Search results for query: *

I am using Yaris non-ABS ECU with Prius column. It will not work with any other column. I am using pulse generator for now and later will add pulse generator from the reluctor wheel on my Ford 8.8 which will gave me variable speed dependent assist. Waid

Saturn is the largest with Prius about 1/5 smaller and yaris about 1/3 smaller.

The Versa's 3 bolt flange bolt pattern is little smaller but looks like it can opened up little more to accept the Vue.

Tested one more EPS / ECU that works in fail-safe/limp home mode with fixed level of assist. 2008-2011 Scion XD 2008-2011 Scion XD It's almost identical to Prius. The Prius, Yaris and Scion Xd ECU share same exact plug and works with each other. ECU Part Numbers that function in fail-safe /...

The Corolla and Prius ECU will work but there is a little circuit board that you will need as well. This board is built in to the Saturn Vue ECU. The upper steering shaft is same on Saturn Vue and Toyota therefore it will easier to just swap the whole thing out.

I wish I could! Easier to get this at salvage yard for $35!

Yes you can use the EPS with column shift. See the link below! Electric Power Steering 56 Fairlane

The Toyota Yaris is the smallest and the next size up is the newer Nissan Versa that I have not tested but will to bet that it will work in Fail-Safe as well. The problem is the smaller the EPS, the smaller the plastic driven gear and may not take the load of a bigger car. Worst case the gear...

The motor is not noise at all. In fact, I don't hear at all. Almost all new small to medium cars has column electric power assisted steering. It uses a steel worm gear with very hard plastic gear that is very smooth. While sitting up, you can not see the motor. Electric assisted power...

In order to convert my hydraulic power steering rack to manual, I took the valve out, removed the sleeve and tack welded the input shaft to the pinion shaft.

YouTube Videos: DIY Electric Power Steering 1 - EPS with Fail Safe DIY Electric Power Steering 2 - Bench Test DIY Electric Power Steering 3 - Mounting Options DIY Electric Power Steering 4 - In Car Test

This is how ended up with steering column

For later cars with collapsible steering column

This is how I dit the lower part of the column when I had the steering box.

This is how I did my upper steering shaft and steering column.

Wiring Diagrams. Only 3 wires are needed. Power, Ground and Ignition On

It has been a while since I posted on this forum. I am not making or selling anything. I have posted this on couple of other forums and this is not for everyone. Some of you have manual steering and I though you might like to see how added electric assisted power steering in my 1964 Falcon...

Trailbeast, I am in the process of completing my motor build and I have Ford's Duraspark Distributor with magnetic pickup. When I started to look in to the Duraspark Ignition Module, I realized that they are not reliable and there are other options. When I came upon your post, it hit that I...

In theory, I cound apply .5 volts to the D terminal when the starter is engaged and retarding the timing by 10 degreed thus making it faster start ? Waid

Hello TrailBeast, I am a new member I am here and very interested in this 8-Pin HEI module setup. GM introducted the 8-pin HEI in 1988 - full 14 years after the 4-pin HEI came out back in 1974 so its safe to assume its "better" than the 4-Pin HEI. At one time I had a 77 Olds Omega (Chevy...