Search results for query: *

Unfortunately not, I just went with the 545rfe with a transgo kit myself as it is what I already had.

Sorry about that, I meant the front control module, not the body control module!

I have researched this for months and have actually disassembled many harnesses as well as many hours looking through wiring schematics and have written my own schematics to disassemble and reassemble factory 04/05 truck harnesses. My research has shown that using the nag1, though not...

Thanks. I only use 04-05 pcm's myself......

Reply sent.

?!

HP Tuners.

I decided to upload this file to a server. You can download it from here: http://www.filedropper.com/hemiwiringpackets If you find these files helpful I would very much appreciate the feedback here. Chas

Just sent it again.....

I have a few truck ECM's and probably have a couple of harnesses as well if you need something let me know....

The car motor (year dependent) has all the same connections if I am not mistaken. I imagine you will be using a truck pcm if you are going 545rfe?

You're welcome. Basically all your wiring is in C1, C2, C3 & if it's automatic C4. The rest of the pages are just to show you exactly where to connect on the other ends. That also allows you the opportunity to double check your connections.......

It's a start, but compared to where I began it's day & night! Thanks for the reply

You forgot to include your email Riddler......

I have drawn up a fuse & relay wiring diagram, modified pdf's of the pinouts from the original FSM, and made a flash with the necessary changes made in HPT format. With this package you have everything you need (knowledge wise) to modify your 04/05 truck harness & PCM to use in any vehicle...

I tossed around many different options before finally deciding on the tried & true 1/2" black pipe with low point drains. I have an 80 gallon 2-stage compressor connected to a refrigerated drier & filters....so on....I run a CNC plasma as well as a sandblaster & air tools (not all at once) and...

I have drawn up a fuse & relay wiring diagram, modified pdf's of the pinouts from the original FSM, and made a flash with the necessary changes made in HPT format. With this package you have everything you need (knowledge wise) to modify your 04/05 truck harness & PCM to use in any vehicle. I...

Shadow9198 how is this project coming? Did you ever figure out your wiring?

If you look for my thread on the speed sensor you will find some information on the subject. I have received replies from both cu440da as well as Boden and can affirm that they are both very helpful individuals. Chas

Is it in the car now? I understand that the transmission tunnel requires extensive modification for the 545rfe. If you are at the wiring point I will tell you that unlike the LSx guys there is no website that is going to walk you through the harness. The 04/05 harness & PCM are the preferred...

KitCarlson thank you for your input. I am not against using a VSS signal, I am merely trying to figure out if one is necessary. From your reply it does sound as though it may not be necessary, it would make it simpler. My question now is whether the Jeep VSS signal...

Thank you cu440da! That definitely tells me the PCM (at least yours from Hotwire) does not use the VSS signal. I appreciate it. I will keep this thread updated on what I find. I started a thread on FBBO also, but it yielded no usable replies. Chas

That makes sense! There are some settings that I can play with for TM in the PCM and I may do that if I find it necessary. I think I will just go without a VSS wire for now as I have other options available for my speedometer. I have C4 completely removed from the harness at this point, as well...

Thanks for the input guys. This is exactly what I'm looking for. I have heard of issues with cars stalling when coming to a stop, but I also know, as co440da says, the C4 (green) plug is nonexistent on the standard shift vehicles. C4 is actually the transmission part of the PCM and that is where...

Obviously I'm new here, however I am far from new to the scene. I am actually in the process of installing an 04 Ram 5.7 into a Jeep YJ. I am going to build/modify the factory harness myself. I have already identified all of the needed pinouts with the FSM. I am using an AX15 connected through a...