Search results for query: *

i purchased a set of powder coated mopar 15x7 steelies. I have a 70 dart with a 8 3/4 what size tire can I fit on front and rear?

Looking for a case 489 please. Let me know what you have thanks

As title says

Hello I need a yoke for the a833 trans please

I am in the final stages of my 340 build and my old 318 had a "mechanical fan" (not sure if that's is correct term) should I get one with a clutch? It's a 70 dart

where is everyone putting the msd box and coil. Is it possible to mount them under the dash or in glove box? Really trying to keep the bay clean? Pics would be great

hello I am looking for the two hole harness straps in black who sells them?

So I have a 67 barracuda fastback car is fairly complete. Missing front seats and some interior stuff. Body has some rust and bad dent on the driver door. No rust on frame. I was told it's a matching numbers 318 don't know much about the early a bodies. I don't have a ton of money in the car but...

So I am building a 71 dart 340 4spd. It's almost done and need a driveshaft. The 8 3/4 is a b body and has the larger joint. I don't have a trans yoke for the a833. I am building the car to handle and be nimble. Is there a significant advantage to a custom shaft?

I purchased a new z bar from brewers And I had to go with a modified. Brand new paid 90 let it go for 70 shipped

i have a brand new fitech 400hp unit with command center. Box opened and never installed. My father bought it for his 318 and went a different route. Summit has it for 1190.00 I will do 900 shipped

Looking for a shift knob and boot for a 70 dart 4spd no console

need a new temp sensor for factor gauge and wire. What unit is everyone using?

Just putting my harness back in the car and I have a blue wire not tapp d in the harness with a factory termination by the rear passenger valve cover. What is this for I would download the diagram but I use my iPhone for everything and can open a zip file Thanks joe

just curious what everyone likes. Please specify model

Hello I am looking for a wiper harness for a 70 dart thanks

As title says need help with cam install on hemi 6.1 will pay cash, beer, parts, lol

Looking for someone to help with a cam swap on my 6.1 hemi in Nj will pay cash for your time

not sure if there is a difference in years. Dosent need to be date correct. Running power steering. I would like the bolts also

ok so I am working on my wiring harness now. It's a 70 dart and I am adding fitech fuel injection and msd dist with 6al. I want to take the factory harness and remove anything I don't need and then add the new wiring making one factory looking harness. My question is what items can I eliminate...

i am looking for a good set of radiator hoses. Also does it make sense to delete the heater hoses if the car won't be driven in the cold? If so how is this done with plugs in the waterpump? Thanks Joe

I ran across this in another post, is this custom or can it be purchased?

70 dart b body 83/4 pst springs bilstien shocks. Front discs 73+size right stuff setup. 1.01 torsion bars. Tube control arms. I am building it to be a handilibg machine. I have a set of mustang bullit for mock up. The hubs are too small on them. But long sorry short I like that look or the torq...

I purchased a rebuilt 340 5-31-72 four years ago, with rebuilt a833 attached to it. New summit dual plane intake, new water pump, new mini starter, new alt, hurts short shifter and new clutch flywheel. Paid 1400 total It's been sitting for 4 years I always turn it over and check oil. Stored...

Looking for a a833 inspection cover. I am not sure if they vary by year but it's going in my 70 dart

hello, after a 3 year stall in my project I am back to it. its a 70 dart swinger one owner. The engine bay is painted and I put the 340 in. I am working on cleaning up some of the various parts and the engine bay harness is next. It is very original with not splices or cut. it has the original...

I am looking for a power steering pump with brackets and hardware along with lines, its going into my 71 dart Thank You, Joseph Moy

hello, i am looking to order stainless trans lines, i am looking at a factory type radiator with the trans cooler lines on the bottom. This is not a crazy HP build looking for more stock type. When i look for trans lines they are just Abody, will these work on a 833 or 904? Thanks, Joe

Hello I am building a "semi" pro touring car. I have hotchkis rear springs in the back and 1.03 torsion bars. I am thinking the car will be 1-1.5 inch lower than stock. I am running a b body 8 3/4 rear that is about .5 inch wider each side. I like the look of 18 in rear and 17 in front. I will...

My goal is to build a very bad *** handling a body. I have owned many mopars all levels of hp but NONE that actually could take a turn. I purchased a one owner 70 dart and put it on the lift and removed ALL suspension. I have a 340 a833 ready to drop in. This is what i have ordered so far...