Search results for query: *

  1. 318MoparGuy

    plug & play head lights

    duster star, I would highly recommend that you contact Crackedback here on FABO and purchase one of his very well made headlight relay plug and play kits. Using his kit removes a major part of the electrical load going through the headlight switch. I installed his kit as have many others here on...
  2. 318MoparGuy

    [SOLD] Couple of Awesome Hardback Muscle Car Books

    Hi Bruce, I will take both books for $20 shipped. I will send a $20 USPS MO to you as soon as I get out of sickbay....if that’s ok with you. Hope the Hokies have a good season and Fuente becomes more of a people person. Send me your address please. GO HOKIES!!!! Thanks Greg
  3. 318MoparGuy

    Hood Pin Lanyard Length

    Hey 69GT, I just went out to measure the lanyard length on my 73 Dart and yes 23” is the correct length. Have a good one!!! 318MG
  4. 318MoparGuy

    73 Dart - How to install DMT hood to cowl and hood to rad support seals

    Thanks DartGTDan...I really appreciate the pictures, they will definitely help me install it correctly. DMT gave me plastic clips as they said they are period correct...hope they do the job! Thanks again for your help.... 318MG
  5. 318MoparGuy

    73 Dart - How to install DMT hood to cowl and hood to rad support seals

    Hi All, As mentioned in the title I purchased new seals from DMT. I looked through both parts of my 73 FSM and was not able to find a section on how to orient and install the seals correctly. Any members with 73 Darts that have installed new seals? Pictures and advice would be greatly...
  6. 318MoparGuy

    [FOR SALE] Vintage Ceramic Beer Steins

    Hi Bruce, I didn’t know VT had a VDT...did they meet in that unmarked room off the bowling alley at Squires? Hope all is well and GO HOKIES!!! Fuente better get his act together this year... Take Care, Greg
  7. 318MoparGuy

    Shout out to JDMopar

    Just wanted to say THANK YOU to JDMopar. When I wanted to send my distributor out to HalifaxHops, he drove out to my home and showed me the correct way to remove my Mopar distributor. When I got the distributor back from Ray, he came out again and showed me how to install it and timed it also. A...
  8. 318MoparGuy

    Shout out to HalifaxHops....a Super Guy!!!

    I sent my 1974 distributor to Ray for a rebuild and a mild recurve. It’s a good thing I did, the shaft bushing fell apart in his hand when he took it apart. He cleaned everything and replaced all plastic parts with metal ones. Checked all tolerances and replaced all old parts with new ones. He...
  9. 318MoparGuy

    Hemi Denny needs your vote

    He just got my vote....
  10. 318MoparGuy

    What fuel line fits the Edelbrock 1404 ?

    Rob, Here’s the picture of the setup. I have Jegs thermal covering over the metal fuel lines to cut down engine heat boiling the fuel...it works good. The Fragola fitting is the black piece on the right. Read my original “Easy fix”thread with my setup.I guess I didn’t explain it correctly...
  11. 318MoparGuy

    What fuel line fits the Edelbrock 1404 ?

    Ok, take care and both of you stay safe.
  12. 318MoparGuy

    What fuel line fits the Edelbrock 1404 ?

    Good to hear and glad I could help...
  13. 318MoparGuy

    What fuel line fits the Edelbrock 1404 ?

    I didn’t know what size fuel line a 1404 took... I’m sure Fragola has Proper size fittings for the 1404 also...
  14. 318MoparGuy

    What fuel line fits the Edelbrock 1404 ?

    Sorry Rob, but I never took any pictures. I’ll see if I can remember to take some today after I finish all the chores and yard work. How’s that breathing machine I sent you to dry your engine air passages working out? Regards to you and Miss Kitty. Greg
  15. 318MoparGuy

    What fuel line fits the Edelbrock 1404 ?

