Search results for query: *

Does anybody know if Dart Sport and Duster trunk hinges and springs are interchangeable?

I'm confused. I have a 98 5.9 magnum that I was doing a leakdown test on before dropping into a 71 Dart. The biggest problem was that I had 100% leakage on number one cylinder. Took the head off and had carbon under the valve seat so I cleaned the cylinders, lapped the valves and put the heads...

I'm looking for the aluminum molding pieces that go between the rear side panel and the carpet for a 71 Dart 2dr. Need both pieces, left and right. Shipping to 37763. Please PM price. Thanks

I need for someone to tell me what I bought. I needed a transmission for my 71 Dart total roller. This one came up and I bought it thinking I can install it until I can find the parts for a 5 speed manual conversion. I don't know what I bought! LOL The transmission is coupled to a 5.2 magnum...

A friend is having some problems on his 68 Barracuda with the power steering pump. Apparently the car didn't have the pump on it when he bought it. Since then he purchased a Saginaw pump but the brackets are not correct. I have a Saginaw pump and brackets that came off of a 74 Dart with a 318...

I'm refurbishing an A/C equipped heater box on a 71 Dart. Are there supposed to be studs that screw into the fan plenum and extend through the firewall? This car was a basket case and the only thing holding the fan motor in was the squirrel cage fan. Any pictures would be much appreciated. Thanks

I have a 71 Dart that I bought as a basket case. I need to know how the rear center brake line attaches to the body. Also need to know how the e-brake cable is mounted through there. Here is what I'm working with. Anybody have any pictures? Thanks

Anybody ever use the 4-1202-BL strut rod bushings from Prothane? My old bushings, that I believe to be Moog, are 3/4" thick. With the washer, 1" thick. The prothane bushing without a washer is 1-1/16" thick. The metal sleeve is 1-13/16". Are you supposed to use them without the washers? I...

I'm needing a right side LCA without the sway bar bracket. I'm also needing a left side WITH the sway bar bracket.I have a mismatched set on one car. Not really looking for rebuilt arms. I don't need the adjusters, bump stops, or bushings. I already have those. But will consider a complete arm...

I replaced the front seal, rear seal, and pan gasket on my 68 904 while I had the engine out (2 years). Now that everything is back together I am having a problem with the dipstick tube leaking. I got several o-rings from RockAuto to replace and see if that is the problem. When I pulled the tube...

Anybody have a diagram or schematic of the alternator? I couldn't seem to find the actual one for the 70's style alternator with alternator/battery connection and two field connections. I just wanted to see what was happening internally with the field windings.

Look who just showed on FB selling parts on Mopar Swap Shop and Mopar Connection Plus. Yep - your friend Justin Figgatt. https://www.facebook.com/justin.figgatt?fref=nf

My 5.2 is installed and I'm finishing up the loose ends. At this point I need to get a serpentine belt installed. I have removed the AC compressor and Power Steering pump (manual steering). I got a short serpentine belt that fits, making sure that the water pump and alternator turn in the right...

Woke up this morning and walked outside. Saw this and thought "Holy Chit! I been dubbed"!

How can you tell which yoke is being used while it is in the car? I'm interested in a 904 that's in a 74 Scamp with a 7 1/4 rear. thanks

I'm trying to help a long-distance friend with 74 Scamp problems. The dash gauges are all fried or broken (missing needles). Does anybody know of a particular fuel gauge that is compatible with the Mopar sending unit? For now, he just wants to get a 3 gauge unit and mount under the dash. Thanks

I need a transmission lever for an automatic with a cable style kickdown. I'm told that just about any of the later models will work. Will have to fit a 904. I also need a single wheel center retainer for the Magnum 500 or Road wheel type cones. Located in Kingston, TN.

I'm selling some parts to another member here and shipping USPS. I've bought a fortune's worth of parts, but shipped only a couple of times. I try to ship USPS flat rate, but these parts won't fit. Here's the issue: I went to the PO to get the flat rate box to see if the parts would fit...

Hey Guys - I just bought a 98 Jeep Grand Cherokee Limited Special Edition! Wow, that's a mouthful! So far I have $125 in a 5.9 Magnum and Dana 44A limited slip rear with disc brakes. Not Bad. I also have a camshaft from a 92 Dakota 5.2 from a previous purchase. Of course, the 5.9 has the cast...

I'm looking at buying a 78 D100. I haven't seen it yet, but it has a slant 6 and 4 speed. The owner says that first gear is not geared really low. Does anyone know what manual transmissions come in these trucks? Thanks

This was advertised locally as "1973 Oldsmobile Delta 88 classic - $15,000. LMAO!! I asked a couple of months ago " what does dubbed mean?". Is this what they mean by dubbed? LMAO!! Again! Don't mean to offend anyone (actually, I do) but why would anyone do this?" Different strokes...

I need a late model, cable actuated shift lever for automatic transmission. Ram, Jeep, etc. I already have the bracket that the throttle pressure (kickdown) cable fits into. Thanks

I have the trans bracket and kickdown cable off of a 98 5.9 liter Jeep and need to install them on a 904. Problem is: The bracket is too tall to mount to the transmission, it hits the tunnel of the body. The other end will attach to the bracket on the 5.2 EFI throttle body. I've seen other...

I upgraded my 68 B'cuda to 73 Duster disc brakes. I came across a really good deal on some reman calipers supposedly for a 78 Cordoba. Everything fit together with no problem, until now. I was mounting a set of 14" Magnum 500's and the caliper outside corners hit the rim. Any body know if there...

My neighbor has a 1998 Ford F-150 that he replaced the water pump and thermostat. He was then having problems with overheating. I'm not sure why he replaced the pump in the first place, I assumed it was leaking. The truck would overheat very quickly while driving at 35-40 mph, then cool very...

Thought I would ask a simple question about preserving RTV Gasket Maker. Just bought the third tube this year, 75% of the old tube dried out and wasted. I keep the cap on and the tube in the tool box. Are there any tricks to keep this stuff fresh? Put it in a zip-lock bag? Put it in the...

I just walked over to the kitchen to turn off the lights and go to bed. There was the "Damdest Thing I Ever Saw"! What the hell is this spider thinking? Hmmmmmm.......Stink Bug! LMAO!!!!!

Well guys - I got the engine in, all wiring hooked up and was ready to test. Turned the key on and no smoke from the wiring. Good sign since I rewired EVERYTHING. So I turned the key to start. The engine went clunk. I already did a thread on this part. Pulled the engine and finally turned out to...

Just posted on Facebook by Eric Clapton. Joe was 70. RIP, Joe! From BBC News: http://www.bbc.com/news/entertainment-arts-30582761

I need to get some parts for rebuilding a 2001 5.2 Magnum. I noticed that RockAuto has a lot of listings for Enginetech parts. I did a search here and on Google, but can't find much information on the manufacturer and quality. Anybody familiar with Enginetech. I need a set of standard rod...