Search results for query: *

  • Users: tnts72
  • Content: Threads
  • Order by date
  1. tnts72

    [FOR SALE] Mufflers and Small bolt pattern steel wheels

    Pair of 2" glasspaks removed from our 72 - not real loud like typical glasspak sound - pretty mild sounding with turndowns. $60 + shipping Pair of 14" steel wheels with tires - not sure on the rim widths - pulled them off our 72 when I converted it to large bolt pattern disc brakes. $50 would...
  2. tnts72

    [FOR SALE] 72 Marker lights / Roof Trim

    *Warning* Lot of pictures! I have a set of marker lights that need a little work - removed from our 72 when I shaved the markers. - See the pictures $20 Rear bumper 72 Duster - straight but rusty. Needs blasted and powder coated or re-chromed $50 Stainless roof trim - not the full vinyl...
  3. tnts72

    [FOR SALE] Duster Dash Parts

    I have a few pieces left from a dash cluster I parted out. All of these are clean - from a nice working cluster. Temperature Gauge $35 Ammeter $35 Dash Frame $30 Prices do not include the ride to you. Included a picture of the cluster before it was parted out, gauges are nice - not faded...
  4. tnts72

    [WANTED] Holley 650-750 Double Pumper

    Looking for a carburetor for a customer, rebuildable unit is fine or one recently removed. Must be electric choke and accept PayPal. Thank you Fabo folks
  5. tnts72

    [Found!] White MSD 5000 RPM pill wanted

    Need to find a 5K rpm pill for the Duster, all mine are higher 6-7K rpm range, just so happens the 727 shifts at 5K when you leave it in drive. Would gladly trade someone if they have a 5K not in use... Buying a full pack or a $10 single off ebay is about the only other option. Needing it for...
  6. tnts72

    What mechanical fuel pumps are you guys running?

    I currently have a stock replacement on the 318, nothing serious planned for it, but the old pump threaded fitting was pretty rusted up and one of the legs looks like it could become and issue down the road. If I replace it I would like to have a standard style cast bottom vs the stamped steel...
  7. tnts72

    Looking at a couple 360's this weekend - tips?

    Might be making a 7 hour road trip this weekend to look at two 73 360 engines. One 73 is torn down, but complete and one is still assembled, it sat for about 3 years and was just removed. It's supposed to have 65k miles on it out of a minni winnebego. Haven't done any Mopar engines yet, have...
  8. tnts72

    Derale 727 pan ground clearance question?

    Anyone on here running one? I am looking at a finned aluminum vs the derale. I don't like that the derale looks like it's 4-5" deep!! Figured I would ask here before placing the order. Wish they made one about 3" deep vs the lowboy, really like the derale pan on the turbo 350 in my racecar.
  9. tnts72

    [SOLD] 70 Duster / Valiant Grille Emblem

    Looking for an emblem for this 72 grille, pretty sure the mounting pins are the same 70-72. Let me know if you have one lying around. Picture for reference.
  10. tnts72

    Presidential Candidate Memes

    Let's not argue politics with one another, just post the best memes you can find. Enjoy, leave the political BH at the door in this thread...
  11. tnts72

    Not a CL find, but just as bad

    Car started off at 5k... Now it's a bargain at 3k, wow!
  12. tnts72

    Driveshaft loops?

    Anyone build loops for Dusters that would bolt into the subframe connectors? Thinking about building one myself, just looking for ideas... I am not interested in the bolt together variety.
  13. tnts72

    [FOR SALE] 1972 Duster Dash Cluster / Markers

    I have a dash cluster removed from a 72 Duster, complete minus the faceplate - I used it in my autometer conversion. Cluster appeared to work fine when I drove it all of about a mile before loading the car on my trailer, can't guarantee you wont have to replace a few bulbs... All the gauges...
  14. tnts72

    [FOR SALE] Duster Parts - Power Steering / Dana 60 axles / U bolts

    Have a power steering pump / box / mounting brackets - can include a pitman arm, but it is the top down version which came on my manual box. Power box had a little slop, probably would need rebuilt if someone wanted to put it back into service. Pump worked fine, no noises or leaks - does have...
  15. tnts72

    [FOR SALE] 1972? Duster Fenders - 1/4 skins and rear bumper core

    1972 Duster Fenders, drivers side is a 72. Passenger side is an unknown conversion to a 72. I would describe both as rough, but useable if someone wanted to put some time into them. Removed from a project car. $100 come and get them - probably not worth shipping. 1/4 skin left overs are...
  16. tnts72

