Search results for query: *

I will be up in Connecticut week of thanksgiving with empty trailer headed back to Knoxville, TN if anyone has anything to go that way.

Does anyone make or know whats needed to use a 360 magnum with a motorplate?

65 barracuda original 273 commando 4 spd

Can someone help me out if it is truly a one year weather-strip, or is just one year in that the 67 has the chrome insert into the rubber weather-strip itself? I just picked up the car and I'm not sure what I'm looking for for the weather stripping for the front and rear glass. pics of 67 vs 68...

-can cut out any sheetmetal parts needed from body before taking it to scrap (1 week , 2 at most). -may have other parts available from friend

What rear is this?

i have a rusty 66 valiant, and found a near perfect 70 dart body, but the dart has no running gear, front or rear suspension, and no steering column. My question is how much can I swap over from the 66? I think I'm good on everything (k-member rotor to rotor, rearend), but the column, will it...

Stock width BBP axles for a-body

35 spline Center chunk with posi and 3.55-4.56 gears Thanks

Are the 9 in drum spindles strong enough to handle a 360 with the Wilwood 140-11022 disc kit or should I find a set of 10"drum spindles? thanks

$450 -like new -have new quick fuel bowls to go with it -was on truck I bought to pull heads from, way to big for the 318 that was in it, so it was never setup or ran https://onedrive.live.com/redir?resid=610FAEB7C76794BD!428&authkey=!ADDkL_vW_Kbx6S0&ithint=folder%2c

$1000 -Dana 60 I think, ring gear has (1120 70 dana 36144 a3r82 41 8) on it though. does the 1120 70 mean its a 70 or is that the date -spool and 5.13 gears -about 49" wheel mount to wheel -need spring perches -needs drums pics below...

$1000 complete (WILL SPLIT IF ALL PAYED FOR BEFORE SHIPPING) -8 3/4 a body housing -741 case 3.55 cone sure grip -all new seals and brakes to be put back together -SBP axles pics below https://onedrive.live.com/redir?resid=610FAEB7C76794BD!445&authkey=!APM6ArLqZAWkvAQ&ithint=folder%2c

what rear is this exactly? gearset says 1120 70 dana 36144 a3r82 41 8 what i get from that is dana 70, spool, 5.13 gear, but what is the housing dana 60 or 70 also what drum do i use pics in link below thanks...

$600 plus shipping M1 2 brl P4510016 partial install kit $125 plus shipping comp cam 20-225-4 with lifters maybe 5-10k miles $100 plus shipping chrome mopar la valve covers $125 plus shipping B&M starshifer with cable , only have chevy brackets $400 plus shipping predator carb with 3 cams...

working on the 360 magnum motor for my valiant and trying to figure which way to go for now. I'm leaning towards #1 as i could swaps the heads out easier later on and it would only help current motor mods - comp cams .506/.506 - 1.6rr rockers and .600 springs - twin 52 throttle body - 4...

1966 225 auto Kodak, TN 37764 $1500 See craigslist link for specs https://knoxville.craigslist.org/cto/4439383900.html thanks

Anyone have any luck getting any info from them? They have a cast 402 stroker piston in there overstock $179, but don't have a part number or any info. Tried calling twice and all I can get is, "there flattops".

any ideas on how much oil they need. looking at building a remote oil system for the shafts and dont know how much flow they need

do they actually fit the early a's, jegs list yes, but not summit http://www.jegs.com/i/Hooker/520/5116-1/10002/-1 http://www.summitracing.com/parts/hok-5116-1hkr/applications 66 valiant specifically

Where can I get pushrods for this setup? And are the rockers the same for the race and econo heads, just the shafts are diff. Thanks

Is there a problem using a retrofit roller cam in a magnum block?

I know b-body spindles will fit on the early a's, but are they the same width or will it make the track width wider? anyone know anything about 75 roadrunners, are they disc brakes and what lug pattern?

will 28" axles fit in a a-body rear housing or will they need to be cut down, and does anyone know spline length on the stock axles if I need to cut the ones I found down to stock a-body length 8 3/4" axle shaft lengths measured from the tip of the splined end to the outside of the flange:A...