Search results for query: *

Hello, I am in the process of upgrdaing my 68 GTS to offset spring hangers, cal tracs and a j60-15 rear tire. Does anyone make a rear spring hanger that is more stout than the flimsy OEM part? I looked at the Mopar Performance replacements online and they dont look much better than stock...

I am looking for an axle that accepts 5/8 screw in wheel studs. One will do but I would buy a set if the price was right. I only need the flange of the axle for a jig to reinforce steel wheel centers. Thank you for looking!

This 4150 base plate was on my Quick Fuel 1050AN 4150 style carb. It might have 5k miles on it. Never exposed to brake clean so the throttle shaft seals are tight. Stainless throttle blades, easy adjust secondary idle speed and convenient vacuum ports await you : D My reason for replacing it...

I have a NIB QA1 tubular k member. These are set up for small block biscuit mounts for you will need a conversion kit if a big block is in your plan. I can provide intel as i have one in my '68 GTS 4 speed car with headers. I'd like $650 and I will absorb some of the shipping cost to male it...

(16) 440 source RB 3/8 x .065 wall push rods for cup adjuster. These fit well on an undecked 440 with PRW roller rockers. $125 shipped in the lower 48 Made in USA! https://store.440source.com/Pushrods-For-Adjustable-Rockers-_-RB-9180-long-Set-of-16/productinfo/105%2D1009/

New set of PRW PQx 1.5 roller rockers and rocker shaft hold downs. These were mocked up on an engine but I ended up going 1.6 ratio. Never ran or heat cycled. There are no rocker shafts or bolts. $175 shipped in the lower 48 states. PRW states these are good up to 600psi spring pressures.

Washable, reusable 11x5" racing air filter from Randy's Racing Filters+. Does not require oil. Brand new, never bolted on. I paid $205, will ship in the lower 48 for $175. I was planning on using this on my 511" lowdeck with a max RPM 6500rpm. Any questions please ask. Very nice parts made...

Is the later spool-type transmission mount usable in my 68 Dart if I utilize the accompanying cross member? Thanks for any insight you might have!

Looking for some front runners for my GTS. Must be SBP in 14" Thanks for any leads!

Howdy, I am considering switching over to a QA1 k member which will require LA to B motor conversion mounts. Any thoughts on which set to use? 440 Source, Mancini and others offer kits. Thank you for any insight!

Howdy, In the interest of removing weight from the front of my GTS I am considering the following caliper upgrade: https://www.summitracing.com/parts/tsb-a199-1 Has anyone used these? The price is stiff so I am doing as much research as possible before pulling the trigger. Thanks for an...

Howdy, I am in need of a safety catch and striker for my 68 Dart. Please shoot me a PM if you have something that will work. Thanks, jd

Howdy, I am looking for clean 73-76 a body center link in good usable condition. Please shoot me a PM if you can help.

Howdy, One of my winter upgrades on the GTS is changing the center link to a 73-76 style for ease of maintenance (header/clutch removal). I currently have a 20:1 manual box in the car. Will the '68 steering box work with the later style pitman arm? In addition to finding a used 73-76 center...

I have a new OOTB set of Hooker 5111HKR headers. Hooker Headers 5111HKR Hooker Super Competition Headers | Summit Racing Summit wants $655 Buy these for $400 plus shipping from 97537 Rogue River, OR

I have a new, never ran set of 1-7/8 Southwest Speed (ebay) big block headers. They have been sand blasted and sprayed in flat black VHT Flame Proof paint. No hardware is included. $300 OBO buyer pays shipping.

One used set of TTI 2-1/8" coated chassis headers for Gen2 HEMI. These have very low miles and just two clearance spots. https://www.ttiexhaust.com/TTiHEMI625-218214.cos.htm These are $1091 new. Asking $750 OBO plus shipping from 97537 Rogue River, OR

I have brand new set of new Doug's D452 Headers for big block. The finish has some abrasion but otherwise they are OOTB. No hardware, gaskets or collector adapters included. Buyer pays shipping from 97537 Rogue River, OR Doug's Headers D452 Doug's Headers | Summit Racing Summit wants $791...

Howdy, We are looking for a set of TTI 2" or 2-1/8" headers for my 68 GTS. Must fit straight plugs / 440 source heads. Thanks for looking and happy holidays!

Hello, I am looking for a Trick Flow 383 ( b block ) intake manifold and a fiberglass hood for a 68 Dart. If you can help the cause please let me know what you have, how much you need to get and where the item is located. Thank you and happy Halloween!

I am unfortunately parting this car out due to it not having a title. The bell, 4 speed and driveshaft are sold. Most of the trim is nice and the outter body panels are relatively clean. I will list parts as they are removed. If you need anything specific just let me know and I will quote...

Howdy, I am in need of a 1/2" spring relocation kit for a 68 Dart. Dr Diff preferred but anything will work. Also looking for a set of cal tracs for the same car.

I am selling this setup because it is for a tall deck and all of my engines are 400 based. Details: This intake has been extensively ported and has a very nicely installed NOS pro fogger kit with nitrous/fuel solenoids on both banks. These kits are setup to spray anywhere from 175hp-450+ and...

$2500 for everything in the pics. I was going to replace the valves and k liners but these could be run as is. Pressure tested w/ indicators and decks checked good at the local machine shop. These are older heads that have some miles but you won't get into a set of ported -1's and Jesel rocker...

Howdy, Up for sale is a MP electronic ignition conversion kit with upgraded chrome ecu. Dyno time only, owner wanted a MSD rtr setup. I traded this for hours worked and all of my cars have b blocks. $150 shipped with insurance in the lower 48.

I acquired this in a work trade. They are $300 plus shipping new. Buy this one for $200 plus shipping. https://www.rcrmetalfab.com/chrysler-426-hemi-for-aluminum-and-iron-blocks.html

This cam came to me in a work-trade deal. I looked up the lobes in the Comp Cams Catalog and they are listed as oval track, marine or endurance. This lobe family is designed for oval track/marine/endurance applications so it will live on the street. It also has a fuel pump eccentric if you...

For sale, 1 Milodon 30931 single external line oil pan with -12 oil line. This oil pan was on a 540 HEMI that the owner detuned and put a reproduction 70-71 HEMI oil pan. I don't think it ever wend down the road. Dyno time and transport/installation wear only. I'd like $250 with the line and...

Howdy, My no prep/grudge car is a 383 4-speed 68 Dart. It currently wears the factory exhaust manifolds on the stockish appearing 451 stroker. We are screwing together a 4.150 stroke 499" 400 block with a solid roller cam and 440 source heads. I stack a 125-200hp shot of nitrous to make...

Hello, I am looking for a set of replacement headers for my Dart GT. Any condition or brand considered. Thank you, Jeremiah