Search results for query: *

I picked this up at a swap on the way out and didn't pay close enough attention to it. It was supposed to be for the '71 Dart but am second guessing its application. The box it came in (labeled 1A-FSU-00097) is supposed to be a stainless steel 5/16" replacement for the '71 but from memory, it...

For sale is a New Mopar Performance 340 Restoration Spark Plug Wire Set. $30 shipped to the lower 48. Located in San Jose, CA.

I am looking for a 489 cased third member with either 4.30 or 4 56 gears with either a spool or mini-spool. Because of the weight, I would like to find one in CA (preferably somewhere between the SF Bay Area and LA. Any will be considered though. Thanks in advance. Located in San Jose, CA.

For sale is a rebuilt 727 Torqueflite transmission (small block) originally out of a '72 340 Cuda/Challenger/Dart (ID #PK3681052). It has a forward pattern manual valve body. It was recently gone through approx. 2 months ago. Feel free to ask any questions you may have. Asking $450...

For sale are new vintage drag strip/equipment mnfr decals. These are extras since I have all ready plastered all of my tool boxes, garage walls & cars. With each pic, I will include the quantities available and what they go for. Shipping will be whatever the actual cost is depending on what...

I have a few new 1962 NHRA Drags Retro T-Shirts left over from our local club. All of the larger sizes are all ready spoken for. I have the following: (1) XL - size 46-48 (1) Large - size 42-44 (2) Mediums - size 38-40 They are cool retro NHRA T's in red and are from the NHRA ORIGINALS...

For sale is a NIB (New In Box) window fuzzy/weatherstripping kit for all 1967-1972 A-body 2-Dr Hardtops (except 67-69 Barracudas). Originally, this was a 8- piece kit but I ended up using the (2) rear interior fuzzy strips (which can be purchased separately). Located in San Jose, CA This...

For sale is a brand NEW braided stainless steel fuel line for a Holley 4150. -6 AN Inlet. Red/blue Anodized Fragola Performance Systems Kit (#920002). Comes with new washer/gaskets. Paid $77. Will sell for $57 + SH. Paypal if fine if payment is made through your Paypal balance or if it is...

For sale are NEW Comp Cams Endure-X Mechanical Roller Lifters (part #828-16). There is a set of 16 with vertically linked bars. Summit Link: http://www.summitracing.com/parts/cca-828-16 Located in San Jose, CA. Cost: $435. Asking: $375/BO + SH (or pick up for free)

For sale is a NEW Comp Cams SB Mechanical Solid Roller Cam. I had it nitride coated when I had my solids coated. Specs are as follows: COMPETITION CAMS PART NUMBER: 20-752-9 ENGINE: CRS 288AR-6 GRIND #: CRS 288AR-6...

For sale is a complete new W5 cylinder head, header & intake manifold. package. The (blue core plug) W5 cylinder heads (P4452926) are brand new and have never been bolted to a block. They come complete with an array of (mostly) new Mopar Performance (MP) parts: -(8) MP 2.02 Competition Intake...

For sale is a NEW 750 Race (Drag) Demon Carb. If you are looking for/need one, you will know what this is. This is not a Mighty or Speed Demon, etc; it is a Race Demon. It is not a circle track, oval or general purpose version. It is a Race Demon but one specifically calibrated for Drag...

For sale is a New (not re-manufactured) Pre-70 Cast Iron Water Pump (from Year One). It is for an AC application bwhichs means more flow. It was purchased from Year One for approx $70. It can be seen at: https://www.yearone.com/Product/1966-74-a-b-e-body/yq93 Asking: $45/BO + SH (or...

I am looking for a dual plane intake manifold for a a freshly rebuilt/warmed up 340 (street motor). Used is fine as long as it's in good condition. Am willing to purchase one but am also very willing to do some horse swapping/partial horse swapping for items (with much more to come) I have...

