Search results for query: *

Looking for Tti long tube headers 1 3/4 primary tubes. Part # TTi 383440-134C4 Shipping to NC 27526 Thanks, George

My friend and hot rod mechanic for the last30 years freshened up his backup motor and decided to put it on the dyno. 4.35 bore x 4.25 stroke 185 psi cyl pressure ported edelbrock rpm heads trick flow intake holley 850dp Trick Flow track heat hyd roller Intake Duration at 050 inch Lift: 243...

Looking for a good used front sway bar for a 72 Duster. My car did not come with a sway bar. Will consider an aftermarket unit.Shipped to NC 27526. Thanks, George

2008 Pontiac Grand Prix GXP 5.3 V8 front wheel drive 102k miles Leather Heated front seats Sunroof Tap shift Everything works as it should. Aftermarket air intake ZZP down pipe with hi flow cat. Spark plugs and valve cover gaskets replaced. New tires and brake pads all around. Small leak around...

Looking for a good used ring and pinion for a 72 8.25 rear end. Looking for a 3.21 ratio and would also consider a 2.94.

Here is a friend's dart convertible. Just a few photos since it happened to be at my mechanics house when I dropped my car off.

Looking for a good functioning used 8.25 limited slip unit. If it has 3.21 or maybe 3.55 gears all the better. Shipped to 27526 NC. Thanks, George

Stock 400 2 bbl converting to 4bbl. All my experience is 440 so what say you? Stock 8.2-1 400 in a C body with highway gears. I know factory Tquad intakes are good but not putting something that heavy back on if for no other reason I am old and have a bad back.

I have a 72 Duster, what other years and makes interchange if any? Thanks, George

Just a couple of pics with the new springs and caltracs installed.

Looking for a good used front sway bar for a 72 Duster. My car did not come with a sway bar. Will consider an aftermarket unit.Shipped to NC 27526. Thanks, George

72 Duster with a 440. Stock rear springs are soft and original. It is a street(70% street 30% track) car but being able to plant the power to the ground is important.Like to keep ride height where it is.Maybe a little lower would be ok but not any higher. I can add/replace leafs with some of my...

For those of you running a Borgeson ps box with a big block,How much header clearance do you gain? Anyone able to run larger under chassis headers with this box? I may be too thick headed to realize I can't do a 440 and 1 7/8 or 2 inch headers without going to manual steering or fenderwell headers .

Any recommendation for a complete battery relocation kit for my 72 Duster? Or separate parts kits for better stuff? Probably do a master shutoff switch mounted in the trunk. Don't have to pass tech anywhere just getting weight to the rear.

So just got the heads off the 440 in my duster and just as I suspected the pistons are cast and .124 in the hole at .030. I was going to swap the 452 heads for my cnc 440 source heads and slide in the comp xe 274 cam I have (came out of the same motor the heads came off of). Seems like about...

Finally got a big block A body that I have wanted for 30+ years. Car has been sitting largely for 10 + years. Big block conversion a good 20 years old.

Looking for headers for a 440 in an A body (72Duster) with POWER STEERING. Have Schumacher Try Y headers now. Would love to find 1 7/8 or 2 inch primaries that work with factory power steering. Semi fenderwell ok. Does anything exist?

Looking for some old drag lites in a 15x6 with large bolt pattern. Open to other widths.These will be for the front of a 72 Duster.I have two 8" for the rear but will consider sets of old wheels provided the backspacing is functional for the car.Worst I can say is no. This is a day two kind of...

Has anyone used any of the Pypes A body exhaust? Specifically the hybrid 3"/2.5" system. Any fitment or quality control issues? 1967-1974 Mopar A-Body Hybrid 3 Inch to 2.5 Inch Crossmember Back Exhaust System With X-Pipe 409 Stainless | Pypes Performance Exhaust

So who is still around making fiberglass hoods for a 72 Duster? Quality ? I am thinking a glass hood with a six pak scoop for more clerance since it is big block swapped.

Looking an orange 440 super commando pie pan. Used or new. Shipped to 27526. Worn with patina/blemishes ok as well as long as it is legible. Thanks, George

Need a good used (or new) gas cap for a 1972 Duster. Will need to be shipped to 27526 please.

What headers work with power steering? 72 Duster with a 440. TTi says no power steering with their BB headers. Has Tri-Y now and was hoping to go bigger when I do heads and cam.

Low deck (best I can tell) Holley street dominator intake with all badging and part numbers removed. Bought this way years ago and don't need it. It is an inch narrower at the intake flanges than a 440 intake. $200 shipped East of the Mississippi and $225 west of. Postal money order or personal...

Yesterday being Dec 7 (Pearl Harbor) I was a little surprised on my way home.I stopped at Dollar General for a few things and my total was 19.41. I was going to comment on that to the cashier but the metrosexual 20 something probably wouldn't have known what I was talking about. Useless info I...

Looking for an Indy 440-2D intake with the standard port opening.PM here. Thanks, George

Haven't done anything major on a motor in 20 years.What is the go to other than the old Felpro 1009 head gaskets for an aluminum headed 440? Swapping heads and cam from stock edelbrock heads to cnc ported 440 source heads. I see 440 source's is .051 thick and the fel pro is thinner (preferred)...

Holley #3310-2 with a milled choke horn.750 cfm vacuum secondary.Needs a kit I'm sure.Bought as is many years ago and has been sitting in a cabinet in my laundry room.It appears the bottom of the throttle linkage and the vacuum rod are slightly bent. $80 shipped to the lower 48 or welcome to...