Search results for query: *

Can anyone tell me the speaker sizes, front and rear, that came stock on the 69 Dart. I don't want to be cutting and hacking to install new ones. I would like some bolt in replacements and I want ones that will sound good with my new Retro sound radio,, Thanks

Does anyone know the Mopar part number for the torsion bar "seal" that would go on a 69 Dart 340. Dealer says he can order it if I Have the number...

How long are the exhaust tips on a 60 340 Swinger, looking for one that will take 2 1/2 exhaust and still look the same as original..

I have a 69 dart with a 340 4 speed transmission. When I bought it, the clutch was releasing when the pedal was 1/2" off the floor. It is hard to get in gear unless I really push the pedal hard on the floor. I wanted it to release closer to the top and bought all new pieces for the linkage as I...

What is the easiest way to move a small block in a 69 Dart about 1/4 inch to the passenger side to get one of the TTI header pipes off the drivers side torsion bar. Don't want to pull the motor.. Thanks..

Just put disc brakes and TTI headers on my 60 340. Had to put on a proportioning valve and when the headers went on,one pipe is almost touching the proportioning valve. Question is how close to the valve can the exhaust be without affecting the brakes..

Just put disc brakes and TTI headers on my 60 340. Had to put on a proportioning valve and when the headers went on,one pipe is almost touching the proportioning valve. Question is how close to the valve can the exhaust be without affecting the brakes...

My 69 340 swinger has 1 horn that looks like it came of a Ford or Chev. The guy I bought it from said he couldn't find the 2 that came on it so he just put something that worked to sell it. I would like to know if the factory ones have a correct number on them for each year or is it anything goes ?

Looking for a pair of fender mounted turn signals, the bullet style, for a 69 Dart. If you have a pair or know someone who does and might be willing to sell them, please contact me. Thanks.

Thinking about putting electric cut outs on my 69 Dart 340 with TTI headers, any pros or cons and best installation set up, (location). Thanks..

Looking for a pair of fender mounted turn signals, the bullet style, for a 69 Dart. If you have a pair or know someone who does and might be willing to sell them, please contact me. Thanks.

May not be on the correct thread but would like to know what separates the back seat and the trunk. Is it a hard board fiber board or or jute or what. What was the original piece ?

Trying to find the correct jack for my 69 dart swinger 340. Does the original jack post have a hollow rectangular shape or is it shaped like a "T" fenced post. Very confusing !!

Looking for a set (not new) for my 69 Dart. If you have a pair or know someone who does, let me know. Am located in Florida. Thanks

Am looking for a pair for a 69 Dart. Should be complete and in good condition. Am in Florida.

Couple of questions re the TTI (and stock) Z bar. There is a thin spring that fits in the 2 holes on the frame end of the Z bar and I believe it keeps the bar from moving in and out too much. Question---do the 2 spring ends fit into the Z bar and go below the bushings or in the groove in the...

I have a 69 dart 340 and need to replace the oil pan as it is rotting. It is a stick car with a scattershield and block saver plate (came on it when I bought it). Question is can I get the pan off without pulling the motor. Center link is out, can the pan drop straight down or does it have to be...

Am looking to install new fender mount signals and can't remember on my 69 Dart in 69 if the signals were flat mount or had a curve. Any one know which ones were original. Mounting dimensions would also help...

Have a Dart with red paint. I believe it is called R4. Does anyone know if spray cans are available as I just want to blend in some weathered spots inside the wheel wells. Any help is appreciated.

Am converting the front drums on my 69 Dart 340 to discs and was trying to decide what color to paint the items that need to be painted. Was thinking gun metal grey but am open to suggestions. Don't want them to rust..

Is there any specific size or type of pickle fork to use to remove the ball joints and tie rod ends on my 69 340 dart

Having trouble with adjustment. Just bought a 340 Swinger 4 speed car. To put in first or change gears, pedal has to be on the floor. When releasing clutch, it engages within 2-3 inches. Also, when clutch is in, the release arm is touching the back of opening in the scattershield. Would like to...

Converting my 69 340 Swinger front drum's to disc's. Was told Pirate Jack has a good set up ($520). Anyone used his stuff?

I have a 69 340 4 speed Dart that is all factory except for a scattershield. Are there any manufacturers that make a header kit that fits without having to disassemble the car any time I want to take them off or put them on.

I have a hurst super shifter in my 340 Swinger. It is what they called a Push Down Shifter. Mine is not working very well and I was wondering if anyone has ever had one and and had to rebuild it . This one is hard to get into and out of reverse. Is there a rebuild kit available, Any information...

Looking for an original steering wheel from a 69 dart swinger. Not the plain jane one, the one with the flat aluminum spokes with 2 slots. An option in 69.

Is there any one who can tell me the correct Hurst number on the factory shifter that came on a 60 340 Swinger. Just got the car and want to put an original shifter back in it. Don't like this "push down" shifter that came with it. Also would any one know where to look for the proper part #'s or...

I have P245-60R14 on the rear of my 69 swinger, what tire will fit in the spare tire cavity in the trunk . I have a 5 1/2" rally wheel from a 70 to mount it on. A P205-70R14 fits in OK but it is about 2 1/2" to wide which causes a big bump in the trunk when covered. I need to keep the wheel...

I am trying to hunt down my 340 that I bought new in 1969. I need to speak to some one who "is" or considers himself to be an expert on these cars as I have many questions I need answers to. Also, my car was bought in Scarborough Ontario Canada so if there are any local Ontario members, I would...