Search results for query: *

Brand new Molnar Technologies 4.00" Stroke 340 Crankshaft. Your choice of 2.125" Mopar rod journal or 2.100" SBC rod journal 4.070" Bore x 4.00" Stroke = 416 Cubic Inch On the shelf and available to ship within 24-hrs. of payment on business days. I can sell this delivered to your door in the...

Brand new Molnar Technologies 4.00" Stroke 360 Crankshaft. 2.125" Mopar Rod journals. 6.123" min. rod length. 4.030" Bore x 4.00" Stroke = 408 Cubic Inch On the shelf and available to ship within 24-hrs. of payment on business days. I can sell this delivered to your door in the 48-states for...

Looking for advice on a quality Hammer/ Dolly set from our pro panel beaters on the forum. Not looking for a low quality, Amazon, or Chinese made set. Looked at the Covel set, but figure I am paying at least $100 more for Ron's name on them. Thanks in advance for those that post a reply. Tom

Molnar 4.000" Stroke 4340 Forged Steel Crank with 2.125" Rod Pins for 340 Main Block Molnar 6.123" 4340 H-Beam .984" Wrist Pins, Molnar Proprietary ARP2000 Rod Bolts ICON Premium Series/ KTD .030" over pistons with Premium Rings. Your choice of dished, flat top, domed, to suit the compression...

8- 2.14" intake valves, 11/32" stems, 4.91" length 8- 1.81" exhaust valves, 11/32" stems, 4.91" length Features include premium grade stainless steel forgings, chrome stems, stellite tips, reduced stem, and swirl-polishing. SI Valves are manufactured in Argentina where a good majority of the...

After fighting with an engine crane boom that's been 7"-8" to short for years I decided to make a new one. My problem has been with the engine crane legs beveled outward and the engine stand I like to us also having the legs beveled outward it makes it impossible to get the chain hook centered...

I bought an Edelbrock CH-28 440 2x4 intake last year and never really paid any attention to it until last night after seeing one with carbs for sale on Facebook Marketplace. Then I discovered it only has a small base plate bolt pattern. I am okay with that, but I think it would look tacky with...

New Molnar Technologies 6.123" 4340 H-Beam Connecting Rods. Stock 6.123" length, Stock 2.125" Crank pin, Stock .984" Wrist pin bore. 7/16" ARP 2000 Rod Bolts, Rod Weight 623 grams Part # DH6123TSB8-A $705 Delivered to your door with free shipping. If you need a different rod, length or rod...

New Molnar Technologies Slant 6, 4340 H-Beam Connecting Rods. Stock 7.050" length, Stock 2.187" Crank pin, Stock .901" Wrist pin bore, 1.210" big end width. For use with Forged Crank Only 7/16" ARP 2000 Rod Bolts, Rod Weight 650 grams Part # DH7005UHB6-A $625 Delivered to your door with...

New Molnar 4340 Steel H-Beam Connecting Rods, 6.760" Length, Stock Mopar 2.375" Rod Journal, 1.094" Bushed Full Floating Fit Wrist Pin, 1.017" big end width. 7/16" ARP 2000 Rod Bolts, Rod Weight 852 grams Part # DH6760YYB8-A $720 Delivered to your door with 48-state free shipping. If you...

Molnar 4.000" Stroke 2.125" Rod Pins 4340 Forged Steel Crank for 360 Block Molnar 6.123" 4340 H-Beam .984" Wrist Pins, Molnar Proprietary ARP2000 Rod Bolts ICON Premium Series/ KTD .030" Pistons. Choice of dished, flat top, domed, to suit the compression ratio you want to accomplish. Most...

Molnar 4.000" Stroke 4340 Forged Steel Crank with 2.125" Rod Pins for 340 Main Block Molnar 6.123" 4340 H-Beam .984" Wrist Pins, Molnar Proprietary ARP2000 Rod Bolts ICON Premium Series/ KTD .030" over pistons with Premium Rings. Your choice of dished, flat top, domed, to suit the compression...

New Molnar Technologies 6.123" 4340 H-Beam Connecting Rods. Stock 6.123" length, Stock 2.125" Crank pin, Stock .984" Wrist pin bore. 7/16" ARP 2000 Rod Bolts, Rod Weight 623 grams Part # DH6123TSB8-A $695 Delivered to your door with free shipping. If you need a different rod, length or rod...

Brand new Molnar Technologies 3.91" Stroke 383-400 "B" Block Stroker Crankshaft. 2.200" BBC Rod journals. 6.450" min. rod length. 4.375" Bore x 3.91" Stroke = 470 Cubic Inch Note: All Molnar "B" Block Crankshafts are design to use BBC Chevy 2.200" journal rods. On the shelf and available to...

