Search results for query: *

Hey Krazykuda - Thank you for the information - I'll check them out ! Thanks again !

Hi Guys ! I have a 68 Dart Gt with the factory 318, automatic transmission and factory a/c. It's been restored now for about 5 years. I have had to put two alternators on this car - they are NAPA reman alternators - and now it need another as it is not putting out the correct amps - it's under...

Hey Guys Well - it's been a long road but the Dart is Finally running again ............ Thank you for all the suggestions and help. I tried all the suggestions and after replacing the carburetor, coil & ballast resister and multiple checks on fuel, timing and a host of other idea's it turned...

Hey Dartswinger70 - I have not rebuilt this engine - the only thing I had to do was take the intake off and have it cleaned because it was plugged with carbon - I have not replace anything internal - checked compression on each cylinder and right at 125 to 150 lbs of pressure and I had a new...

Thank You Everyone ! Great advice and a lot of things to try ...... I'll get started this week as my damn job is keeping me from doing any type of repairs right now ! errrrrrrrrrrr thanks again ! Mike

Ok - I will do that - thanks furrystump ! It's been a long time since I have rebuilt a carb - just helped a friend rebuild his carb on his 49 dodge - was really easy so I will try that first ! thank you so much ! Mike

Thanks Guys - I'll try all your suggestions - it is a stock engine - didn't have to rebuild it - like I said - everything bolt on this engine is new - did check for vacuum leak and had a loose hose so put a clamp on it but made no difference - was hoping that was the problem ..... Thanks again...

Hey Guys, I have a few questions and hopefully someone has run into this problem - last week I started my dart and it was running excellently. I pulled it out of the garage and let it sit running to warm it up. As it was running all of a sudden it started to stumble really bad. I thought it...

Thank You KitCarlson- thanks for explaining - I guess I will start by tracing wires an checking grounds to make sure those aren't a factor thanks again! Mike

Hey KitCarlson - thank you - the engine was warm because I started the car to warm up because I needed to turn the car around in the garage - plus it had not been started in about a month since I was upholstering the seats and repair the dash paint at the bottom of the cluster where I had messed...

Hey Guys, just finished putting a new temp gauge in the cluster of my 68 Dart GT - old one didn't work but once and then never again - bought the new gauge from Classic Industries - everything hooked up and cluster back in dash. When I turn on the key - the temp gauge needle goes all the way...

yeah - that's what I was thinking also - I guess I'll have to lay off the caffeine for a couple of days first !

That's a great looking car! LOVE the striping !

Hey Everyone, Has anyone repainted the black "Dodge" lettering on the trunk finish panel? Is there any type of stencil that matches the lettering that I can use to mask off the lettering so I can repaint the black?

thank you very much !!!!! I thought they would be but never hurts to check ! thanks again v8fish !

Hi Everyone, Ready to order Center Caps for my 14" SBP Rallye Rims. I bought these rims from a local guy who had them on his 69 Barracuda. My question is this: Are all the Cone Style Rallye Center Caps (SBP) the same size no matter what year caps I buy just as long as they are SBP? - I have a...

Hey Guys & especially Yellow Rose - I am sorry that I pissed you off as that wasn't my intention - I let my anger get the best of me over the problems this car has given me - I know better than that - I know we are all here to seek advice and help each other out - my anger made me forget that -...

Good

I have a timing light and I DO know how to use it - I also DO know about carb functioning and the ignition system - duh - this is not my "first time at the rodeo" buddy............ the problem I am dealing with is I have no history on this engine - I have not rebuilt it - it's had head work done...

Hey gtsdude - The rotor does aim at #1 cylinder so I know that is correct - I was going by what a friend told me - on my distributor cap there is a "1" made into the cap itself but that "1" is next to the #7 port in the pic posted above......... and that's why the car won't fire now - I'm...

Thanks 73Swinger18 ! I will do that - I did hear some pinging last night when I stomped down on it at one point ! thank you very much ! Mike

Hey Swampmike - I never took off the harmonic balancer or messed with it in any way - I did not rebuild this engine - it has had head work but not by me ........... I can kill the engine just by turning the distributor in either direction far enough - I simply kept it in the "middle" of those...

Hey Guys I had to replace the water pump and the intake gaskets on my 318 V8. The intake was plug with carbon completely - had that cleaned - started car last night and she'll burn the tires off in an instant ! My question is this: I put the timing light on it and the line in the harmonic...

Thanks abodyjoe !

Thank you very much guys ! I think I just solved my problem with all of your help- I'll just go with a wider tire and not mess with the rim width ! thanks again ! Mike

Hey Everyone Thanks for all the info you have given me but I am still a little confused ..........What I am trying to accomplish is to have a little wider tire on the rear of my 68 dart gt.......... right now I have P205/70R14 tires on a set of Rally 14" SBP rims which I assume have the factory...

Hey Everyone Thanks for all the info you have given me but I am still a little confused ..........What I am trying to accomplish is to have a little wider tire on the rear of my 68 dart gt.......... right now I have P205/70R14 tires on a set of Rally 14" SBP rims which I assume have the factory...

Thanks for the info abodyjoe ! Mike

Hey CUDA69 thank you for the info ! I'll take a look at them - one thing - I should be able to run a 60 series tire in the 7 inch width, correct?

Hey Everyone, Has anyone ever used a company named " themorpardude.com" to get the rally rims ? I am looking at the 14" rally SBP in a 6" width - I would like to have a slightly wider rim on the rear of my dart providing it doesn't scrape either the leaf springs or the inner wheel opening...