Search results for query: *

  • Users: SR77
  • Order by date
  1. S

    Heat sink style trans coolers?

    3500 from what the paper work says. All I have to go off is what the previous owner gave me, can't call him because he's no longer with us. The car is down now, working on the brake system so I can't street test. I have a trans cooler now but the damn thing seems huge.
  2. S

    Heat sink style trans coolers?

    Heat Sink : 2 Pass 20" Heat Sink Transmission Cooler Kit Or https://derale.com/product-footer/fluid-coolers/transmission/frame-rail/13220-detail I've been looking at these for awhile now, anyone have real life experience with either style? Car is a 72 Demon with a 408, 727, 3.91 gear, mostly...
  3. S

    Dr. DIFF cobra brake/ master cylinder question

    Not the expert, but i think it has to do with the order the brakes are applied(?) I'm guessing by looking at a cut away pic of a master cylinder.
  4. S

    Dr. DIFF cobra brake/ master cylinder question

    I do have a shop down the street and free towing. I'm tempted. I think we narrowed it down to a bad master cylinder only because we had air in the front then when we switched the brake lines to the correct ports we had air in the back.
  5. S

    Dr. DIFF cobra brake/ master cylinder question

    No hard lines where replaced, just new hose to the calipers. The master cylinder is a 5 year old classic performance 1.031 bore purchased from Summit. Not a lot of info on Summits page as far as disc or drum or by doing a web search.
  6. S

    Dr. DIFF cobra brake/ master cylinder question

    It had an aftermarket small disc setup, I believe a Right Stuff kit. Proportion valve looks original. The drums came off and we pulled the dust covers off and seen no seepage.
  7. S

    Dr. DIFF cobra brake/ master cylinder question

    We used the existing master and we tried bleeding it while it was on the car.
  8. S

    Dr. DIFF cobra brake/ master cylinder question

    Bleeders are on top, no brake fluid in the carpet or seen leaking on the interior
  9. S

    Dr. DIFF cobra brake/ master cylinder question

    Two man system, we checked the wheel cylinders and did not see any sign of leaking. Not losing any fluid either.
  10. S

    Dr. DIFF cobra brake/ master cylinder question

    I'll provide as much info as I can, so this might be a little long. I'll just break it up into sections. VEHICLE: 72 Dodge Demon 340, purchased it back in 2013 with I believe a right stuff manual front disc brake kit. Decided to install the Dr. DIFF setup for better braking and liked the...
  11. S

    Post your wheel and tire combos.

    Front:225/45/17 Rear:275/40/18 Rim: American Racing VN507 17x7/18x9.5 0 offset front and rear. Tire: Hankook Ventus Stock suspension, disc in front and drum in back on a 8 3/4 axle. Thanks to everyone that posted and especially to 72bluNblu. I've visited this thread a lot to get info on the...
  12. S

    Fitment question

    Awesome info, thanks. So a 18x10 +25 would work?
  13. S

    Fitment question

    72 Demon, large bolt pattern, 8 3/4 rear end, disc up front, drum in back (switching to wilwood or other upgraded disc all around next year). Looking at a set of 17x7 +38 for the front, 18x8.5 +25 for the rear. The rear is stock tub and previous owner half assed the fender roll front and back...
  14. S

    Difficulties Installing ABS Headliner in 73 Swinger

    Between house projects, and Hummer project, I finally got it installed. It was not cut even our something. I just cut some from the back and front made sure it was even, measured and I had a gap above the passenger side front door. I had some left over material from the new sail panels (same...
  15. S

    Difficulties Installing ABS Headliner in 73 Swinger

    I got my greased football, (I've been calling it the dish rag, as in limp as a dish rag), up but it needs trimming on the front and back. I'm pulling it tomorrow back out, laying the factory one out, laying this one over top, getting some tape and taping it down to the old one through the holes...
  16. S

    Difficulties Installing ABS Headliner in 73 Swinger

    Thanks for posting this. I’m going through the same thing on my 72 demon. At one point it was myself, my wife, and kid (shop light duty) monkeying around with the headliner. Wife was holding it up with her legs and I was literally using my head. We got frustrated and walked away. I think some...
  17. S

    [FOR SALE] 72 freshly covered A Body bench

    Just outside Detroit Michigan
  18. S

    Steering column conversion

    Thanks
  19. S

    Steering column conversion

    I want sure how the nss would operate with the gear selector and mechanism removed from the column and the floor shift conversion installed. Is there any wiring or anything in the column that needs to be altered? I assumed there is something in the column letting the nss know the car was in...
  20. S

    Steering column conversion

    Wasnt sure where to put this. I have a demon with an aftermarket floor mount gear selector. I want to install the column gear selector to floor shifter conversion on the column. Was wondering what to do to the neutral safety switch inside the column. It's there a by pass when installing the...
  21. S

    [FOR SALE] 72 freshly covered A Body bench

    Just pulled it out of my 72 demon. Recovered in legendary vinyl and relaced the foam. All professionally done. Only issue is the seat back release button broke off. The back seat will still lock upright and fold down but the knob is gone. Trying not to ship, prefer local pick up, will travel...
  22. S

    after market 3 point seat belts for front and rear

    doing a search i came across an install tutorial for a 70's mustang. they just drilled through the rear package tray shelf to mount a retractable seat belt. Install 3 point rear seat belts in classic 1964-73 Mustang i cant imagine it being too much different
  23. S

    after market 3 point seat belts for front and rear

    planning on replacing my front bench with some procar 90 series buckets. when I do I want to upgrade the seat belts. is there a go to manufacturer for mopars? I've come across julianos.com and a few other manufacturers but wasnt sure if there was one better than the other when it comes to...
  24. S

    what seats fit 72 demon

    Tried searching the forum but nothing came up and i swear i seen it on here before, but is there a list of junkyard bucket seats that will fit in a 72 demon. I thought i read old jeep Cherokee seats work but I'd like some other options. Have to match the rear factory seat pattern if possible to...
  25. S

    340 idles at 1500 won't stay running in gear

    replaced the needle and seat last night, no big difference. i did however get some carb cleaner and made another run at the intake manifold. this time i sprayed enough to make a puddle in one spot and heard it level out. so i have a vacuum leak one the drivers side i/m right in the middle...
  26. S

    340 idles at 1500 won't stay running in gear

    checked the choke early on I'll post pics of the soot I'm getting coming from the front of the intake manifold on the driver side. it starts up by the front corner and works its way back
  27. S

    340 idles at 1500 won't stay running in gear

    i checked the intake manifold bolts they where tight, pulled the needle seat and found whitish crust around the o ring, after cleaning it seen the o ring was turning white and was like dry rotted, it was still one piece but you could see very small cracks going around it. also the o ring itself...
  28. S

    340 idles at 1500 won't stay running in gear

    thanks for the replies, i at least have some other things to look at
  29. S

    340 idles at 1500 won't stay running in gear

    electric choke is opening didnt check the bolts yet havent checked the needle and seat. first time looking at the needle and seat, what would i be looking for? dirt build up, something cracked?
Back
Top