Search results for query: *

What about the socket to use my center console came with no light socket just a hole.

Hi Gents, Quick question, i just go a center console that i am going to install into my 70 dart. What light socket could be used for the center console gear indicator?

Got it, aj you are right my carb vent goes into the air horn. Do you have a canister in mind that would work. All I came up with is a charcoal canister with a purge valve Dorman 911-261(charcoal canister) + ACDelco Professional 215-700 Vapor Canister Purge Valve

Sweet any specific canister I should use? should it have a purge valve? The carburetor only has a spark vaccum port and no bowl vent.

Hi gents, I recently got. My 440 into my 70dart, a younger me decided to. Throw away the vapor canister. I question I want to use a canister for the smell. Which one do you guys recommend doesn't have to be in the an ORIGINAL. Also how would I go about connecting it I have a quickfuel bd850...

Sorry here you go

Hey guys I got a brand new dizzy for sale it didn't fit with my rpm performer heads so I'm selling it. New in the box D7143700. IF you are in Los Angeles or San Francisco let me know you can do local pickup only. I'm asking $300.00. That's 30.00 cheaper than in stores no tax. This a flame...

Hey guys i need a connector replacement for my 1970 Dart 8 pin connector. Its not the steering column i believe its for the starter and ignition. The power terminal (red) is burnt. Does anyone have any idea where to get it? it looks something like the picture below. Is there a website or does...

So i get Mallory works but is there any with vacuum advance that will also work?

Lockedout? Wouldn't you want your timing to advance at higher rpms?

Fishfly, thank you i cant find one with vacum adv :(

Anyone?

Guys, need your help i bought a pertronix distributor and found out my edelbrock heads and distributor dont fit. I had to grind a little off the head to force fit it. Do any of you guys know of a distributor preferably billet that can use my pertronix ignitor module, and uses vacum advance and...

Ok, then from canister to valve breather? or splice it into ported vacuum from distributor?

What would be the easiest? Im thinking of going with this tank REPD670105 1 frontal vented tank. Would it be easier to fix my vented line which is only half missing to a charcoal canister or connect the 1 vented port to the filler tube by brazing it back to the filler tube? Also my carb is a...

Ok so i deleted the vent line as it was damaged. I can create a new one but where do i connect it to? Vapor canister?

Guys, i did the big change and dropped a 440 into my 70 dart. My fuel tank is the 4 vent tubes style tank. Please help i'm thinking of replacing the tank, what tank should i use i do not have to meet any emissions even tho i live in CA (lol). Please help :)

Same Issue i just bought the fast fish rear main seal kit and leak gone! Performance-Engine-Seals Ask for Jeff, tell him Jose from Cali sent you :) guy actually called me two weeks after to makee sure the leak was gone.

at 67dart..do I still need to jump the starter?

I have wrapped the starter in Lava heat wrap, the starter relay is new, I am runing the battery straight into the starter. I run 2 inch primary headers so the headers are touching the starter. it's a mini starter.. if mopar makes a remote starter please let me know which or the ferd one.. or can...

guys I need some help, my 440 starts perfect when cold after 10min runing the starter struggles. I have checked all. my connections and all clean and well. my battery is in the trunk grounded well to the frame and engine to frame. I bought a Ford style remote solenoid but now I hear it might...

Ok ill run all the test

I drive the car and it works fine going forward , so if I pull the land what should I look for if it's the band ? I know that a rear servo would be damaged or cracked have no idea what a bad band looks like or jf just out of alignment

I have no reverse , all gears seem to be working perfectly . I disconnected my shifter and pull the shift cable by hand when I out it in reverse while the car is on Jacks the tire spin forward . . Could this be a bad servo ? Please help . . 727 with a transgo shift kit

im confused on how to get total?

ok now a final piece of the puzzle, i marked TDC using a camera scope at piston 1 i cranked till the piston reached the top then notice the piston stayed at the top for about 6 degrees of being turned i divided it by two and well marked it which came to be 10 on the damper. Would it be possible...

im just worried that i will damage my pistons with so much advance

Hi guys so i just completed my build and broke in the camshaft. My engine is very weird it loves to have alot of advance timing or i might be wrong retard timing when looking at the damper which is a HTC-440 i see it likes 19-22degrees of initial timing no vacuum. I know my damper slipped since...

I primed it with a drill and priming tool straight to the pump I tried starting the engine after priming but no battery power