone remember Tubular Automotive in Rockland, Ma. I seem to remember there was a guy working for them that I knew before I got into cars. And he told me that they made custom headers for race cars and gear heads back in the late 70s.

Is there any issues with installing headers in a right hand drive early A body?

Hi guys and gals, I am looking for a car that runs and will pass inspection in Ma. and is safe to drive. My sister is not real healthy, not working anymore because of her health, and kind of on the low income scale. I love my sister and I am trying to help her out. I will buy her a car, but I am...

Has anyone else started doing this? I am having the time of my life, being stuck at home, and playing with my recently acquired 3D printer. I have just finished designing and printing a bunch of parts for my car, and anyone else who would be interested, by the way. I have designed a 64 Dart GT...

Hi everybody, I just finished first piece of hood trim insert for my GT. I created the prototype on Tinkercad online, and downloaded the files to my 3D printer. I printed a few pieces last night and finally dialed in the settings to print the one in the picture. I know it's not an original...

Is there anyone else that got so fed up looking for hard to find parts so they got a 3d printer to try and make some?