Search results for query: *

How do I mark my ad as sold...?

I have a box of parts for mostly a 65 barracuda.. The seat trim is from a 67 fury/vip front bench seat and the outside mirror is from a 69 coronet. The headlight trim rings are a mystery to me, but look like maybe an early early valiant? $100 for all or make offer on seperate pieces..Plus...

Would a 66 273 engine use the same harmonic balancer as a 69 318?

I have a 1965 Barracuda for sale. In good shape. Newer paint with a few bubbles around the rear wheels. Good interior but needs a headliner. Rebuilt engine, but having carb issues.New 4 bbl edelbrock carb. Like I said..having carb issues.. Cragar wheels.. 14" small bolt pattern. 318 engine and...

Where can i get new rocker arm adjusters for my 273 rocker arms..The ball ends on the adjusters are worn and pitted.

My freshly rebuilt 318 started a lifter tick at hihgway speeds that goes away when at city street cruising speed. It takes about 30 to 40 seconds for the ticking to subside after the rpms drop.. I checked oil pressure yesterday and was reading about 25 at idle and 35-40 peak when at high rpm...

Do all sbp wheels use 7/16" studs?

As the title of the ad says...I need a good used y-pipe or a new one for less than the $400 plus they get for them at the store... Anybody?? I just need that pipe..I have the others needed for the factory exhaust. Dan

I wondered....My clutch is the factory sized clutch and now that my motor is all strong and stuff, it sure does slip a lot, especially when try to do a burnout.... So in order to get a stronger clutch, do I need to change the bellhousing and what would be involved as far as z-bar and linkage...

I was recently given some 13" steel sbp wheels with really nice tires on them. I was thinking I could use them as burnout tires this summer...Will the 13" wheels fit with my 10" drum brakes. I currently have 14" cragars and would replace the rears with the 13" wheels for the burnouts I plan on...

I am looking for a holder to hold the pumpkin out of my 8 3/4 rear end while I set up the new 3.55 gears...Something like what a shop would use..I just dont know where to find one. Something I can stick in my engine stand and rotate the diff when necessary. All I have now is a workbench to set...

This is a long shot, but I am looking for front sway bar end links for a 84 ramcharger 2wd. The part number is 3637319..Can't find an aftermarket interchange. It sort of clamps to the bar and bolts to the frame.

Gonna go look at this tonight.... six cylinder, 8 3/4 rear, 3 speed column shift, camaro seats? runs, but seller says needs shift linkage adjusted and brakes...

not mine, but I've seen it in person at the nats the last couple of years. Super sweet ride. This was my favorite early a-body at the show. http://cincinnati.craigslist.org/cto/3334005216.html

I recently purchased a door and lock set from one of the aftermarket vendors for a 66 barracuda hoping it would fit one of my 65's. Well it doesn't. I am hoping to find a good set of door locks and hopefully the matching ignition from someone here. Must have key!!!! Anyone??? Dan BTW..I have...

So my problem now that I have a good strong 318+.40 with 10.5 to 1 compression, is that my small clutch can't hold and slips when putting the gas pedal on the fast setting...I have the 10" clutch Brewers sells, but it's just not cuttin it...Would a swap in rear gears help..I am running a 2.76...

So why are the new bushings I bought for the rear shackles so hard to get in? Do I need to use a hone t o clean out the holes or is there more than 1 size?

Do I need some kind of spring eye extensions to use ss springs on a 65 barracuda? Are the ss springs shorter in length than the regular stock springs? I got a line on a used set of the ss springs and need to know if I need additional parts to install them. My car has an 8 3/4 rear end in it...

I am looking for a good used set of sbp front 10" hubs and drums with the 7/16 studs in place.... I ruined mine trying to replace the studs. These are going on my 65 barracuda. Anybody have a set from a disc swap the've done. As it stands now...unless I get this resolved soon..No Mopar...

Would any a-body steering box fit any a-body or do the early a-bodies use something different than the post 1967 and up a-bodies used? I would like to replace my worn out steering in my 65 barracuda with a rebuilt box. It's a manual steer car. I dont want to go to power steering, just a new...

I found an ad for this rear molding for an early barracuda. I have only seen this once before and it was on a 65 barracuda.Honestly I thought it was a rocker molding cut down to fit between the taillights. I am guessing it was an optional trim piece?

When I find myself sitting at a long traffic light with the car running, the idle gradually slows down and after a long enough period of time the care will die. Crank it over, and it starts and will do the same thing. It takes about 2 minutes to gradually slow down enough to stall. If I just...

here are a few I saw at MATS... The bulldog was just cool.

Actually I heard a pop when I was accellerating away from a stop sign and then it felt like the rear end was slipping. I would give it gas and hear a low moaning sound from the rear and the car sits still even though in gear. It is a 4 speed with a 8 3/4 clutch type sure grip. Is there something...

We are going to the Mopars at the strip show in vegas next weekend. Anyone have any dos or donts suggestions for me. Not taking my car, just spectating..Anything a must see while I am there? Anyone else going? Dan

I need to get new axle bearings for my 8 3/4. What is the feel for bearing selection. Go with the roller(stock) bearings or use the "green" non-adjustable bearings. I am leaning towards the green bearings. I will not be racing this car, just the occasional burn out here and there.

So I just installed an 8 3/4 in my 65 barracuda. I bought it from a guy who had it in a 70 something dart. The axles were aftermarket, with the small bolt pattern. Are the axles shafts supposed to be the same length as each other or is one bigger than the other? I found adjusters on both left...

Who sells a stock y pipe for the 65 barracuda with the 273 4bbl? I want to go with a stock exhaust on my car instead of duals dumping in front of rear axle

I am installing a new gas tank in my 65 barracuda. I had to cut the old j-bolt to get the strap off. I can't find a new j-bolt anywhere on ebay for my car. They all look different than mine. Mine is actually bent in the shape of a hook, not the flattened out end that all the ones I have seen...

I have 2) 14 x 7 Vintage Cragar SS wheels for sale. They have decent but not perfect chrome. They are called reverse offset wheels. I called them deep dish back in the day. They have the Mopar 5 x 4 small bolt pattern. I don't want them anymore.They are too wide for my car. They have a...