For sale is a super nice polished Offenhauser big block Ford 429 - 460 tunnel ram -Turbo Thrust 360. Super clean inside and out. All threaded holes are excellent - no repairs or modifications. Ready to bolt on. Asking: $275/bo + SH (or pickup for free). Postal money order or paypal with...

For sale are (2) Coker Redline tires (7.75x 15, 4-ply). They are used and show a little tread wear mainly on the inside tread but there is plenty of meat still on them still. They look super sharp. They sell mew for approx. $238/ea. Asking $125/BO for each (payable via postal money order...

For sale is a rebuilt 727 Torqueflite transmission for a small block. It was originally built for a warmed up 340 (and never run) and was assembled with a manual valve body (forward pattern) in order to eliminate any issues with the kick down (of course, this was when Lokar products were not...

For sale is a very nice original black steering column cover. No cracks, scrapes or,chips. Picture shows it as is - no ArmorAll or any cleaner on it. PN: 2822789 Located in San Jose, CA. $25 + SH (or pick up for free)

For sale is an AMC 727 TorqueCommand/Chrysler Torqueflite transmission that was rebuilt several years ago for a project that never materialized. It was out of an early 70's Javelin/AMX with a 401 and will work behind the AMC 360 as well (and also the earlier 390 & 343). The...

For sale is a 1970 Dart hood in nice condition. It is straight but looks like there was a little bodywork completed 4"-6" from the front left corner. On the bottom, there is a little rust buildup by a couple of the brace areas towards the front left (please see the pics). Nothing bad. Just...

For sale is a beautiful & original (68-69 A-body/68-70 B-body) woodgrain steering wheel complete with retainer and padded horn cap (w/Dodge emblem). For an all original steering wheel, it is in incredible shape. I have not done any cleaning, polishing/Armor-All'ing to this setup. It is as it...

For sale is an Edelbrock STR-12 Small Block Crossram intake manifold. I think most here are familiar with it. I purchased it from a member here and the plans for it have changed so it's time to pass it on The top plate & bottom base have been polished. As I believe I was told by the...

For sle are (2) new (in package) Lions Dragstrip beefy T 100% cotton t-shirts. There is one XL & one Large. First come - first served. Located in South SF Bay Area, CA Asking $10+ SH (or pickup for free). Prefer postal money or add 3% for Paypal.

For sle is a pair of kick panels. They were originally tan and were painted with SEM black interior paint years ago. They are structurally in great shape. They could use a repaint to be really nice. Located in South SF Bay Area, CA Asking $40/BO + SH (or pickup for free). Prefer postal...

For sle is a matching pair of hood hinges off of a '68 Dart. There worked perfectly when taken off. These will work for several years and models of A-bodies. Located in South SF Bay Area, CA Asking $50/BO + SH (or pickup for free). Prefer postal money or add 3% for Paypal.

For sle is a Plymouth half horn ring that has a red center with the Plymouth logo. This is really a beautiful piece. Took it off a car in the early/mid 80s. The little black spot underneath the chrome center is black adhesive. Forgot to clean it off before the pic was taken. Located in...

For sle is a chrome alternator housing and double groove pulley. Located in South SF Bay Area, CA Asking $25/BO + SH (or pickup for free). Prefer postal money or add 3% for Paypal.

Note: All pieces are available individually or as groupings. Please read on. For sale is a huge collection of new AN fittings/hose/misc. All of the pieces are from Fragola and are brand new and sealed in individual packages. FABO members take 10% off the prices listed below. Any orders over...

For sle is a 11" stall converter (rated at 2400-2800 rpm) from JW PerformanceTransmissions in FL. It came with my transmission from them but am going to a higher stall with the new motor. JW is a serious trans/converter builder so they consider this a very mild application but works really well...

For sale is a beautiful 1936 Plymouth grill shell & support. You will be hard pressed to find another in such excellent shape. It has been soda blasted and sealed in DP-90. There is no rust whatsoever and (as you can see), it is in incredible overall condition. It is ready to be bolted onto your...