Search results for query: *

I have a OEM Mopar Performance Air cleaner with out breather hook up, its in pretty good shape iv'e owned it close to 30 years. I do not have the original base any more but have 2 that can possibly be used. one base would work perfectly but its for a 67 and older Carter AFB with the smaller...

I Have 2 old school camshafts that id like to get specs on if possible One is a Norris 356 DMS with a 7 on the left and a D on the right Other is a Crane on the snout is SS-320-NC and rear 975 uc can any one give specs and if solid lifter or hyd. thanks in advance

I bought these brakes on a project car that sat for many years and never seen road use nor have had any fluid, I believe part these are # ,140-11020 or similar, they are dual bolt pattern 4.0"or 4.5" which i don't believe is offered any more ,the measure rotor thickness .806 , x 10.750 diameter...

I have a set of Never Run TRW .060 true 10.5 Pistons that have been shelved for many decades. they Are approved for NHRA as a six pack piston. $350 Shipped location Southern California

I have a set of Indy cylinder heads from a project car i bought so I know nothing about them other then no modifications or damage from blow ups I dis-assembled them, de-greased , wire wheeled and was going to lapp the valves in with lapping compound, but i believe they might need to have the...

Brand new set of Hooker 1 3/4 primary tube with 3" collectors, part # 5204 non coated for 1968 to 1972 A body chassis, these are not the average universal headers. These are for real high performance applications. for use with with no power steering , spark plugs are a breeze to get to and best...

Up for Sale Willwood dual bolt patern (either 4.0" or 4.5") disc brakes complete Set from a Charger project i purchased, Id rather use stock parts, Installed but Never ran Rotors are 10 3/4" and rotor thickness is .806 ,included are Mopar B body spindles that don't come with Willwood kit...

This is a power steering adapter to convert from power steering to manunal with out dis assembling the column to change the shaft. I do not know if its a manufactured part or not . It turns true and it works. located southern California $50 shipped

This is a flaming river manual steering box from a Mopar B body i purchased and have no need for. Its not aluminum i think, it turns 4 1/4 turns lock to lock.. This makes plug changes a breeze with a big block do to its design. I do have pre 73 pitman arm i will include. located southern...

Reproduction Hemi type master cylinder adapter for 4 hole master. great for hemi A body swap or Big block with fenderwell headers. I believe this is no longer produced. located southern California $70 shipped

Any ideas of camshaft manufacture and spec? its big block 3 bolt solid lifter rough measurement of .530 lift ..it scribed 285-295 and 108 as well as the other visable numbers hope the pics are good enough, thanks in advance

Moroso Aluminum transmission pan and shield as well as new Mopar Performance Pick-up the pan was installed on a car that sat neglected that i bought and have no use, no scrapes or dings , I have all attaching bolts as well as the flywheel shield could use good cleaning Mororso pan lists $325...

CSR Brand Big Block Trans Shield , No blow ups or any other Damage , is out of Certification for competition use. but it can be Recertified Lists for $625 plus tax at Jegs and Summit $300 shipped its located in Southern Ca

I have a gear vendors overdrive for 727 transmission, it was installed in a Dodge Charger ,but will fit any chassis. Project I bought that was never finished. Even though it was connected to the transmission and installed in the car it's never been Used I have all paperwork, module, wiring etc...

Hello, I'm looking for 70-72 dart hood latch and lever assembly. I will take all or separate parts. Thank you Fabo Please pm with price and pics if possible

Good shape, no rust can fit 72 also with adding a tab located in Southern California 93536 $150 rather seller local and not ship at this time please pm

Set of NEW Hooker 5204 headers with gaskets bolts and collectors For 68 to 72 Chassis ,for no power steering, starter changes are a breeze $500 prefer to local pick up at this time located in so California 93536, please PM

Hi looking for drivers side (left) A body disc brake spindle. Please pm if you have on I already have the right side but will purchase both if need be.. Thanks in advance

Hi looking for drivers side (left) A body disc brake spindle. Please pm if you have on I already have the right side. Thanks in advance

Milodon 7 quart oil pan and pick up, for Mopar 360 car, very good shape. No bottom outs $175 pus actual shipping charges, located so cal please pm

Brand new set of Hooker 1 3/4 primary tube with 3" collectors, part # 5204 non coated for 1968 to 1972 A body chassis, these are not the average universal headers. These are for real high performance applications. for use with with no power steering , spark plugs are a breeze to get to and best...

Ok what I have is a 1966 Dodge Coronet 8 3/4 with the spring perches moved in To 43" The overall width is only a little 2" over a factory A body 8 3 /4 differential Benefits are big bolt pattern and 1/2 the cost of a A body 8 3/4 This differential is complete and ready to install with all...

Up for sale 71 Demon , was a factory 6 cylinder car with column automatic , less engine , but i do have trans and driveshaft, has drum brakes and 7 1/4 differential factory A/C car. Factory white with orange bucket seat interior, have fender tag and even buildsheet This car does need a total...

Wanted a decent shape , needing repaint ok, Dart Demon drivers side headlight bezel Please pm Thanks forabodies

Hardened shaft, like new only about 6 hours run time, pictures reflect condition. located so cal. 93536 please pm $100 shipped

Camshaft is 23-713-9 Cam Style: Hydraulic roller tappet Basic Operating RPM Range: 2,800-6,400 Intake Duration at 050 inch Lift: 242 Exhaust Duration at 050 inch Lift: 248 Duration at 050 inch Lift: 242 int./248 exh. Advertised Intake Duration: 292 Advertised Exhaust Duration: 300...

New Never used installed on car !!! Rims were almost 2 months to ship, made to order Set of 15 x 3 1/2" with 1 1/4 " backspacing front Weld Racing part # 88-504200 Weld Pro Drag Alumastar 2.0 Set of 15 x 9" with 5 " backspacing rear Weld Racing part # 88-509210 Weld Pro Drag Alumastar 2.0 front...

Up for sale as a complete package: Competition cams Hydraulic Roller Camshaft, roller lifters, bronze gear gear drive, double roller timing chain with cam button. Camshaft is 23-713-9 Cam Style: Hydraulic roller tappet Basic Operating RPM Range: 2,800-6,400 Intake Duration at 050 inch...

1972 440 block with Hughes HUG 440505-2D 4.250 stroker kit with 8 bolt crank flange, also has SFI approved flexplate, block deburred, bored .040, decked and line honed with Hughes race balance. Arp main studs windage tray and 8 quart pan. No camshaft.only about 6 hours run time and 70 miles...

What do you guys think of this profile for a small block Mopar and why?? intake 307(adv dur) 254 (.050) .171 (.200) .365(lobe lift) .548 (1.5) exhaust 317 264 .179 .341 .512