Search results for query: *

  • Users: 540slant6
  • Content: Threads
  • Order by date
  1. 540slant6

    [WANTED] 2.02 Intake Valve for X-Heads

    Gents, I need one stock 2.02 intake valve for my X-heads. I'll buy a whole set if necessary. Thanks for any help. Nick
  2. 540slant6

    [FOR SALE] Refresh 318 Engine Package

    Selling a refreshed 70's 318 with new Sealed Power rod and main bearings with Hastings rings. All stock spec replacement, engine was pulled from a running 78 D100. New cam bearings as well. Did a ball hone on the cylinders and everything looks good. Package includes the following: Refresh...
  3. 540slant6

    [FOR SALE] 318/360 Magnum Valve Covers

    These are 100% stock less the Mopar Breather that's included. Worked great on my built 318 with a Mag head swap. Asking $80.00 plus shipping from VA 20180. Open to offers. Thanks Nick
  4. 540slant6

    [FOR SALE] 318 S.P. Edelbrock Intake and Square Bore Adapter

    Selling my small port aluminum Edelbrock four barrel intake. Fits Mopar small block and comes with a spreadbore to squareborw adapter (New) . Manifold is in great shape and perfect for a mild 318 build. Asking $90.00 plus shipping from VA zipcode 20180. It's unported and I'm open to offers...
  5. 540slant6

    [FOR SALE] 340 Rebuilt Short Block

    Selling my rebuilt 340 short block, it’s an .020 overbore with Sealed Power 428B cast pins pistons. All new freeze plugs and distributor bushing. Main and cam bearings are new as well. The rotating assembly was balanced (cast crank) and it’s a stock stroke. Has the main bolts for a windage...
  6. 540slant6

    [FOR SALE] 2010 Charger R/T Premium

    2010 Dodge Charger R/T Premium Package. Cas currently has 180-K miles but I drive it every day. List of upgrades are as follows. SLP Loud Mouth Exhaust, up to manifolds. Super aggressive sound! Not the car for you if you don’t like it loud. Speed Form Throttle Controller (super enhances...
  7. 540slant6

    [SOLD] Carter AVS Carb - 340

    Selling a Carter AVS with factory choke that sits in intake well. Was rebuilt and in great condition, just don't have a need for it. The numbers state that it is correct for a 68 - 340 ci engine. I'm not an expert but that's what I was told and seems to jive with the good O'l interweb...
  8. 540slant6

    [SOLD] Small Bolt Rallye Wheel Set

    Full set of 14" small bolt rallye wheels with SS trim rings and center caps. Nice driver quality set, all you need are lug nuts. Asking $250.00 and pick up in VA 20180. Thanks Nick
  9. 540slant6

    The 72 D100 Dog.....

    I know it's not an A Body but thought it would be interesting. I ran my ran my 72 D100 a few weeks ago in Mason Dixon MD. Specs. Stock bottom end 318 Double timing chain Stock magnum head conversion .441 summit cam w/268 duration Generic aluminum mid rise air gap 570 CFM Brawler 4 barrel...
  10. 540slant6

    [WANTED] Stock Magnum Valve Covers

    Looking for a stock set of magnum 318/360 valve covers for my LA converted to mag heads. It seems crazy that I can't find a set, any help is much appreciated. Thank you much, Nick
  11. 540slant6

    [FOR SALE] 78 D100 Short Box

    Hi Gents, Selling my slanty three on the tree D100. Asking $3,000.00 OBO. Runs and drives, full Facebook listing below. Manual disk brakes, manual steering, 8-1/4 rear end with the A230 three speed manual. Located in Lovettsville VA.
  12. 540slant6

    Magnum Head Valve Springs?

    I'm finishing my magnum head conversion on my 318 LA block. Running a baseline .441 cam which should net theoretical lift of .470 with stock mag 1.6 rocker setup. I need recommendations for valve springs. Thanks! Nick
  13. 540slant6

    [SOLD] LD 340 Intake

    Selling my Edelbrock LD340. Threads appear to be in good shape and no cracks. Asking $450.00 plus shipping. I will trade for a fresh set of SB heads ready to bolt on. Located in Northern VA.
  14. 540slant6

    [Found!] SB Mechanical Valve Gear

    Gents, I'm looking to swap my 360 from Hydraulic to Mechanical valve gear. So I'm looking for the shafts, rockers, etc. Thanks Nick
  15. 540slant6

    [FOR SALE] 87 Shelby Lancer

    Selling my Dodge Lancer Shelby. Car is No. 415 and has approximately $130-k. Clean VA title and inspected. It is a legitimate Shelby for a good price. Runs great and reliable. Just had a new clutch installed, TPS, IAC, plugs, wire, cap, coil, blow off valve, hatch struts and two new tires...
  16. 540slant6

    [SOLD] Small Block 340 Intakes (2)

