Search results for query: *

  • Users: CdnValiant
  • Content: Threads
  • Order by date
  1. CdnValiant

    1969 Barracuda 383 Cold Case Radiator

    I purchased a Cold Case 22" Rad for a big block Barracuda MOP756A-5 which has the 1 1/2 upper rad hose off center to the left side and a lower 1 3/4 rad hose. The lower hose is inset 2 inches further from the left side when compared with the original mopar rad. Installation was fairly straight...
  2. CdnValiant

    Thumbwheel Radio

    The radio pictured was in a 69 Barracuda, but is not the correct radio. Others I see have Plymouth, Dodge or Chrysler on the frequency display. It works ok other than it won't completely power down. Volume goes to near zero but can still be faintly heard on a quiet bench test. Any ideas on what...
  3. CdnValiant

    1964 Valiant automatic rythmic vibration

    My 64 Valiant 273 has a vibration that comes and goes in about 2 sec cycles from about 40 to 65 mph. I thought it might be the ball and trunnion at the front of the driveshaft, so pulled the driveshaft to check it out. As the transmission has a flange at the back, the car can be run without a...
  4. CdnValiant

    [WANTED] 1964 Valiant Speedometer gear wanted

    Changed ring and pinion and wheel and tires on my 64 Valiant 273 push button auto and need a 19 tooth speedometer drive gear. The original gear is a 17 tooth with markings D-17-T.
  5. CdnValiant

    Valiant 7 1/4 differential

    I have pulled apart the original 7 1/4 rear end to change gears from 2.94 to 3.23. I had purchased the 3.23 gears on ebay new for $50. almost two years ago and all looked OK at first, however the pinion end is 7/8 fine thread on the 3.23's as compared to 3/4 fine on the originals. The ring gear...
  6. CdnValiant

    [FOR SALE] 1969 Barracuda Fastback rear glass trim

    Complete set of Fastback rear glass stainless trim. Not perfect but very good some small dings easily fixed and polished. Asking $500 obo
  7. CdnValiant

    Mopar electronic conversion fires 4 cylinder only

    I have assembled and run a 451 in my 69 Barracuda. I retained the mopar electronic ignition I ran on the original 383 and it was working well the few times I have run the 451 in my shop. Today the car was hard to start and when it did start appeared to run on 1,3,5,7 only. Header stayed cold on...
  8. CdnValiant

    Mopar electronic ignition

    I have assembled and run a 451 in my 69 Barracuda. I retained the mopar electronic ignition I ran on the original 383 and it was working well the few times I have run the 451 in my shop. Today the car was hard to start and when it did start appeared to run on 1,3,5,7 only. Header stayed cold on...
Back
Top