Search results for query: *

  1. rustytoolss

    [Found!] Wanted 1967 727-904 Valve Body

    I got one from " Black Duster " a few days ago...thanks for reaching out.
  2. rustytoolss

    [Found!] Wanted 1967 727-904 Valve Body

    The PTKD was used on production slant six cars starting in 1967. I was lucky enough to find a 67 slant six 904 VB with the early PTKD.
  3. rustytoolss

    [Found!] Wanted 1967 727-904 Valve Body

    If the numbers are correct yes. Being a slant six trans does the valve body have a small Aluninium cover (on side of VB ) held on wth 3 screws ? Would need shipped to 44216.
  4. rustytoolss

    [Found!] Wanted 1967 727-904 Valve Body

    The upper and lower valve bodies each will casting numbers . And each will have a year cast in the EX 65-66-71-etc
  5. rustytoolss

    [Found!] Wanted 1967 727-904 Valve Body

    Looking for a stock unmodified 727-904 Valve Body...All I really need is the upper half with all the stock valves. Would need to see pictures with date code markings. Thanks
  6. rustytoolss

    How many using an A500 overdrive ?

    Is it shifted with an internal cable system ?.. I also had a 64 dodge A100 pickup that had a cable operated 727 ( thing is the cable operated external shift lever) the A100 did not have a parking brake on the trans.
  7. rustytoolss

    How many using an A500 overdrive ?

    I have thought about that..just unsure how you would do it. Part of the problem is that the cable system uses 2 cables. One for gear selection, the other for park. About the only way to do it would be by using the Ebrake for park :(..sound bad. But for those old enough the early push button 2...
  8. rustytoolss

    How many using an A500 overdrive ?

    I bought an A500 out of a 94-95 V6 Dakota. At some point I would like to install it into my 1962 Plymouth Fury station wagon (318 poly engine and A727 trans ) . the big issue is that the 62 Plymouth has the pushbutton gear selector system ( which I want to keep) . A&A transmissions has a...
  9. rustytoolss

    How many using an A500 overdrive ?

    The yoke you purchased...does it use the 7/8 inner circle type ujoint retainer clips ( regular mopar style)...or the full circle outter GM style ujoint retainer clips
  10. rustytoolss

    How many using an A500 overdrive ?

    I ask if there was a slip yoke spline difference between 727 and the 500/518 ....no replys . I read this a while back. Maybe it was incorrect, not sure. So what have you guys been using (that has not created any problems) for the driveshaft slip yoke ??
  11. rustytoolss

    How many using an A500 overdrive ?

    As for the driveshaft slip yoke, I've read that "there is a difference" and that a 727 yoke fits...But not correctly. And that the 500/518 yoke should be used. Any input about this ??
  12. rustytoolss

    Car audio guy here....

    Thanks, I don't plan on covering every SQ IN of surfaces (maybe 50-60 % ) firewall, floor, roof, doors, the wagon has alot of surface area and would get costly fast. Did it lower the road noise in your car ?
  13. rustytoolss

    Car audio guy here....

    My interior is out of my 62 Plymouth right now. Have been thinking of using Kilmat also. Did you notice any smell/odor from the kilmat, also did it help any with reducing interior temperature >
  14. rustytoolss

    Small Alternator single pulley

    Not sure, I'll check that
  15. rustytoolss

    Small Alternator single pulley

    What were some of the smaller (single pulley) pulley sizes that were used on the old round back/ square back alternators ? Who sells them ?
  16. rustytoolss

    Looking for a Denso alternator with single V belt

    Need a small alternator (say 90amp) . What year, make,model will fit a small block mopar ? with single V belt. Oh also external regulator type.
  17. rustytoolss

    later model 78 amp alternator?

    Old thread....what year/model had the 78 AMP alternator ??? Thanks
  18. rustytoolss

    OEM 15" Rallye wheel widths ?

    Found two 15" Rallye wheels that I forgot about. Can anyone tell me what width the 15" Rallyes wheels were from the factory...I think that they are the large bolt pattern. Thanks
  19. rustytoolss

    Saginaw (canned ham) PS pump on early 318 with cast iron WP ?

    Thank you that's what I'm looking for.
  20. rustytoolss

    Saginaw (canned ham) PS pump on early 318 with cast iron WP ?

    Can a Saginaw (canned Ham ) PS pump be used on an early 318 with cast iron WP (pre 1970) since the pulley alignment changed with the later LA 318 engines. What brackets would be needed ? Just looking for some information. Thanks
  21. rustytoolss

    color of Turbine car... Question

    Yeah I've heard that before , that the color was not used on production cars....but MM1 was a close a you could get. Thanks, Thinking of painting my 62 Plymouth wagon that color. Want to two tone, just not sure what color to do the roof. Don't want to do the roof black...we'll see . So did...
  22. rustytoolss

    color of Turbine car... Question

    You never Know....yeah you're right , not a chance in hell Jay Leno would ever own one of my cars.., Like he could even afford it ! :)
  23. rustytoolss

    color of Turbine car... Question

    I once saw a report that the Chrysler Turbine car,s paint color " Turbine Bronze" was never used on production vehicles. And the paint code MM1 used on 1966,67,68 Dodge,Chrysler,Plymouth cars was a close match (but not the same exact color as the real Turbine cars). Is their any truth is...
  24. rustytoolss

    rethreading thermostat holes from 5/16 to 3/8 ?

    Thanks, I just checked a Drill Tap chart, 5/16" is the correct drill size for a 3/8"-NC thread. Did a test with a 5/16 nut, you can tap it to 3/8-NC no problem.
Back
Top