Search results for query: *

  1. M

    Borgeson Steering Box Adjustment

    HELP!!! I put a new Borgeson Steering Box in my 71 Valiant. It has had some play and needs adjusted. Everything under the car is new and there is definitely play in the box. My problem is that with the retaining nut loose, I can not turn the adjuster screw, it simply will not turn. I've got...
  2. M

    AC Suction Service Port

    Ahhhh. You are right, the expansion valve screws on there. Got the tubing brazed together and have the crimp tool. THANKS!!!
  3. M

    AC Suction Service Port

    Hello. I am working on converting my R12 to 134-a... Wasn't an AC car before. 71' Valiant 360. Everything is installed except hoses which I just got. Cut off old hose and got Beadlock fittings for new hose. High side should be OK. although I burned a hole in the tube trying to un-sweat the...
  4. M

    Berrier Hose replacement

    Hello, I am replacing hoses on my Valiant A/C to convert to 134-A. What are the sizes of the hoses? I think the High Pressure is #8, 1/2" and Suction is #12, 3/4"??? Thanks
  5. M

    [WANTED] Valiant Small Block AC Hoses

    So.. I am still in need of the Hose running from the Compressor to the Condenser. Any luck out there?
  6. M

    [WANTED] Valiant Small Block AC Hoses

    Thanks, What are you thinking for the one with the muffler, shipped to Tiffin, Ohio 44883
  7. M

    [WANTED] Valiant Small Block AC Hoses

    These are the ones for the Slant 6. This hose is the one from the compressor to the Evaporator. The top horizontal length will be almost 0", or I guess the bottom leg length could be a lot longer??? May or may not have a muffler. This one is the one from the Compressor to the Condenser. The...
  8. M

    [WANTED] Valiant Small Block AC Hoses

    Sadly I do not have them, but I do know that the one I need from the condenser to the Compressor (smaller diameter and has the two bolt ear attachment to the front of the compressor) has about a 18" section of flex hose where as the slant has about an 8" section of flex hose. The larger...
  9. M

    [WANTED] Valiant Small Block AC Hoses

    Well... It is a 71' Valiant with a 360. Had a Slant 6, Upgraded to a V8.
  10. M

    [WANTED] Valiant Small Block AC Hoses

    In need of both compressor hoses for my RV-2 Small Block. One to Condenser, One to Evaporator???
  11. M

    [WANTED] Small Block A/C Hoses

    Hello, Looking for A/C Hoses for 71 Valiant with a 360. Thanks
  12. M

    Carb recommendation

    OK, so just to be clear, i can order a Square Bore Edelbrock or Holley Carb that will bolt right up to my existing 340 Intake that has smaller primaries?
  13. M

    Carb recommendation

    What about a Demon 1904?
  14. M

    Carb recommendation

    Ok. Thanks, Learned something new :) Always considered smaller primaries being a spread bore. So, now that we have that straight. Recommendation??? I will check on the cross over gasket, not sure which set I put in when I rebuilt it. Either way, still looking for a new carb.
  15. M

    Carb recommendation

    This is the 4611s I have. Isn't this a spread bore? Also I have this on a OEM 68 340 Cast Iron Intake, Bores match. The plate (adapter) i have is just a heat sync plate, not spread to square.
  16. M

    Carb recommendation

    Carter AVS Carburetor H8 4611S. Thats the tag, and it is a spread bore??? Would like a modern replacement for that carb.
  17. M

    Carb recommendation

    Any model number on that Holley?
  18. M

    Carb recommendation

    Well, no. I was told by the guys around here that those carbs have a problem with the gas boiling out since the bowls are on the bottom. I do have a thermo adapter that seems to help a little but the car definitely seems like it is flooded from the gas boiling into the intake every time it is...
  19. M

    Carb recommendation

    Hello, Trying to pick a new carb for my 360 build. The Carter AVS is leaving me stranded all the time when I let the motor sit 20 minutes. It is a new rebuild out of a Lil' Red Express truck. Certainly makes my 71 Valiant fly. I have a spread bore intake on it off of a 340. So I need to...
  20. M

    AC Hoses

    79' 360 from a Lil' Red Express in a 71' Valiant with a 74' Dart air/heater box. LOL. I would think the 74' setup is what I need.
  21. M

    AC Hoses

    Hello, Anyone know where I can get a set of Small Block\A body A/C Hoses?
  22. M

    Shredding belts.

    just did a few 1/4 mile runs and some normal driving. That 4 blade kept things under 180f. Might just see how it goes with that. Seem small but its 80+ outside right now. Anyone know if a 4 blade was ever on a 360??
  23. M

    Shredding belts.

    Alright to all you Mopar brains. I changed the fan and put the old 4 blade from the slant on it and lo and behold I quit squeeking belts. So I guess I will need a clutch for that 7 blade fan. Its running 15 degrees hotter with the 4 blade. I was sure it was the PS Pulley, I was wrong! That's...
  24. M

    Shredding belts.

    I have it tightened to about 1/4" play. It is pretty snug. It takes about 4 or 5 times to absolutely trash the belt. This really started after using Synthetic Fluid and the 7 blade fan.
  25. M

    Shredding belts.

    Thanks for the question. So my boy is driving it right now. It is only when he getting into it that this is an issue. If he drives it normal the belt is fine, no slipping through the entire RPM range.
  26. M

    Shredding belts.

    For anyone new 71 Valiant; replaced Slant 6 with a 360 out of a Lil Red Express. Alright, I'm not sure if anyone is still on this thread but I did some work last light. Took off the PS pump and checked pressure valve. The shafts\pulleys are different for my old slant one but I did change the...
  27. M

    Shredding belts.

    It looks like the PS Pump literally shutter stops when turned and the belt continues to spin on the stopped pulley? That's where all the belt dust is coming from all over my fan and engine? The dust buildup is right by the PS pump and on the fan. I checked it a couple times this last belt and...
  28. M

    Shredding belts.

    SO I just started things up to check some of the suggestions. It appears that when the steering is cranked all the way, the PS Pump actually chatters and appears to drag while the belt continues to spin on it. I replaced my PS Box with a Borgson PS Box a while ago so I dont think it is the...
  29. M

    Shredding belts.

    That is the number of the belt.
Back
Top