Search results for query: *

Does anyone have any blue Mopar or Gold Crane 1.5 exhaust rockers for W2 heads? This the offset shaft style used with aluminum rocker stands.

I'm looking at big inch SB stroker kits from Ohio and Hughes based on a 360 block. Ohio has a 4.1 inch crank kit that'll go 425 inches with a 4.060 overbore, (418 with a 4.030 bore). Hughes is 4.180 stroke with a 4.030 bore for 426 inches. This will be a drag race only engine in my Dart. I'm...

Anyone running an alternator with an electric Moroso belt driven water pump kit? I have a 68 Dart race car with a 360 LA motor. I've been running no alternator for 14 years of racing, charging battery between rounds with no problem. However I've decided to add an alternator to speed up...

Does anyone know if a quick change timing cover is made for the LA engine?

I need at least one W2 head exhaust valve. Part# P5249197. It's a 1.60" valve 5.29" long. I'll buy all you have. I'll also buy 2.02" intakes, part # P5249195, but I need an exhaust valve immediately! Thanks! Tim

I need 16 of part # P2946353 Mopar Performance Parts valve springs. Tim

Centerline Autodrag wheels, 15 X 10 with 4.5" bolt pattern. Need 2 please. Tim

For anyone that has used the Mopar .590 cam in a small block. Did you install it straight up, advanced or retarded? I have heard that this cam works well with a 6 degree retard.

Small block Indy heads with rectangular ports. Prefer complete with rockers and shafts.

I'm looking for a Mopar Performance 590 lift cam for a small block. Part # P4120657 with lifters. Used preferably, as I really don't want to break it in. Matching lifters to the lobe please! I'll take a new one if necessary. Thanks! Tim

Does anyone have the alignment spec's on a 76 A-body? I also need the spec's on a 68 A-body. They're probably the same. Thanks!

I have a co-worker that is looking for a 3 speed manual trans for his 65 Dart Wagon. Anybody got anything like that?

I am looking to clear up some misconceptions about the front cam plate on LA engines. Actually I don't think they're any different on Magnum's as well. On the oil galleys behind the cam plate is a freeze plug. I have heard that you should drill a very small hole in each plug to let oil out...

Used Hughes Performance 24-35 Torque Converter 3500 Stall - A727 24Spline w/ 360 CID Balance Weight for external balanced 360 cast cranks. Will not work with 360 forged cranks that are internally balanced unless you remove the balance weights on the converter! Good converter with no problems...

Brand new in the box Mopar Performance Purple Shaft 590 solid lifter cam for small block LA engine. Includes lifters. Part# P4120657 Lift: .590 Duration: 312 degrees Duration @ 50: 265 degrees Overlap: 104 degrees Centerline: 106 degrees Great cam for bracket racing. $195.00 firm...

I've read and been told that long valve W2 head valve spring installed height is between 1.9 and 2.0 inches. Is that correct? I found an old post from 2006 that Guitar Jones said 2.0 inches. Thanks!

I have a good 360 block for sale. Standard bore. I bought it several years ago to make a spare engine but don't need it. I will strap it to a pallet and ship it by truck. Will also work with a buyer to deliver it in Arizona, especially Phoenix metro or Tucson if your flexible. I have...

Mopar Performance Intake, single plane, brand new in the box with gaskets. Will work for standard heads (not W2 or Indy). Will also work on Edelbrock Performer's. Will send additional pictures on request. Part# P4876334 $150.00 including shipping anywhere in the continental U.S. I...

I have a BRAND NEW 508 Mopar Hydraulic cam with lifters for small block LA engines. Never been run. Came in a Mopar Performance short block I purchased 7 years ago. I took the cam out and put in a larger solid. After 7 years sitting on a shelf I have no use for the cam and will sell it...

I have acquired a Mopar Performance camshaft. .590 lift, 312 duration. This cam has been around for a long time and once was very popular with the Mopar bracket race crowd. Does anyone have any info on this? I've heard that it works really well installed 4 degrees retarded. Anyone tried...

I have a back-glass from my 68 Dart that I took out and replaced with Plexiglass. It's the original glass according to the shop that performed the work. Been in the car for 42 years, and it's cherry. According to the fine members here at A-bodies it fits any hard-top Dart from 67 thru 76. I...

I have a back glass out of a 68 Dart. I recently replaced the windshield and back glass out of the Dart with Plexiglass and have a cherry back glass. My question is: What years will the back glass fit? I know it will fit 67 through 69. Any other years?

I have a 68 Dart bracket racer with a 360 in it. Car weighs in at 3,000lbs with my tubby body in it. Tranny is a 727 torqueflite with a 4500 stall converter, 8-3/4 rear with 4.57 gears. I shift at 6500 and run through the traps at 6800. Engine is a Mopar Performance short block with small...

Anybody remember the name of a machine shop that resides in Pennsylvania that specializes in Mopar small blocks, specifically cylinder head porting?