Search results for query: *

  1. A

    Who wants a mopar turbo kit?!?!

    What's the compression on your motor?
  2. A

    Who wants a mopar turbo kit?!?!

    So now I wonder will my stock bottom end ( except forged piston) hold up to that much boost with race gas. Are you running a block girdle?
  3. A

    Who wants a mopar turbo kit?!?!

    Now here comes all the questions, this is a stock bottom end right? How much boost do you plan to run?
  4. A

    Time marks

    Thanks
  5. A

    Time marks

    are the timing mark on the timing chain cover on the same side for 318 and 360 or do the use different covers?
  6. A

    Edelbrock heads (cam selection)

    So much knowledge and I love it. The cam I have is install BUT I will upgrade. So what the part number on that cam that your ran with Eddie heads ootb? My head have only had valve job and check by a machine shop. With this cam you are talking about and 2800 shall and maybe a 200 hp shot what...
  7. A

    Edelbrock heads (cam selection)

    Maybe you misunderstood me, right now I have this cam.. Which came in the edelbrock top end kit. Which is recommended to use with a 3000 stall
  8. A

    Edelbrock heads (cam selection)

    Plus a 2step set at 3000 rpm
  9. A

    Edelbrock heads (cam selection)

    What's wrong with the 2800-3000 stall I have now? That what that edelbrock recommend it for that cam
  10. A

    Edelbrock heads (cam selection)

    Yes is see you point I'm just going to run what I have. The for shining the light
  11. A

    Edelbrock heads (cam selection)

    It should hook well too, I am going to run Caltrac with mono leaf springs and 90/10 shocks up front and tie it all together with subframe connector and a 8 point cage
  12. A

    Edelbrock heads (cam selection)

    Man I just want to have fun with the car and be able to hang with LS guys lol
  13. A

    Edelbrock heads (cam selection)

    Dodge Aspen
  14. A

    Edelbrock heads (cam selection)

    The TC is a TCI unit, so yes off the shelf
  15. A

    Edelbrock heads (cam selection)

    My current setup is forged and the valve to piston clearance is good. No I have not ran the car yet, just thinking it won't be enough, but maybe your right just run what I have and see what it will do and go from there. Thanks for the advice.
  16. A

    Edelbrock heads (cam selection)

    Yes the car is only a weekend warrior, meaning I only drive it when it's time to play. The motor is together now but I feel I can do a lot better with the cam selection. I'm just trying to change the cam to get better power. The TC that's in it now is 2800 stall. I have not selected a rear gear...
  17. A

    Edelbrock heads (cam selection)

    Ok maybe I should try that then, right now I have package five-b. I just figure it might not be enough even with a 250 hp nitrous. The purpose of this car is to street race on the weekends. But there are some fast cars on the street at night lol
  18. A

    Edelbrock heads (cam selection)

    My compression is about 10.4
  19. A

    Edelbrock heads (cam selection)

    I have edelbrock RPM head 60779, my question is will the springs on these heads work with comp cam 305AH-8 525/540 253/260 @.050. The reason I chose this cam is because, of package Nine Flow numbers on this head
  20. A

    Has anyone ran these Pistons (icon)

    Has anybody used these piston in your Sb mopar? With or without nos?
  21. A

    Can you guys help me figure out my Compression ratio

    By all means thanks for the feedback. What band and how cold of a plug did you run.
  22. A

    Can you guys help me figure out my Compression ratio

    I don't have one in my car.
  23. A

    Can you guys help me figure out my Compression ratio

    What's normal operating temp?
  24. A

    Can you guys help me figure out my Compression ratio

    It should be a fun little street car about 550ish hp
  25. A

    Can you guys help me figure out my Compression ratio

    It's all together it runs fairly well
  26. A

    Can you guys help me figure out my Compression ratio

    I basically have package five-B
  27. A

    Can you guys help me figure out my Compression ratio

    Very small cam for now. The car is a weekend fun car street racing and 200 hp shot is the plan
Back
Top