Search results for query: *

I need a pair of vinyl top drip rail moldings for my 71 Demon. These are a little wider than the non-vinyl top cars. The correct ones have a green marker line in the inside of the molding. Thanks, Eric

Hey folks, I'm restoring a 68 Formula S with a matching number 340. I'm in Austin, Texas and am looking for a dependable and experienced shop to rebuild it. Any recommendations? Thanks, Eric

I'm wanting to add a vinyl roof to my 71 Demon that didn't originally have one. So, it lacks the metal pins that attaches the plastic clips for the mouldings. I have the metal pins that I can attach with my pin spot welder, but what I need is a template so I place the pins correctly. Anyone...

Hello A body folks, I'm new to tricking out Mopars and I wanted to get some technical advice from ya. I heard on a Nick's Garage Youtube video that you can stroke out a 383 by putting a 440 crank and cam in it. Is that true? If so, what are the specs for the crank and cam I would need to get...

I'm looking for the internal pieces of the lighter/ashtray assembly for an A-body console.

So I'm rebuilding the 8 3/4 sure grip rear axle on my 68 Barracuda. I'm upgrading to 4.5 inch lug bolt spacing and have to replace the original 4 inch spacing rear axles. The guy working on my rear end says he can't get 4.5 lugs on new axles for A bodies but can get B body axles to fit. Do I...

Started the body and paint on my fully documented Formula S coupe. Matching number drivetrain 340 4sp console car with deluxe interior. I have the window sticker and the build sheet. Soon it will be time for assembly.

Hey you A-body Barracuda fans - I'm restoring a 68 Barracuda formula S 340 and am replacing the rear leaf springs. I want to put some 8-inch rims on the back with 15 inch tires. Was wondering what kind of springs and shackles I should get to give it that modest lift in the back to clear the...

I need an automatic console for my 68 cuda. Would like shifter, linkage, and top plates if you have those as well. Eric

Looking for a nice set of 340 S hood inserts for a 1968 Barracuda. Will pay good money for a nice set. Eric

This question is for all those engine techies out there. Here's the situation. I bought a balanced rotating assembly for a 340 that has KB243+30 pistons. I'm looking at purchasing a block that has been bored +30 over and the guy I'm looking at buying it from thinks that the block was bored...

If I was stranded on Gilligan's Island, I'd be making out with Mary Ann. You Ginger guys can have her. How many of you are Mary Ann guys as well? RIP Dawn Wells. I guess I should also be PC and ask you ladies on the site the same question.

Question to the gurus. Will a 70-71 B/E Body aluminum big block bellhousing (513 casting number) be a direct swap for an A body big block car. In other words, can I still use the factory BB a-body Z bar and linkage set up without having to modify anything? Thanks Eric

I have two parts cars, ones a 67 with a 225/6 and the other is a 68 318 small block car. The wiper motor on the 67 is configured like a later abody 3 speed wiper motor with the motor unit aligned roughly parallel with the firewall (see attached pic). The car I'm building is a 68 car that I'm...

Happy holidays all! I'm needing a few parts to complete my quest for the ultimate 68 a-body barracuda. Here they are: (1) Big block bellhousing (10.5 inch flywheel) (2) 4 speed console body (3) 4 speed hurst console shift handle (4) 3 sp wiper motor (5) Rallye woodgrain steering wheel (6)...

Hi Folks, Question. I'm considering putting a 6-pack on my 383. Will the 440 six pack set up and stock 440 oval air cleaner fir? Thanks Eric

Thinking about putting a six pack on my 68 383 barracuda. If I use the repop six pack oval air cleaner, will all this fit under a 68 stock hood? thanks

Thinking about putting a six pack on my 68 383 barracuda. If I use the repop six pack oval air cleaner, will all this fit under a 68 stock hood? thanks

Hi All, This might be a dumb question to ask, but are all steering columns the same length regardless of whether they are power verses manual steering? Thanks, Eric

Looking for a good rebuildable or rebuilt 383 HP long or short block engine for my 68 Notchback, Prefer one that is in Texas, as I don't want to pay mega$$$ in shipping.

Does anyone know where I can get a white shift handle knob for a 68 Inland 4sp shifter?

I have two 904 automatic transmissions for sale. One out of a 67 Barracuda with a 225 /6. The other is out of a 68 Barracuda that used to have a 318. I'm near Austin, Tx. Make me an offer.

225 ci slant 6 out of a 67 Barracuda notchback. All pullies and brackets go with it. Will sell engine separate or the 904 tranny can go with it. Make offer. Car is located outside of Austin, Tx.

Looking for a solid 67-69 barracuda fastback to restore. I will go ahead and lay out my ideal preferences and we can start from there, but none of these are considered to be "must haves". Would like car to have nice metal but expect rust to be in the usual places (i.e. lower quarter panels...

Anybody out there have a 69 or 70 Road Runner solid project they would like to move? I prefer a 383 4sp car with vinyl top. I have a 68 barracuda coupe project that I would consider trading. I'm in Texas. PM me. Eric

I have an Inland 4sp shifter for a console that I'd like to trade for a Hurst version. Any interest?

Several years ago I bought a 68 cuda notchback to restore. But after I stripped down the quarters of all the bondo, it looked like someone took a ballpeen hammer to them all down both sides. Now I'm looking for a 2nd gen barracuda notch with good quarters that haven't been hammered and without...

Just stripped the bondo off a hood that I bought several weeks ago and I felt like a surfer when I saw all the waves. Anyone in Texas has a nice 70-72 Dart hood they want to sell?

I'm just thinking, but will the hood off of a 73-75 Dart fit a 69 cuda?

Looking for a 69 b'cuda notchback to restore. Prefer something near Texas, but will consider something nearby. PM me to let me know what you got. Thanks