Search results for query: *

Hey Guys I had set my vert in the sun to let the top stretch in shape. When I came back the dash pad had turned loose on the passenger side corner where it turns down. I had purchased it from Year One 6-7 years ago but have never even driven the car. Stayed inside the whole time since. My...

Hey guys, I have never been into radio's, heck never could hear them over whine of a gear drive or open headers any way. So that being said, I have had my 69 AM radio converted to FMR-1 (AM/FM/MP3). It was designed for 4 speakers and has 8 speaker wires and I have them connected according to...

Hey guys, Does anyone have the bulb number for the license light, 69 Dart? Martin

Im in need of an NOS or MINT Used, License Plate Light for my 69 Dart. I have the lens. I need the housing and socket. If it is used it must be MINT! Thanks Guys, Martin

Hey guys, Other than Promax, does anyone make a braided line kit to the 340-6 pack. I'd like to do away with that leaky steel set up. Too hard to align when reassembling. Martin

Hey guys, Cant seem to find this info online. Does anyone know what the correct rear bow height for a 67-69 Dart vert would be? I'm thinking aprox 24.5", but not sure. Any help would be greatly appreciated. Martin

Hey guys, After a long fiasco with my top not fitting, I have decided to rip it off and start over. Im thinking of going with Crush this time around. Any ideas or horror stories on the Crush material from Legendary?

Hey guys and gals, My boy "Sir Bullet of Smith Wesson" (Bullet), is going to be a DAD!!! He is 75% Euro Boxer, 80 lbs constant, Fawn W/white socks, Deep Chest and Champion Blood line. His sire is from Czechoslovakia. The Dam is also 75% Euro Boxer, Brindle and Champion lined as we'll. Both...

Hey guys, I need to pick your brains and beat another dead horse. I have a 340-6 pack that is an absolute fresh build, just ten years old. 372 ci, edelbrock heads, 10.25 Weisco pistons, ,530 Hyd Roller, MP 6-pack and ignition. Other than the dyno break in, I have just now started running the...

Hey guys, After several pulls and restaples of my vert top, my interior guy has broke a piece off of the trim stick that the top is stapled to. It bolts in on the passenger side and has a soft block attached to it so the top can be stapled down. I have not been able to find any repo's, if you...

Hey guys, After several pulls and restaples of my vert top, my interior guy has broke a piece off of the trim stick that the top is stapled to. It bolts in on the passenger side and has a soft block attached to it so the top can be stapled down. I have not been able to find any repo's, if you...

Hey guys, After months of problems with my interior guy, my vert top is just not good enough to satisfy me. I simply want NO wrinkles or puckers etc.. I am more than willing to rip the new top off and have someone else put another one on, if that is what it takes. This is my last build and it...

Hey guys, thought Id post this here also for the Vert folks, Just wanted to let you know we have a Good Guy Alert in progress. I have been in need of 67-9 Vert trim clips for sometime now, after the ones i found were lost by good ole USPS. This was one of three things that kept me from making...

Hey guys, Just wanted to let you know we have a Good Guy Alert in progress. I have been in need of 67-9 Vert trim clips for sometime now, after the ones i found were lost by good ole USPS. This was one of three things that kept me from making the Nats this year after registering in the...

Hey guys I installed the interior windshield trim this weekend and just wanted to make sure my visor to RV mirror is right. Anyone got pics of theres? Thanks, Martin

Hey guys, Thanks to good ole USPS, the clips that I purchased from Redfish, have been lost forever. They made it to within 100 miles of me and vanished, so Im again in need of 6 or more trim clips that hold the rear top trim at the top of the quarters and goes around in front of the deck lid. I...

Hey guys, Thanks to good ole USPS, the clips that I purchased from Redfish, have been lost forever. They made it to within 100 miles of me and vanished, so Im again in need of 6 or more trim clips that hold the rear top trim at the top of the quarters and goes around in front of the deck lid...

Hey guys, Over the many years I have had my car apart, I have lost several things. The Idler arm on my 69 Dart is new, but at some point I must have opened the box and something is missing. I seem to remember a hardened, thick bushing, that went on top and bottom of the idler arm (to center...

Hey guys, I need a horn switch for a repo woodgrain wheel. I prefer a new one, repo OK, or mint used. Thanks, Martin

Hey guys, I got tired of waiting on my interior guy to do stuff on my car so Im putting the console carpet on myself. My question is how high up do I need to trim the carpet. Mine is just taped in from the backside for measurement purposes, but it looks too far down the side of the hump. Any...

Hey guys, Im ready to install my new repo woodgrain wheel on my 69 Dart. I have the wheel and the horn button adapter. Does anyone have a break down picture of what other parts are needed? I can't seem to find it in the shop or parts manual. Thanks, Martin

Hey Guys, I posted this in the Wanted section also, just trying to get more coverage because I'm short on time. Im in need of 6 or so clips that hold the rear vert top trim on. Here are some pics. We are doing the final assembly on the Dart to go to the Nats in August. Any help would be...

Hey Guys, Im in need of 6 or so clips that hold the rear vert top trim on. Here are some pics. We are doing the final assembly on the Dart to go to the Nats in August. Any help would be appreciated.

Hey guys I wanted to post my first engine start up video from IPHOTO to my build page How do I do it? Thanks Martin

Hey guys, I seem to remember someone was selling repo jack hold down springs. Anyone remember who? Thanks, Martin

Hey guys, Im getting very close to finishing my Dart Convertible and have realized that my rear ash trays now look terrible against the rest of the car. Im in need of a pair of NOS or MINT Used ones. Used ones MUST be Extremely NICE! Any and all help would be appreciated. Thanks, Martin

Hey guys, I have possibly found a truck that I am interested in buying. Is anyone here close to Buhler, Kansas, 67522, and would be interested in inspecting that truck for me? Im willing to pay and just want an honest opinion of the truck. I would furnish you with a list of things to check...

Hey guys, I'm contemplating purchasing a new 2017 Ram 3500 Dually with the 6.4, AT, 410 hp and 430lbs of torque. Anyone have one? Yes, NO, Good, Bad? On my 99 Ram diesel, pulling I got around 15 mpg give or take, Im wondering how much less a gas motor would be, 8-10 or so? If anyone knows...

Hey guys, I've decided to try to step up to a dually, so Im looking to trade my 2012 Laramie Crew Cab with 23,000 actual miles for a comparable crew cab dually with a Cummins. Its White with tan leather interior, buckets and floor shifter and I purchased my truck new in May of 12, and it has...

Hey guys, Im looking a 15" space saver tire only (if possible). New, Repo, or used if its in good shape. Brand not important, good shape is. If I have to get rim and tire it needs to be 4.5" pattern. Let me know what you have with pics. Thanks, Martin