    Hi Randy, Please check out my archive post “Easy fix for 5/16 fuel line to 3/8 banjo fitting on Edelbrock 1406”. Use the “search forum” tab to find it. Hope it helps you solve your solution. Take Care, Greg
  16. 318MoparGuy

    Getting a second chance to live on 7/30/20

    Roy, Real glad to hear that you and your grandson are ok.... that’s the main thing. My Dad always said “vehicle’s are replaceable, people are not”. Take care of yourself and your grandson and all of us at FABO send you both best wishes for a speedy recovery!!!! Take Care, Greg
  17. 318MoparGuy

    Lockup converter question

    Hi Pedro, I am not a tranny guy by any means so I would have you ask Charrlie_S or Trailbeast or any of the other knowledgeable FABO members for their educated opinion. As far as the advantage of having a lockup tranny...when it is in lockup it basically becomes a direct drive (1:1 ratio) and...
  18. 318MoparGuy

    Lockup converter question

    Check out the allpar.com article as it mentions the “shudder” problem and Chrysler’s fix ( different springs) for it. Stay well, Greg
  19. 318MoparGuy

    Lockup converter question

    Hi Charrlie_S, First of all just wanted to say thanks for always sharing your knowledge on A/C and slant6 engines with all of us on FABO. Always enjoy reading your posts on those subject areas. Concerning your question on lockup’s... I have a 1983 A998 hydraulic lockup in my 318 1973 Dart...
  20. 318MoparGuy

    Crazy Gas Gauge

    Mark, Please check out John Wolf and Co in Ohio...they rebuild all types of vintage gauges and Mopar OEM fuel sending units to factory specs. A number of FABO members have sent their units to him and were very happy with his work and now their fuel gauges are spot on. A lot of members try to rig...
  21. 318MoparGuy

    Fuel line hose clamps

    Yep that’s it
  22. 318MoparGuy

    Fuel line hose clamps

    I use StaBil Marine 360 for my 73 Dart...it can sit for a month and I pump it 4 times and she fires right up. I also use it in my 4 cycle Kawasaki Mule, all the 2 cycle weedwackers and blowers and in the Honda’s. It’s formulated for use in watercraft also and does it’s job. I figured if it can...
  23. 318MoparGuy

    Fuel line hose clamps

    72cuda340, I highly recommend ABA mini clamps for this and any hose clamp application...they have rolled edges that don’t cut into the fuel line.They are all made from 304 stainless steel and are very durable. Check them out. I use only ABA clamps on my 73 Dart Swinger and are very pleased with...
  24. 318MoparGuy

    Stock Fuel sender Identification

    C2LtP, I responded to other FABO guys posts after reading that they’re having problems with their OEM sending units. Check out John Wolf and Co. in Willoughsby, OH. He restores/rebuilds vintage gauges/sending units. A number of FABO members have sent their sending units to him and were very...
  25. 318MoparGuy

    Gas Gauge Sending Unit

    DR, Give him a call....I believe he’s in Willoughby Ohio. He just might have a rebuilt OEM sender unit for sale....you never know, it’s worth a shot Take care, 318MG
  26. 318MoparGuy

    Gas Gauge Sending Unit

    Hi DR, I replied to your post earlier but for some reason it didn’t go through. Please check out John Wolf and Co, they rebuild/restore vintage gauges and fuel sending units. A few FABO guys have sent their fsu’s to him and were very happy with his work. Hope this helps your friend and others...
  27. 318MoparGuy

    Gas Gauge Sending Unit

    Jim, Check out John Wolf and Co, he rebuilds all types of vintage gauges/units. A few FABO guys have sent their fuel sending units to him for rebuild and they were very happy with his work. Do a search on here for posts on him. Good luck... 318MG
  28. 318MoparGuy

    [FOR SALE] Charging system wire around 6 or 8ga

    I did the 8 gauge with fusible link on my 73 Dart Swinger and it really took the electrical load off of my headlight switch and bulkhead connectors. Rob really does excellent work and uses quality materials in the construction of his wire arounds. I highly recommend this upgrade to your...
  29. 318MoparGuy

    Old gas questions

    Don’t forget...While you are in there cleaning/replacing hard lines, I would strongly recommend replacing all old rubber R7 fuel hoses to GATES BARRICADE R9 fuel injection rubber hoses. The old R7 fuel hose can look fine on the outside but with the aggressive ethanol gas that we all have to use...
Back
Top