Search results for query: *

What do you recommend for a 1 inch wood spacer for a 1405 Edelbrock carb? Part number and where to buy them will be greatly appreciated.

Can I downshift my RVB to 2nd gear to use as a passing gear

I just installed a RVB 904 in my 66 Valiant.Everything is NEW CRT transmission. John is NOT available until Mon to ask for proper break in. What are your thoughts? Just have to finish plumbing the cooler and want to try it out before Monday.

I am ordering a trans for my 66 Valiant with a 360 LA engine. I want to keep the column shift. What do I have to change on the linkage go to a manual reverse VB trans? Staying with a 904. I also had to put a spacer in to mate the older trans to the 72 360 engine. Any help will be greatly...

First things first. I have a 904 trans with a trans go 2 shift kit. It is in a 66 Valiant with a 360 LA engine. When taking off in drive on the column shifter it does not start off in first. If I put it in low on thr column it with start off in first.I can then shift the shift lever to 2nd...

I have a 66 Valiant and want to remove the gas tank for a clean out or replaccement. My question is what is the easiest way to empty it. Also has anyone used the Spectre replacement tank from Rock Auto? Any suggestions and tips for doing this? Thanks for your input.

I broke the plastic end on my BPE kick down linkage. A new cable with the new end is $95 plus shipping. Would I be better off with a Lokar kick down or bite the bullet and just order a new cable? What are your experience with these kick downs? Which do you prefer and why? I know lots of...

Do you have to have kickdown linkage if you are using a manual forward valve body?

I have a 1966 Valiant that I put a LA 360 in. I took a 273 out. I have the car 360 oil pan and pick up. I have Schumaker motor mounts. The problem I have is the center link has dented the oil pan. The suspension is all new PST parts, What am I missing and how do I correct it? Thanks for all...

I have a 66 Valiant ragtop. My goal is to run in the 14's. I have a 360 (.040 over) Dr Dif 3.55 sure grip Eddy intake Eddy 1405 carb (600cfm) Bullet cam Engine built by Carolina Machine Engines Engine is supposed to produce 365 HP with headers and a 750 (cfm carb) I have stock 273 manifolds...

Does anyone have a source for wheel spacers for SBP to SBP wheels? I need a half inch spacers to clear my rear springs. I really don't want to relocate springs at this time. Any help or suggestions will be appreciated. Thanks

I need 1 front hub for 10 inch SBP drum I need this for 1966 Valiant. PM me with a price if you have one.Thanks

I want to know how cars with heater delete are plumbed. Can I just run a hose from the water pump to the intake without causing an over- heating condition? This is on a 360 LA with an Edelbrock Performer intake. Thank you everyone. What little I know about Mopars I have learned in this forum...

Looking for a return valve for power steering box/ The valve has to have the 3/8 outlet. The one I have is 5/8 and my pump has a 3/8 fitting.PM me if you have one. Thank you

Mancini vs Jegs fan shrouds Which one is easiest to install and which one does the best cooling? I have a 4 row Champion MC526 22 inch radiator.

I picked up some Centerline Wheels and looking for an easy way on cleaning them. (I am lazy) Any suggestions appreciated.

New power steering pressure hose (68-72) Saginaw Pump $35 273 Chrome air cleaner with good decal (nice) $125 dropped base for Edelbrock air cleaner 14 inch $10 1481 Edelbrock carb adapter (new) $10 2 small block distributers (1 points-1 electronic)$10 each Slant six 2bbl intake $75 Small block...

one pair of tail lights $30.00 (pitted but useable) I will be at Norwalk on Sat. July 29th Pm me for a meeting time and place.

2 for $30.00 good for parts I will be at Norwalk on Sat. July 29th. PM me for a meeting time and place.

$40.00 I will be at Norwalk on Sat July 29th PM me for a meeting time and place

$125.00 I will be at Norwalk for Mopar Madness on Sat July 29th PM me if interested for a meeting time and place.

I have a 1967 dual master cylinder on my 1966 Valiant. Does it make any difference which pot goes to the front or rear? This is for power drum brakes. They appear to be the same size, Thanks

I DO have a FSM but cannot read wiring to know what the orange wire from the steering column where it plugs into the connecter is for. 1966 Valiant with column shift Thanks for any help.

I just fired my newly rebuilt 360 and the oil pressure pegged at 100 lbs on my aftermarket gage. Is there a way to check if my oil pump relief valve is stuck? Any ideas?

I need help in installing the idler arm in my 66 Valiant. I cannot seem to find a way to tighten the nut much less torque it. What am I missing? 75 people have read my earlier post with no replies. Is it that simple to do. I am really stumped. Thanks from a 71 year old Mopar dude.

I am replacing all the front end parts on my 66 Valiant. I cannot seem to find a way to torque the idler arm to 45lbs. I just cannot seem to find the right tool to get to it. I do have all the steering assembled and finger tight. I do have the FSM and am trying to figure this out. Do I have to...

Does anybody make a dropped base to install a stock aircleaner top on a stock lid on a 360 with an Edelbrock Performer manifold and a 1405 carb? I want to keep the the original lid and be able to close my hood. Thanks for all replies and this great forum.

What is everyone using for a 360 fuel pump to carb line? Inline tube, Finelines, and Rightstuff Detailing don"t list any. Where to get one and part# would be of great help. Thanks for your help. What a wealth of info on this site.

First of thanks to trhis forum I have been slowly getting my 66 rag top Valiant ready for spring. I am putting an Edelbrock Performer (2176) on a LA 360. I have the Felpro (1213) gaskets with the sealing surface around the ports.(which side goes to the head) Do I need RTV any other place than...

I am in the process of installing exhaust manifolds on my 360 (273) manifolds. With the gasket kit is a plastic bag with 2 small gaskets. It says part #90714 (3 slotted bolt holes)to the rear of the right-hand bank and to the front of the left-hand bank. How do these fit and what are they for...