Search results for query: *

Hey all, I wanted to know if a set of 4 speed pedals would work on a b body? I need a set for my 69 roadrunner t56 magnum swap. TIA

Anyone know what happened to the 408 shortblock? It’s not on their site anymore..

Ok all, here is the scoop, replaced my printed circuit board with a new one, it came with a new voltage reg as well. Bulbs are led conversions. I have 12 volts at the twist lock but for some reason it wont wont light up. I replaced the headlight switch and still no lights. The gauges have...

What have you all done for this? I’m looking to freshen up my dash. I’ve seen the decal kits, do they look good? Thanks

Need a working gauge, anyone have one! Thanks.

I have a PDQ-492 2100-2400 stall converter for sale, might have about 4000 miles on it. Works fine I pulled it to install a high stall unit, it came out of an A518 behind my 318. Shipping from 95123 $100 plus the ride

So I found I have a later k from but want to swap to 68 linkage for better header clearance. Are the 73 tie rods compatible?

So I put a set on my 68 dart, but there is major contact with the idler arm and really close with the pitman. Anyone else have this issue? I had to take a hammer to my shiny new babies and it helped but it’s still close. I thought it might be the wrong idler arm but I’m not sure....

So I’m looking to swap out my idler arm on my 68 dart due to age and some minor contact with the header. I order up a 68 and it’s way different from the one on my car. Did the previous owner run a 73 and later one? My original one is a top mount and the new one looks like a bottom mount.

Hey all, anyone have a decent looking and working gauge for sale? Thanks.

318 engine -Performer RPM manifold -750 Holley mechanical secondaries -Camshaft Advertised Duration (Int/Exh): 290/290 Duration @ .050 (Int/Exh): 240/240 Gross Valve Lift (Int/Exh): .520/.520 LSA/ICL: 106/102 Valve Lash (Int/Exh): Hyd/Hyd RPM Range: 3300-6600 Includes: Cam & Lifters (#71977-16)...

Anyone have one in decent condition? Thanks.

Hey all, looking for 4 c10 bolts. Thanks.

Hey all, I’m back into another dart. Picked this one up with lots done already. I’m in the processs of freshening up all the suspension and brite work. Bumpers, door handles interior soft goods etc.. 318 car with a 46RE tranny, mini tub 9” rear with gears and a posi. Fun little ride and...

Anyone have one laying around that I can take off your hands!

Hey all, I have a new in box kit. Bought for a project that fell through. Never ran or even mocked up, just opened all up to take a look at everything.$1200 Located in95123. Thanks for looking Tom

Hey all, my buddy got a k frame with the purchase of a barracuda. The guy said it was a hemi k a body k frame. Not sure if I believe that one, I'm not keen on what to verify. Can any gurus help me out. Thanks. Tom

Hey all, I have a solid numbers matching 66 coronet project/driver for sale. Original yellow car, now in y2k primer, only minor dents. Lots of new parts and all it needs is some paint and body work. No rust and I just had a headliner installed. Car is located in 95125 Thanks. $13,000 obo

Hey all, I dropped a 600 dp on my 273. I think the secondaries are a tad to big for it. Runs great off the primary which are 66's. But rolling into the throttle it seems to big and I get a raw fuel smell after. The secondaries are 72's and the carb is all tuned out with a vacuum gauge so I know...

So as the title says, I was going to put some headers on my dart but decided not to. The Hookers are used, but in pretty good shape. They have been clearenced at some points on the primary tubes, nothing to drastic. I have a fresh coat of VHT header paint on them. The aluminum gaskets are...

Some have some good size cracks in my dash and was looking at this as an option. I have seen another dart with one and it was pretty good looking. Not sure how the green would match up though...anyone know the name of the factory green interior option? Thanks.

So I am trying to decide what to run. It has a 2" single on there right now. The motor has been rebuilt to a little over factory some years ago. Not sure what all has been done(second owner and all). But I want to open it up some drone the manifolds, with that said what should I run. I am...

Well as it says I am debating throwing some headers on. I picked up some hooker comp headers for my 68 with a 273. They were a steal but looking at the install I am debating on just running true duals from the manifolds. What to you all think, worth the time and skinned knuckles? The motor...

Hey all I have a good running rebuilt 2 barrel Carter BBD ser# 0-2378. It came off my 68 Dart, selling because I did a 4 barrel swap. Looking for 120 obo. Thanks. Tom

So I picked up an ld4b for my 68 but low and behold my bolt holes don't line up leading me to believe that it's for an early model 273. Anyway to find out for sure? Thanks.

Hey fellas I am looking for a good 4 barrel upgrade for my puny single barrel manifold. I got this streetmaster to throw on, I know the ld4b is top notch but they are hard to acquire. My motor is a stocker just looking for a little more pep will this do the job? Thanks.

As the title says will all of the drive train and suspension swap on my 68. I found a 66 that have a warmed over 360 and a 4 speed with other suspension goodies and the whole car is less then all the parts installed, so it go me wondering.... Thanks all.

Hey guys I have just got a 68 dart with a 273 and I have been trying to find manifolds but have come up really empty which is stumping me. I have been trying to do some research and supposedly the 318 manifolds bolt on to the 273 but not earlier 273's?? So my 68 is safe to swap a 318 onto it...

Hey all I am looking at putting this system on my 68. It seems pretty legit for a good overall system to start with and build off of. What do you guys think? Thanks.

Hey all I just picked up a 68 dart 270 with a 273. It is a clean runner and I am the second owner as it was in his family since 71! Motor and tranny have been rebuilt, upolhstry done, and much more. I will get some pics up when I pick her up on thurs. Well I am looking for the good and bad with...