Search results for query: *

Well 1st off, lunati tech support really sucks. 2hrs 45 minutes and got hung up on. My issue was my mistake tho. I ordered the voodoo cam/lifter and spring PKG. Cam # 10200703. Spring # 73195k which was fine and dandy for stock x head spring height however, I got the speed master heads bug from...

I got a set of the aluminum heads and had them reworked to assure they were good to go. Recut, port matched etc.. My problem is I decided to use the lunati voodoo 703 cam and bought the recommended springs for the cam but when I went to change the springs over, I noticed they are not the same...

I want to buy a set of these for my 340 e body and need to know something about the exhaust ports are raised. Will that cause any interference with the dougs d453 headers? Also, do they have hardened seats for unleaded? Main reason thst I want them.

Mancini has this alternator which states that it is 1 wire compatible but I have a later 2 wire external voltage regulator. The pic shows another terminal with a wire from inside it hooked up. IE a ground, I guess. Can I disconnect that wire and hook up the other wire? They are having a sale...

65 cuda, 68 hemi dart, duster, demon etc... Post it. Who has the fastest mopar in the USA. Include any gen 3, hellcat, charger, challenger or swap. Show your time slip! No altered dragsters or funny cars. We all want to know who owns the most badass mopar. East-West-North-South. Canada and...

Seen this on harrisburg pa craigslist if anyone is looking for 1.

I am building another 340 thats now .040 over 10.2 compression with scat rods and 65cc j heads with 2.02s and I bought the lunati cam after talking with them, it seemed like the way to go. I also got the springs and lifter package with comp cams 1.5 rockers. I have always ran purple shafts or...

Seen this while browsing Craigslist. I am not sure if this is the correct way to show the car as I don't know the seller but looks like a good buy. The info is posted for sale in Reading Pa.

Been trying it daily. Lol

The temperature has dropped into the 80's and got some work done finally. A body is performing as it should but want another addition to my family! The engine bay has become an overall issue as to where do I stop once again. I always want perfection with anything that I do but my new saying...

Was out for a putt in the barracuda and noticed my oil psi was up past 80 and hitting the 90psi range at the end of my ride so it got me thinking why it was so high. Normally 65 to 75 psi range. So I just parked it becoming frustrated. Then today I went to assess the issue and noticed the gauge...

Recently have had an amazon infestation in my neighborhood as they bought an old flea market and are using as their hub till they build a 1,200,000 sq ft building on the property. This is a small, quiet, small town that has been ruined by the big corporate enterprise. Now it's sit and watch...

My son in law was playing with gun powder all day on the 4th. Trying to make a 1/4 stick, he couldn't get the big bang that he wanted. As the alcohol set in, he eventually gave up with the glue stick and poured a trail to a can with what was left. Then the warning came. I told him over and...

I was thinking that the members could meet up at a certain time on Saturday at the show somewhere. What do you all think?

I dropped off a # matching motor to have freshened up towards the end of January. It did need bored and I asked to have freeze plugs put in along with cam bearings. Crank needed polished only. I bought new pistons and rods for and asked to press them on, balance the assembly. Gave them the cam...

I,ve had this holley 850 carb for a while and it has corroded from sitting and I do have a rebuild kit for it. I know there is a soaking solution that the lawn mower shops use to clean them. I thought about a dremmel and small wire wheel but it might score the casting. Anyone know what a good...

Mancini had these posted as new items from mopar. I haven't seen them before and grabbed a set for my new build. They have a wrinkle finish and raised height for clearance. Something different than the cast, ribbed style or M/T, stock steel etc. The t handle fasteners are old school and...

Dropped my 2015 j7 phone for the last time the other week and never thought about all the pics from my build with the car. From when I dragged it home to completely restored. Not to mention stored #s, grandkids growing up, and my business contacts. I was never too phone savoy and had nothing...

Im restoring my engine compartment back to original as far as I can except the ignition will now be MSD and a few mods to the motor. Intake, carb, and valve covers. I really need a pic of the blower motor area on the firewall as The hole is open around the motor and seems to be oval somewhat...

Been a long time since I got to fire a 340 and bought up some old stock champion n9y plugs as that was my preference years ago. Appears they dont make them anymore. I also used ngk bp6es and dont care for the resistor type. I may also need to go a step colder but not sure till i get to start the...

So I had a 340 built 22 years ago for some drag racing in my demon but was then warned to tie the car together and cage it so it went on the back burner and I ended up building 3 other cars since. 340 forged internals .030 over venola pistons 11.0 total compression port matched heads to m1...

I am finishing my 68 barracuda build. All exterior lighting/ turn signal and dome/map/glove box/lighter/ trunk lites work however no dash at all. No indicator brake hi beam or illumnination lites. Flashers arent working either even after changing the signal stat. Changed out all bulbs just...

Anybody know if there is an inner tail light diffuser to stop the brake bulb from glowing into the reverse light lense? Any help is appreciated. New guy here..

Tail light bulb glows into reverse light area. Is that normal or am i missing an inner diffuser?