    [FOR SALE] 9" sbp drums / control arms / ps / fenders / 14" wheels / trim / bumper

    73+ b body brake calipers new, with new hoses, new pads, $100 shipped. 72 Duster gauges, everything but the faceplate, all appreared to work fine before removed and in nice shape. Removed all the plastic shields / cardboard tubes and light covers. Original metal housing and circuit board also...
  17. tnts72

    Horn Relay Replacement

    Getting some first rate help from local parts stores on a replacement relay for this Duster. I am needing a horn relay for a 72, I ran through some troubleshooting - all of which led me to the relay being bad. Ended up opening up the old relay to confirm my findings and sure enough, wire...
  18. tnts72

    [WANTED] 1 Jegs Polished Sport Drag Front Rim

    Long story short Jegs sent me 3 5 on 4.5" pattern rims and one was misboxed and its actually a 5 on 4.75" pattern. Rims are discontinued and I am having a difficult time finding a comparable piece from any other manufacturer... Anyone happen to have one or two collecting dust...? Otherwise I...
  19. tnts72

    Pin on calipers vs 72 Duster lower control arms

    Wondering if I didn't get the wrong calipers compliments of Rock Auto. As you can see in the pictures the lower section of the caliper is contacting the ear of the control arm by the lower shock mount when turning left. I would rather get them swapped out for the correct ones vs cutting an tab...
  20. tnts72

    [FOR SALE] Plymouth Duster left over parts

    I have all this stuff listed on my local CL, just figured I would share it here if these parts may help out some fellow board members. Prices are in the CL add and obo, will deal / ship at buyers expense. If this isn't allowed please remove it. http://mattoon.craigslist.org/pts/5279852690.html
  21. tnts72

    Rear U bolt ?'s

    Anyone know of a good place to find replacement U bolts? Going from a 7.25 to a Dana 60, would like to find a set of factory style replacements with the flattened section in the rounded portion of the bolt... Anyone using the Square style of U bolts?? Looking at Mancini / Ebay right now...
  22. tnts72

    Carpet replacement questions

    Anyone ever buy from these guys? They will do a 1 piece 80/20 loop carpet for $130 shipped, seems like a pretty good deal - local shop quoted $900 to do carpet and installation :wack...
  23. tnts72

    Small block mopar price check

    Help me out on a value for these. 360 bare block / bare set of fully ported J castings. Leary of sinking too much $$$ in bare parts then spending 5-6k in finishing them up. Really only looking to build a 450hp mopar sb to run on the street. Thinking it may be much cheaper to find a complete...
  24. tnts72

    $50 CL find Holley valve covers

    Found these while on a little road trip to run a Tough Mudder this weekend. $50 on CL, should clean up nice
  25. tnts72

    Cubs / Cards fans...

    Too soon....?
  26. tnts72

    Fender marker patch repair

    So I bought this fender a month or so ago and I am finally getting a chance to work on it. What I have is a 70-71 fender that someone attempted a 72 conversion on. I have a couple questions... Option #1 Slighly recess the patch in the existing opening and weld it in from the backside. I figure...
  27. tnts72

    727 kickdown help

    So there is currently nothing installed on this Duster other than the lever arm on the transmission. I noticed the rpm flair up between 2nd and 3rd when driving it so I began researching, 727 must have kickdown linkage hooked up to function properly... Question is the thottle cable mount I...
  28. tnts72

    72 Duster Street / Strip Build

    So I picked up a 72 Duster 6 weeks ago now and it is about to depart from my garage in order to get the metal patchwork taken care of so I figured a post in the Restorations forum was due. So in the last 6 weeks I have been pouring over countless threads and asking quite a few of you several...
  29. tnts72

    A body - B body spindle swap

    http://www.hotrod.com/how-to/chassis-suspension/mopp-0503-swapping-a-and-b-disc-brake-spindles/ Anyone here running B or E body spindles on a 72 or earlier A body? I would like to put the 11.75 disk setup on the front of this 72 once I find some big ball joint upper control arms... Plenty of...
  30. tnts72

    Headed to the scrap yard for Duster parts

    Well I am headed to the scrap yard in search of some 10" x 2.5" or some 11" x 2" rear drums and possibly some front disc brakes / control arms from a 73 or newer Duster. Anyone need some odds and ends, owner of the yard is a bundler more you buy the better the deals get? Any other scrappers...
Back
Top