    Gents, I have two late 60's / Early 70's cat iron four barrel intakes for sale. Both have identical casting numbers and are in great shape. Neither of them appear to.be modified in any way. Asking $50.00 each plus shipping but prefer pick up from Northern VA to avoid shipping cost. Will...
  17. 540slant6

    [SOLD] 340 X Heads w/Harland Rockers

    Selling a set of 340 X-Heads with a set of SB Harland Sharp hydraulic rockers. Asking $600.00 for everything plus shipping. I'm also open to offerd or trades for comparable parts. Thanks for looking Nick
  18. 540slant6

    [FOR SALE] Harland Sharb SB Rocker Clamps

    Complete set with rocker shims and hardware. Only used for about 3 months in my mild 360. Asking $75.00 shipping to lower 48. Open to offers and trades for other SB speed parts. Thanks Nick
  19. 540slant6

    [FOR SALE] Parts at Mason Dixon, MD Show

    Alright Folks, I'll have thr following parts for sale at the show next Sunday. All prices are negotiable or partial trades for PBR : ) Parts are pick up only, better deal for everyone not having to ship. Carb 1 - 625 CFM Edelbrock vacuum secondary - dirty but worked great on my 318. Asking...
  20. 540slant6

    Valve spring recommendation

    Gents, I have a mild 318 with stock heads - hydraulic gear. It's about 9.2:1 compression. I have a repop MP .444 lift 340 spec purple shaft cam. The car will probably max out a 6,000 RPM. I need a slightly stiffer spring for the cam and wanted some recommendations. I bought a great set of...
  21. 540slant6

    2016 Ram Express

    Gentlemen, just bought a 2016 Ram Express with the 5.7 Hemi. Surprised by the amount of power! The wheels totally suck so I'll be changing those soon. Also don't like it's a "RAM" instead of a Dodge.... Drives great even though it's on 35"s. Plenty of room for me and the girls. Sits...
  22. 540slant6

    [FOR SALE] Misc Parts Lot - $40

    As you may know, my 360 in my D100 is pretty much wasted so I need to create some revenue. Misc parts include: Dual feed carb line cut with fuel gauge adapter Small block upper manifold hose 360 graphic pie plate 14" Two (2) Centerline wheel centers (new) New ballast resistor Chrome MSD...
  23. 540slant6

    Fresh 360 Valve Train Noise.....

    Alright gents, I bought a fresh 360 rebuilt here from another FABO member. Approximately 10:1 compression with J heads and .484 cam. I'm running a brawler 670 CFM carb. Motor was running great and STRONG but has now developed some sort of valve train noise or clatter that starts around...
  24. 540slant6

    D100 Traction....

    Alright gents, I know it's not an A Body but there is a wealth of knowledge on this board. I need traction without axle wrap. I know Caltracs seems to be a star player but have you heard of guys mounting traction bars upside down on trucks for grip? I run a 3.90 in an 8-3/4 with a 2000 stall...
  25. 540slant6

    [FOR SALE] 318 Long Block

    Just pulled the 70 something 318 from my 72 D100. Ran fine, just wanted more power. Leaked some oil but super reliable and drove all the way to Mopar Nationals without any problems. Has Eddy Performer and DC chrome valve covers. Comes in the cradle that goes with the motor. I have video of...
  26. 540slant6

    [FOR SALE] Big Bolt Cragars

    Came on a 66 Charger my buddy bought. They appear be 14" x 5" and rears 7". They have all center caps and I have most of the lug nuts. Come with tires but no guarantees. Asking $100.00 and pick up from Lovettsville, VA Thanks Nick
  27. 540slant6

    [FOR SALE] 741 Case w/3.90 & Locker

    I'm selling my 741 case diff with 3.90 gears and a lock-rite locker. The locker is less than 6 months old and cost me $400.00 from summit. I have the receipt as well. Worked fine but had a little backlash play. Ratchet lockers literally "click" when turning so they are not quite. However...
  28. 540slant6

    [FOR SALE] Small bolt slots and axle shafts

    I do not want to ship either but can bring to the Nationals this weekend. The slot mags are 8" wide x 14" diameter. They are 4" small bolt pattern. Asking $60.00 for both. Axle shafts are small bolt A-body 8 - 3/4. Asking $80.00 Thanks for looking Nick
  29. 540slant6

    318 Breaking Up @ 4,500 RPM

    My 72 Dodge D-100 has a 317/727 combo with stock heads and an Eddy Performer - 625 CFM carb. The truck runs great below 4,500 RPM but the ignition starts breaking up around 4,500 at full throttle and it falls on its face. It also pops up the dipstick a hair when this happens. The truck has...
  30. 540slant6

    [SOLD] Holley Mech Double Pumper

    I bought a Vortech kit a while ago and it came with this Holley carb. One of the accelerator pump arms was broken in shipping. Stud was drilled out so a bolt will be needed to reattach. I don't know the history so selling as a core. Asking $100.00 plus shipping. Open to offers. Thanks guys.
Back
Top