Search results for query: *

A matching pair of 915 casting 2.02 340 heads and an Edelbrock Torker ll intake. All have stock ports (no guru's hacked on them). Heads were removed many years ago from a 340 and stored. $475 for all. Can bring to Mopars in the park May 30th or pickup central Wis Thanks FABO

On Sunday I posted/replied that I would purchase the Edelbrock AVS posted by Slantsix64 No response or reply Followed with a PM requesting preferred payment method again no response Tonight I received a dear John reply that the carb was sold There were no prior purchase commitments...

Looking for a pair of 273 solid cam style rocker arms in very good condition That means no worn or galled/grooved valve contact pads Already have those! Thanks FABO!

1967 casting dated code 273 block. .030 over and will build as such. I got this years ago as a long block as I wanted the 920 heads and rocker gear. It had a spun rod bearing so I parted the rods/pistons. Still have the steel crank put you better be desperate for one..... Block is free in...

Sold pending Auto column shift arm. Turn signal level and a green arm rest and base from a 68 Barracuda I parted many years ago $20 for all parts + whatever the actual shipping costs are to you. Thanks FABO

Excellent condition Hurst chrome manual trans floor shift handle with T -handle. Bolt on style. $110 to your door lower 48 Thanks FABO

Big or small block adaptable. $14 to your door lower 48 Thanks FABO

New in packaging. Magnum intake throttle bracket. $42 to your door lower 48. No longer available from Mopar. Thanks FABO

MSD 6200 6A ignition box and a pack of rev limit modules (missing the 6200 chip) $85 to your door lower 48 Thanks FABO!

Holley list 7855 carburetor. This is the Holley direct replacement carb for mopar Thermoquad and Rochester Quadrajet carbs. Was on my running/driving 1979 W200 I recently bought. I rebuilt the original Thermoquad and put it back on the truck for originality Comes with a new high quality...

Been in my storage garage Comes with a rebuild kit and banjo inlet $90 to your door for all Thanks FABO

Sold

Used but very nice parts: Check online prices 1) Distributor/oil pump drive shaft $20 + actual shipping ($60-$70 online ) 2) Clean set of rocker shaft hold down/rocker spacers $25 + actual shipping ($70 online) pics to follow Can fit either or both into a $10.20 USPS flat rate box Thanks FABO!

sold Pending to Mopar69 Nice condition Edelbrock SP2P 4 barrel aluminum intake $90 shipped lower 48 Thanks FABO

No longer available Mopar Performance P4886850 magnum style intake throttle bracket. New in packaging $60 mailed flat rate lower 48 PayPal FF or postal money orders Thank you FABO!

Looking for a pulley set for small block Non-AC power steering. Exactly as pictured Thanks FABO

Sold pending Just removed from a motor home 27,000 original miles Complete running engine. $650. Central Wisconsin

Looking for the EGR delay wire harness for my 79 W200 360 4bbl This harness has the oil pressure sensor, EGR vacuum module and choke control resistor connections. Believe 1980 is same Thanks!

Full set like new Isky 1.5 rocker arms, spacer springs and shaft hold downs w/bolts $200 shipped lower 48 Thanks FABO!

Garage cleaning time: Set of 8 340 rods Set of 8 273 rods. $48 for both sets to your door PP family/friends or postal money order Thanks FABO

Need an A-body floor hump for manual trans conversion (67-74 style) and the ball stud reinforcement bracket (pic below). The bracket should be on any manual trans A-body /6 3 speed ect... Thanks FABO

For sale is a 1975 dated 440 engine removed from a motorhome last weekend. Motorhome was driven to the spot we removed the engine. Complete air cleaner to oil pan. Pics will be posted in the morning. Located in central Wis $650 Thanks FABO

For sale: Complete small block 4 speed setup for 71-up B-body and E-body cars. I purchased this years ago to install into a project that never happened. Was told it was removed from a 340 Cuda that was turned into an automatic and a drag car. What I have is: B/E 4 speed A833 transmission with...

I have a 67 dated 273 block that is .030 and nice condition pair the famous and desired "920" closed chamber heads a steel crankshaft that needs turned but rings nicely nice condition dampner original oil pan $100 picked up in Central Wis Not interested in any shipping sorry Thanks FABO

1973 casting 360 engine Removed from a low mile Dodge motor home Had rebuild heads installed and never started after that Older couple owned for a long time Central Wis you pickup or make arrangements I have a lift $275 Thanks FABO

An early dated Edelbrock Performer Plus cam/lister kit for SB mopars. With everyone scared of lifters made in the last few years, here is your chance to get into a good vintage setup. $200 plus actual shipping to your address. Thanks FABO

A very nice set of 273 adjustable rocker shaft assemblies and matching solid cam push rods. As you can see the pads are very nice and not worn or galled. $160 plus shipping cost to your address. I have a Comp 270 solid cam and lifters listed and would a great package deal price for all Thanks...

Sold

For sale: small block Mopar: new in box Comp Magnum 270 solid cam 224 duration .264 lift and a NOS set of Direct Connection solid lifters. Part #2843177. $200 shipped to lower 48. I probably have a set of 273 solid pushrods for an extra $25 if you need. Thanks FABO .

For sale a new in box vintage Edelbrock SP2P intake in original box little beat up but hey it's all date coded 12/1978!! $185 plus actual shipping to your address lower 48 AK and HI I'll work with you if needed If needed I can include a FelPro intake gasket for $10 extra Thanks FABO!!!