Search results for query: *

Not sure the old gears and bearings were tight enough for ATF, but it would certainly shift a lot easier in colder weather and it will be a lot noisier. I looked @ brewers' site and they recommend Brewers recommends GL4SL ONE GALLON STA-LUBE 85W-90 WEIGHT GEAR OIL Get a gallon jug and you...

@TrailBeast, My grandparents owned the bar @ Kirkland junction in the 40-50's. My grandfather is also buried in the Peeples Valley Cemetery. Pasqualetti was thier last name.. The Baghdad Hiway (97) should be a mandatory drive for any car enthusiast! Small World.

The Lucas is nice stuff..

Flat tappet cam, it’s a good idea to break it in with the light springs.. Roller cam it’s not necessary.

Most likely PAC springs

fast car!

Better than the eclipse!

Are @ PIR? My mom lives real close..

Here is their foundry....

That is per head, be sure to check out the discount thread or search out a summit coupon. You could save as much as 200.00. BTW the Trickflows are nice real too. Trickflow is owned by Summit. IMHO You get what you pay for, but there is other folks who choose to go the chineseium way which...

Today's fuels are more corrosive than fuel from 'yester-years. This is surely a prophylactic measure, that it'll avoid potential issues in the future. The cost of removing, cleaning and inspecting the old tank will exceed the cost of a replacement tank for sure.

If you already noticed the bleeders were spinning without coming loose it may be too late. Be careful with the heat, especially around the rubber components. I sometimes use transmission fluid mixed 50/50 with acetone as a home brew, for me it works better than commercial penetrating oils at...

Main reason I went with the LED is the 1.5 amp draw instead of the 5-8 amp draw of sealed beams. I have EFI, an electric fuel pump and dual electric fans on the radiator, so my main concern was not putting too much strain on the antique wiring. When I had my dart in for the makeover, I had the...

What is up with the site? I keep getting errors when trying to post.

Click the word TRUKLITE for the link

I use these lights..I have been running them in my jeep, and my dart for 10 years.. they are basically plug and play and require no mods to your wiring. They pull very low amperage too. there are less expensive ones and they are total crap, don’t waste your money.

I bet it will be really quiet with all that insulation in there, prolly couldn’t even tell you have a 3/4 race cam!

Before Al Gore invented the internet you could not get one unless some one died and their family sold it without knowing what he had.. ALL 340 and Hemi parts leads mostly lead to a waste of gas and time.. nowadays you can get them pretty cheap.

A friend of mine has a business that makes custom pieces, one offs or thousands. He told me if you have a cad file available just send it over and he will cut it bend it coat it or anodize it, what ever you need. Online Laser Cutting and Waterjet Cutting Service

Caint we all just get along?

Small Block Mopar Windage Tray - auto parts - by owner - vehicle automotive sale - craigslist

Small Block Mopar Windage Tray - auto parts - by owner - vehicle automotive sale - craigslist

Might wanna take it to a machine shop, they can get it out and avoid damaging the intake.

If you use studs you will have to have the block line honed with the caps torqued to the required value the studs are specify. Typically they require a higher torque value which can make the main caps slightly deform.

Yeah and they usually have zero accessories attached. electric water pumps and highly tuned carbs etc..

Not sure a 904 transmission came with a stock converter that would have enough stall to make a 340 work well. Plus, none of the 340 cars I have had ever came with a 904 stock. I have swapped them in myself for assorted reasons, including one that is currently behind my 408 in my 72 dart.

Depending on your budget, this is a pretty sweet combo TRICK FLOW HEADS , add this manifold Edelbrock Performer RPM , and THIS CAM all this should work with your stock converter, and be a blast to drive on the street. if you hit up @pittsburghracer or @GTX JOHN sometimes they have 10% off...

Best of luck locating your car Jim. It is a fantastic looking.

Pretty sure it will... the parking pawl is probably the same as a 727, turn the key to release the interlock and shift it into any gear to push it. Unfortunately, you can't tow it with the driveshaft attached.

As long as there is no positive deck height, and a stockish cam, would a set of thinner gaskets help get a little bump in compression, like a set of .027 metal gaskets? I recall that the 440's came stock with those.