Search results for query: *

1967-Dodge-Dart-any Products | Pypes Performance Exhaust

Lost ours in February after 13 great years.

I have 2 plastic PCV Valves. Both of them rattle. I f I blow into the hose barbed end on one of them, it's totally occluded. The other one has a small amount of flow felt. Which one is good?

Not sure what you mean by "On the 3/4 lever, having it the other way meant adjusted to the end with some threads actually disappearing which I didn’t like.". You mean you ran out of adjustment? Is the 3/4 rod the correct length? I see you are looking for another lever. The one in your post...

They should work. That's why there are adjusters on the rods.

Per Accurate Exhaust A-body Tips

"Quarter Stick" is an automatic.

Lay the tunnel in place, trace it on the floor, measure 1.5" inward around the mark and cut away.

Had the same issue 14 Ram, 5.7 at 65k. Hooked up w/a friend who was a Parts MGR at a Chrysler dealer. Got new manifolds, gaskets and bolts for $450 n change. Had 2 sheared bolts on the front left side and 1 off the right side. I was able to remove 1 of the 3 but had a friend weld the nut to...

Sun block, hat and pop-up tent.

I used New England Chrome a few years back to rechrome 69 Dart tailight bezels and bullet turn signals. Great work. New England Chrome Plating | Family owned since 1965

Mine

You have mail.

Right here.

Ditch the 90 degree adapter and buy this. I can run any length oil filter with TTI's on a small block...

You have mail

1-2, 3-4 are original. Rev isn't but modified to fit.

Some more pix

Here ya go

As you can see in my pic attached above, NO!!! Had to weld a nut to the studs on the left side. On the right side, there was enough stud protruding to get vise grips on it. 2 on the left front and 1 on the right front. Installed new exh manifolds as they warped about 1/8?

Yes

Exhaust manifold leak, broken exhaust manifold studs due to warped exhaust manifolds both sides @60k miles.

Demonracer- what gaskets did you use?

Has anyone used Ansen's small block valve covers on their iron headed LA? If so, any leaks? What gaskets did you use? Thanks,

main Krusin Moons

Heard good reviews on Pypes Exhaust mufflers. www.pypesexhaust.com

How bout some pix of the trunk and undercarriage? Any chance for a video as well?

67Dart440GT Your in box is full.

Any updates? Is the car sold?

Never had a sway bar, had body roll, but didn't have any issues with tire clearance. Installed a front Hellwig sway bar and what a difference.