Search results for query: *

  • Users: Buford19
  • Content: Threads
  • Order by date
  1. Buford19

    Hood painted black

    Painted my hood hot rod black on my 67 barracuda. Just installed the hood and I have scratches appearing already very easily. What type of paint are people using when blacking out there hoods. Looking for a flat black paint that durable, if that’s possible .
  2. Buford19

    67-69 Barracuda door assembly

    Looking for diagrams, pictures, or any information to help me reassemble the doors on my barracuda. Need to know where each part goes, and in which order they go in. Any information would be appreciated. Thanks
  3. Buford19

    2013 wiper motor

    Did a wiper motor relocation on my barracuda. The wiper motor is out of a 2013 Dodge Dart. This motor has a plug with 4 wires going to it, gr/br, bl, br, and br/wh. Can’ t find a wiring diagram for this motor. Would anyone have any ideas which each wire is for, assuming black is ground?
  4. Buford19

    Lower rear seat, 67 fb barracuda

    On the lower back seat, there is two metal tabs with a bolt hole in them. Where do these attach to? Don’t see bolt holes in the floor, but my floor is covered with sound proofing.
  5. Buford19

    67 fb interior lights

    Is there a overhead interior light in a 67 fastback, or are there just the two side lights? If so, pictures of this light would be appreciated. Thanks.
  6. Buford19

    67 barracuda heater box.

    Are all A body heater box the same. Need a heater box for my 67 barracuda. What are my options?
  7. Buford19

    Oil pressure not registering on Dakota digital gauge.

    Just started my 6.4 crate mopar crate engine. On the Dakota digital gauge oil pressure is not registering. The gauge cluster is hooked up to obd2 reader, and bus was selected for input. The engine has been primed before I started it, had valve cover off ,and oil was up in the head. The tach on...
  8. Buford19

    Rear shocks with cal trac?

    Just wondering what brands of shocks people are using with cal trac? The cal trac brand, or others? Currently I have split mono leaf springs with one inch drop, with cal trac. With my car at rest there is about 15 inches between the upper and lower studs. Now I am looking to buy rear shock to...
  9. Buford19

    Mopar crate engine harness

    Where do I connect these two wires coming from the pcm? First wire 16 gauge fuel pump feed: positive output for an electric fuel pump. Next is a 12 gauge cooling fan feed. ( positive output for an electric cooling fan. 30 amp fuse. Just to clarify things I just installed a Ron Francis express...
  10. Buford19

    Heater box for A bodies.

    Have a 67 fb barracuda, that’s in need of a new heater box. Which years ,if any of other A bodies mopars are compatible? Have a friend with lots of Duster and Dart parts, wounding if this is a option.
  11. Buford19

    Mopar pcm

    Is there a way to connect a laptop computer to mopars pcm, or wiring harness? Using a Mopar Performance wiring harness for a 6.4 crate engine. Would be nice to monitor the engine durning break-in.
  12. Buford19

    Battery relocated in trunk.

    Was wondering what route people are running battery cables from the trunk location? Is it best to run them outside right away , or keep them in the car as long as possible?
  13. Buford19

    Cold air intake.

    Cold air intake for gen 3 hemi swaps in a body mopar. Is the a aftermarket one that fits this application? If not any suggestions to building your own? Pictures and ideas would be appreciated.
  14. Buford19

    How to remove shifter column

    How do I remove the shifter column, from my 67 barracuda? Want to disassemble the entire steering column, but can’t get this shifter column off.
  15. Buford19

    Trunk rubber seal

    Is this the proper way that the trunk seal is applied? Know there’s lots of threads on this, but I want to be sure. This is on a 67 barracuda. Thanks for any info that make this clear.
  16. Buford19

    Fastback barracuda rear quarter window install.

    Can a person install the rear quarter glass, before felts? Is there a particular order that the glass and hardware have to follow to install? If so, what is the proper sequence to follow.
  17. Buford19

    Hydraulic clutch

    Has anyone used one of these wilwood master cylinder for a hydraulic throw out bearing on a A body mopar?If so where did you locate it on the firewall? Was thinking of installing it where the mechanical linkage normally goes through the fire wall. This seems to be a long way from the clutch...
  18. Buford19

    Milodon oil pans

    When changing over from a stock gen 3 front sump oil pan, too a Milodon mid sump pan. Can you used the factory oil dip stick?
  19. Buford19

    How to correct this problem.

    After installing bell housing and block plate. The face of bell housing and face of engine block is out almost 10 thousands. It’s is at zero around 8 o clock, out .0010 at 2 o clock. How would I correct this issue? Would removing powder coat on high side of bell housing correct this?
  20. Buford19

    Weather stripping

    Who makes the best aftermarket weather stripping for trunk, and doors? Also who do you buy them from? Need it for 67 fb barracuda.
  21. Buford19

    Hood hinge spring.

    Can a person remove the coil hood spring on a A body mopar? Is so how do you remove it? Currently I have it at this stage.
  22. Buford19

    Fender script and fish location help.

    Trying to figure out where to locate front barracuda script and fish location. Already have the holes in the right fender, so I transfer them to the left fender. It seems that the fish is about a half inch ahead of the other fender. That if I use the same front hole on each side. Currently I...
  23. Buford19

    Has anyone seen this before?

    My body man pointed out these holes, ask me to weld them up, thinking they are rust holes. Both wiper locations have the same hole,I was thinking it maybe a drain holes. He said he has never seen that before. Dose anyone have any knowledge of this subject. Here’s some pictures.
  24. Buford19

    [WANTED] Rear folding seat part for a 67 fastback barracuda

    Looking for the two cams and bushings for the rear folding back seat of a 67 barracuda FB. As seen in the picture below. Thanks.
  25. Buford19

    67 barracuda fastback

    Is there a supplier for this part? The part is a cam from the rear folding seat, that unlocks the seat to fold down. Need both sides, also the nylon bushing that is used with it. Picture included.
  26. Buford19

    Clutch size on on gen 3 crate engine

    What size is the flywheel and clutch on a new gen 3 hemi crate engine? Notice on the mopar performance site, their crate engines come with flywheel and clutch assembly. Is it a 11” or a 10.5”.
  27. Buford19

    Front script emblems

    Are the holes for the fender script (barracuda) different on a 1967 then a 68? Also same question for the little fish below the script. Here’s a picture of the holes on one of my fenders,pretty sure the fender is from a 68. My car is a 67 fb, and I was wanting to use 67 emblems. The emblem I...
  28. Buford19

    Help selecting o/d gear ratio

    Going to order a 5 speed tremec tranmission tomorrow, I have a option of a .82 or .64 overdrive fifth gear. Which would you choose. Going to be running 410 rear end with 28 inch tall tires. The engine will be a 6.4 gen 3 hemi in a 67 barracuda.
  29. Buford19

    Passion 5 speed

    Dose anyone know if there is still a waiting period for a passion 5 speed tranmission? Also,how many people on this site are running one, and how are they performing?
  30. Buford19

    Silver sport tranmissions

    Has anyone had any dealing with this company, thinking of buying a tremec 6 speed from them. Seem like a good company to deal with, what’s your thoughts or experiences with them?
Back
Top