Search results for query: *

  1. bradr440

    New heads on the way for my Dart, few changes

    Don, I'm as excited about your heads as you are about me finally getting my car running. LOL. This should be a really fun year! Brad
  2. bradr440

    Holley Stuff

    I have the intake and it is very nice. A Holley Sniper 92 mm LS cable operated throttle body bolts right up. That's a big plus. And the intake comes with really nice fuel rails for $585. Putting the heads and intake on this weekend. I've heard mixed reviews on the valve covers, but a lot...
  3. bradr440

    [WANTED] 68 Dart console or manual trans steering column ring

    Converting my car from column shift to floor shift and would like to get rid of the shifter handle and gear indicator thingy. Let me know if you have one that will fit. I have PayPal. Thanks!
  4. bradr440

    73 Scamp 5.7 Swap

    Hey 408 Swinger, I just took this picture. Regarding the cover of the steering hitting the valve cover, do you think the area I marked with a silver sharpie will get the job done? From your photo, it looks like you cut the whole thing off? Thanks for the help!
  5. bradr440

    [SOLD] Complete fresh 318

    Freshly rebuilt 318, carb to pan. I can't remember the year of the block, but its the LA engine with a hydraulic roller that was only made a few years.... around 1990. Right before the magnums. It has a remote oil filter system and MSD ignition. New Mancini distributor with an FBO limiter...
  6. bradr440

    [SOLD] 408 short block

    I don't have a cam. I was waiting for the heads to come available (Trick Flows) that I want, and then I planned to have a smallish solid roller spec'd for it.
  7. bradr440

    2018 Small Block Race...... join the Fun

    I can't open the spreadsheet right now, but I think I was supposed to run a low 12. 318 with KB pistons, J heads, headers, air gap, 750dp, hydraulic roller cam, 3500 stall, 3.73 gear. That was the first time at the track. I've not tuned it at all, so I'm sure it has more in it. It was hot as...
  8. bradr440

    2018 Small Block Race...... join the Fun

    I'm on the right. 13.68
  9. bradr440

    2018 Small Block Race...... join the Fun

    I made a pass back in June. I think I can tune some much better ETs out of it. Its heavy too. Almost 3500 with me in it.
  10. bradr440

    [SOLD] 408 short block

    360 block aligned honed mains with ARP studs, bored .030 over new cam bearings and freeze plugs. Mopar 4340 forged 4" stroke crank, Eagle H beams with ARP 2000 bolts, and Icon forged pistons (IC745.030). It is balanced. Also have a new Edelbrock Victor intake, SFI balancer and flex plate that...
  11. bradr440

    [SOLD] Small Block 408

    408 stroker short block 360 block aligned hone mains with ARP studs bored .030 over new cam bearings and freeze plugs. Mopar 4340 steel 4" stroke crank, Eagle H beams with ARP 2000 bolts, and Icon forged pistons. Also have new Edelbrock Victor intake, PRW steel SFI balancer and flex plate that...
  12. bradr440

    Engine color Red or blue????

    I vote black. I think it will look better with the body color.
  13. bradr440

    Riddler pics

    I love the aluminum slots... on top of everything else awesome about it.
  14. bradr440

    Street car on the track - newbie questions

    I've heard to drive around the water. The tread can carry water up to the starting line and you'll spin even worse. I always drop the pressure.
  15. bradr440

    904 6 bolt crank flexplate internal balance

    I have the B&M 10230. 340 crank 6 bolt crank, internal balance, 904 transmission. I have no idea why Jegs, Summit, etc... only list it for a 727. Its been on the car for awhile, but if I remember correctly, the inner little holes match up to the 904 converter.
  16. bradr440

    Add 273's, 340's & 360's to the "318 Race" ?

    Count me in. I wanted to participate last year, but it wasn't finished. All done now and just waiting for spring. It's a 318. Based on the pdf in post 152, I need to run a 12.50. That's about exactly where I think it will be after any bugs are worked out. So I think you did a really good...
  17. bradr440

    Holley valve covers, grommets?

    I have a set of Holley valve covers similar to the ones in the picture. Anyone else run these? Where did you get grommets and what breathers are you running? I have a oil filler cap in one hole, so that leaves me with two holes 1 1/2 in diameter. Thanks!
  18. bradr440

    Out with the old, in with the new

    Rick is like a little devil on my shoulder. I'm already accumulating parts for a 408. This hobby is a sickness. :rofl:
  19. bradr440

    Out with the old, in with the new

    2018 is shaping up to be a fun year! Mine is back together and I was hot lapping around the neighborhood. Congrats on the stroker Don. Rick is prodding me into building one. LOL
  20. bradr440

    [Found!] 68 Dart tail light bulb sockets

    Thanks guys. Another member has already contacted me, so I think I'm good.
  21. bradr440

    [Found!] 68 Dart tail light bulb sockets

    Hello, I especially need 1, but will buy all 4 tail light bulb sockets for a 1968 Dart. I'm not having luck with aftermarket parts, so I want the original pieces out of car. Thanks for the help!
  22. bradr440

    How I Made My Engine Dolly

    FANTASTIC! Thanks
  23. bradr440

    How I Made My Engine Dolly

    Could someone please measure the distance between the two 2 x 10s for those who don't have an oil pan handy? thanks!
  24. bradr440

    Most hated question about your car?

    Beat me to it.
  25. bradr440

    Most hated question about your car?

    Thanks! I had a 65 Dodge Coronet 440 that had its original slant 6 when I bought it. That confused people. I did put a 440 in it shortly after buying it, so I guess I had a numbers matching car....
  26. bradr440

    Most hated question about your car?

    Are you saving up to buy the back wheels? See attached picture. It doesn't make me mad, but it's pretty silly.
  27. bradr440

    Anyone own a 69 Dart GT in B5 blue?

    I have a 68 in medium blue poly. I believe for 68 it's the same as B5. I think the color is about the same. Not a GT.
  28. bradr440

    EQ's,Cam, and Rocker recommends.

    Oh I like the sound of your build. I can't wait to hear more. Please keep us posted.
  29. bradr440

    Magnum heads on LA block

    Ok Thanks guys. I'm going to call comp cams now. I think this is starting to make more sense than putting milled 360 heads on a 318.
  30. bradr440

    Magnum heads on LA block

    Sorry if this has been discussed to death but I can't find the answer. I see Hughes says you have to clearance the pushrod tunnels to put Iron Rams on an LA block, so do you have to do this with factory Magnum heads on an LA block? This is an LA block with a hydraulic flat tappet cam. Thanks
Back
Top