Molnar Stock Replacement 4340 H-Beam Connecting Rods, 6.760" Length, 2.375" Rod Journal, 1.017" big end width, 1.094" Bushed Full Floating Fit Wrist Pin 7/16" ARP 2000 Rod Bolts, Rod Weight 852 grams. NHRA Approved for Stock Classes Part # DH6760YYB8-A Also now available: Molnar Stock...

My new fiber optic internet that I got in September is great. Spectrum on the other hand is a dishonorable company. I was told when I signed up that my bill would be $82.97 for year as a promotional deal and would then increase after 1-year which I am fine with as that's what I was told and...

Brand new Molnar Technologies 4.50" Stroke 440 Crankshaft. 2.200" Big Block Chevy Rod journals. 6.760" min. rod length. 4.375" Bore x 4.50" Stroke = 541 Cubic Inch. 4.350" Bore x 4.50" Stroke = 535" On the shelf and available to ship within 24-hrs. of payment on business days. I can sell this...

Looking for a set of King MB511XP 440 Main Bearings in Standard size. Not interested in anything other than King Bearings and part number listed. Thanks, Tom

Molnar 4.000" Stroke 2.125" Rod Pins 4340 Forged Steel Crank for 360 Block Molnar 6.123" 4340 H-Beam .984" Wrist Pins, Molnar Proprietary ARP2000 Rod Bolts ICON Premium Series/ KTD .030" Pistons. Choice of dished, flat top, domed, to suit the compression ratio you want to accomplish. King...

Looking for a Rolling Car. Engine/ Transmission not important. Only Interested in 1963-64 Plymouth B-Body Hardtop/ Post/ Convertible Project. Absolutely No Interest in 4-Doors or Wagons. Anyone have anything personally they want to part with? I've searched all over the internet, so I am pretty...

Complete 541" balanced rotating assembly for 440 RB block includes: Molnar 4.50" Stroke 4340 6-Bolt or 8-bolt Flange Crankshaft (Your choice) drilled pilot hole for use with manual or automatic transmission Molnar 7.100" 4340 H-beam connecting rods ICON KTD Premium forged 4.375" bore pistons...

Brand new Molnar Technologies 4.25" Stroke 383-400 "B" Block Stroker Crankshaft. 2.200" BBC Rod journals. 6.500" min. rod length. 4.375" Bore x 4.25" Stroke = 512 Cubic Inch Note: All Molnar "B" Block Crankshaft are design to use BBC Chevy 2.200" journal rods. On the shelf and available to...

Molnar Technologies Stock Replacement GEN II 426 Hemi 4340 H-Beam Connecting Rods, 6.860" Length, 2.375" Rod Journal, 1.017" big end width, 1.031" Bushed Full Floating Fit Wrist Pin 7/16" ARP 2000 Rod Bolts, Rod Weight 853 grams. NHRA Approved Replacements Part # DH6860YVB8-A $705 per set...

Precision Engine Parts/ RPM House Brand "Liquid" Harmonic Damper (Because they can't use the words, "Fluid Damper") 7.25" Small Block Mopar Internal Balanced Flat Face Passenger side timing marks Weight 12.1 pounds Low cost way to get SFI complaint for the track this year. $139 delivered in...

New Precision Engine Parts 4340 4.25" stroke crankshaft for 2.75" RB mains, 2.200" Chevy rod journals, Bullnose counterweights, 6-bolt flange, 6.700" minimum rod length. In a .030" over block this crank will make 505 cubic inches. With .055" over block it makes 511 cubic inches. This crank was...

Brand new Molnar Technologies 4.15" Stroke 383-400 "B" Block Stroker Crankshaft. 2.200" BBC Rod journals. 6.500" min. rod length. 4.375" Bore x 4.15" Stroke = 499 Cubic Inch Note: All Molnar "B" Block Crankshaft are design to use BBC Chevy 2.200" journal rods. On the shelf and available to...

Molnar Stock Replacement 4340 H-Beam Connecting Rods, 6.760" Length, 2.375" Rod Journal, 1.017" big end width, 1.094" Bushed Full Floating Fit Wrist Pin 7/16" ARP 2000 Rod Bolts, Rod Weight 852 grams. NHRA Approved for Stock Classes Part # DH6760YYB8-A Also now available: Molnar Stock...

New Molnar Technologies Slant 6, 4340 H-Beam Connecting Rods. Stock 7.050" length, Stock 2.187" Crank pin, Stock .901" Wrist pin bore, 1.210" big end width. For use with Forged Crank Only 7/16" ARP 2000 Rod Bolts, Rod Weight 650 grams Part # DH7005UHB6-A $615 Delivered to your door with...

Stopped at Alkydigger in Nashville, TN today and bought an Enderle Birdcatcher setup. Took a few photos around their candy store showroom to share with you guys. Tom

I did a 65 cubic inch plenum volume reduction on a Mopar M1 Tunnel Ram top to better suit my intended RPM range usage. I think it turned out very well. A little beveling, welding, smoothing, and it will be ready to go. Tom