Search results for query: *

Looking for an inline fuel filter between the tank and electric fuel pump on '72 Duster 340 street/strip mid elevens , mostly street . What filter would be good for my set up that isnt restrictive with 3/8 fuel line . Thanks Terry

Does anyone have any experience with the Jegs brand (speedmaster) electric fuel pump ? They are under $50. bucks and have the same specs as the Holley blue pump , same rating and look to be almost identical to the holley pump and $100. bucks cheaper . Please advise and thanks . Terry

I have BF Goodrich TA Radial tires on the front of my Duster and while washing the car today I noticed that the lettering was turning yellowish . I tried washing them with scrub brush and car wash soap but no change . The tires on the rear are Micky Thompson Indy Profile and the white lettering...

Does anyone know the Mopar 'keys' for decoding the block or VIN numbers on the passenger side of the block above the oil pan rail ? Thanks. Terry

1972 Duster 340 Auto. Need the plastic linkage bushings (2) one on the transmission side and one on the frame side. Need a source Chrysler doesn't make them anymore. Hoping there is an aftermarket company that makes these. Thanks.

Who makes good roller lifters ? What are you using in your engines. Will be street / strip use. Thanks D-mailman

The electric furnace I had in my shop died. Been:???: looking at the New Air G73 and G56 shop/garage heaters. Anybody use one of these or know anything about them. Looking to replace this week. Sq. Ft. is about 350 . Please advise and thanks. Terry

Have a '95 Dakota with 3.9 and auto with high milage but runs great. Having trouble finding new bushings and grommets for the linkage down at the neutral safety swithch. linkage is real sloppy and makes adjusting difficult. No parts house has them and dealer says not available anymore. Any help...

Does anyone know what the RPM of the crankshaft is with the larger old style OEM Mopar starter. TKS. Terry

Anyone running INDY/RHS LAX heads on their 408 stroker ? Thanks for your input. Terry

Anyone have any experience running Comps Solid roller 288R . It specs out at 288 advertised with 244 @ .050 both sides and .550 lift both sides. Comp says it is their best selling solid roller for street and strip small Mopars. Was considering this cam with .030 340 with 9.5 CR with...

Tire store beat on and ruined one of the aloy wheels on my '95 Dakota . It is a factory (stock) aloy wheel .They are trying to find a replacement wheel now. Hoping to find one thru FABO. Please advise and thanks. Terry

When I bought my 1972 Duster 340 in South Carolina (USAF) in 1976. It had the dealer emblem on the deck lid. I removed that when the car went to painters (1987) I cant find it now and I cant remember the dealer Name. I believe that dealershgip is gone now but it was a Plymouth dealer in...

Wanted factory production main caps for 340 block .

What fuel stabilizer do you use ? I have used Stabil but lost faith in that when I saw it separate in the bottle on the shelf. Have been using Sea Foam, ($$$) and it seems to do a good job but some of my racing buddys say it is too hard on carbs and the fuel system. Rubber and plastic parts...

Does anyone know for sure who made the 4.000 cast cranks for Mopar Performance ? I have one in the box new that I bought about 15-16 years ago. I have heard Scat made them for MP Parts . Didnt need it at the time but picked it up for cheap $265. Thinking about using it for new engine build...

I have been told that Scat makes the MP stroker cast cranks. Can anyone shead any light on this ? Does anyone know for certain , who makes the MP stroker cranks. Thanks.

Does anyone know anything about the new TQ that is is production ? I hear it is not manufactered by Edelbrock. There is an article in Hot Rod mag. but I havn't read it. Anyone ? Terry

I need a 489 case and posi unit. Also need set of 4:30 gears for 489 with 1 7/8 large tapered pinion . Please advise and thanks. Terry

Need 8 3/4 489 case with posy and 4:30 gears. Will consider 4:10 gears. Terry

Turbo Action 3800, does anyone run one of these on the street ? What convereter do you run street and strip wise. Tried a TA 4400 but too much slip on street, GREAT on the drag strip though. I presently have a TCI street fighter 10 " 3500 that stalls 3200 in my car as set up. Just wanted to...

Having a wet carpet on the passenger side of my '95 Dakota I pulled the wipers and the cowling and the plastic grid to expose the area under the cowling. It is full of water and the source of my drip which is dripping off of the heater box plenum. I know there are drains there but I can not...

I am torqued off by Mopar Muscle Mag. of which I have been a loyal subscriber for 20 plus years now. I received my renewal letter to renew for for one year 12 issues for $39.99 . Ok,..but then out fell one of those anoying subscription cards, just about four of them and it was hard to not...

Anyone know the weight of a 3.9 V6 Mag long block complete ? Just have a need to know. Thanks.

I believe the new RHS/INDY 360X heads would be just about perfect on a hot 360 engine for the street. Has anyone installed these on a 340 for the street ? They were intended for a direct bolt on replacement for the aging and now hard to find factory X,J heads. They are bigger in port volume...

Would like to hear some 318 build combo's for a street driven daily driver for my '95 Dakota. Looking for something in the 300-325 horse range and 350 plus torque range. Mild occational towing in the 2000 - 2500 lb. range , small trailer with couple of Suzuki's. Thanks.

We know the new Indy/RHS heads are larger than the std Mopar heads of the past, 894, 915, 576 and so on. But they are smaller than the W2 series heads. I feel the new Indy/RHS heads are an excellent replacement for the older std castings on the 340 and 360 engines. I believe that is what...

Who will be going to the Mopar Southern Classic in Clay City Ky. ? This coming weekend. Oct. 8,9,and 10 . Usually a very good show and race, 1/4 mile too. Terry

Anyone have any input on the power difference between a stroked 318 plus .030 (349) VS a 360 plus .030 (365) Street engine where torque is goal in '95 Dakota 2 wheel drive with auto. Thanks Terry

Does anyone have any info on the HOT Mopar Michael Weston drives on the show 'Burn Notice' ? Really a sharp Mopar there. 6 Pac scoop and all. Thanks