Search results for query: *

Is there a Gear Set for the Slant Six I'm asking for a friend, I've looked on the net with no successes Gears, no chain

Hello I should have posted here before I bought a Battery old down "kit" (Fits 74 and other years) The box came yesterday, I took it out to the car and the bracket fits the width of the battery, but the hold down rods are maybe 2" short. Also there seems to be only one hole on the engine...

My "friend" just left, he drives me nuts. He has a 1968 dodge dart with over 1,000,000,000 miles on it... Its in bad shape it was his Mothers car. To the point. the rear shock, upper mount is gone. It got loose and he took it over to a machine shop to make a new one, and they lost it.. He...

Hi all ( please don't ask why i want to know) hahaha OK, 74 dart 318, has a rebuilt carter BBd 2bbl it has sat for some time now.. the accelerator pump was not working I bought a rebuild kit, the kit had most of the correct parts, except for the "top" gasket and the "accelerator pump"...

To start I don't know all the nomenclature so here it goes. My 74 turns over easy. but does not start. I primed the carb and it fires then dies. I pulled the fuel line, and it is getting fuel. I pulled the that small cover in front the barrel, it seems this is the "power valve" Please...

I'm ready to install mufflers on my 74 Dart, 318 has anyone installed the Cherry Bomb glass pack ? any problems with running them? Where in the exhaust did you place them. there part No. 87507CB Best Dave

Hello everyone I have a couple of projects going on at the same time. One is my 74 Dart Swinger, the others are a 1956 Packard and a 62 stationwagon Have any of you done a retro fit Hydraulic roller? I'm not concerned about the cam, but the lifter dimensions and the push rod length Did you...

Hello all, hope everyone is doing well I have a 74 dart swinger. currently it has a pair of seats from a 95 courgar, which are getting a little worn. So I'm here looking for any info on what seats might fit. I prefer buckets with power what have others used On a second item, I'd...

the title says it, but right now I have no exhaust pipe. I believe the stock is 1 7\8, but I'd like to go 2" has anyone done this, and if so, what is needed if anything. Best Dave

Hi I see I have a leaking expansion plug Can anyone tell me where the block drain plug is? 74 318 I read that the expansion plugs are 1 5/8 can you confirm that.. just the side block expansion plugs. Best

Hello All I just wanted to share this "Rust" removal method I used yesterday on my 74 Dart The car had a vinyl roof which finally pulling up, showing rust under it.. I've had way to many projects and although I know when you see "Rust" you have to get on it ASAP, I did not, and the...

I'm sure someone knows if the 1974 Dodge Dart wiper blade was silver or blace metal I ordered a pair, and they just arrived. The are black metal Bought from Wiper Blades USA Best

Hi Does anyone have the correct size of the wiper blade on the 1974 Dodge dart? Anco lists about 6 sizes for their 20-15. SS wiper holder Best None of the "parts" store even carry Anco any longer.... times are a changing... (Bosh) ****... Duralast, rain X. I like Anco and Trico...

Hi all Getting along with my 74, think the NSS went out, or maybe one of my Raccoons went into the auto mechanic business without telling me... I'm looking for original wiper arms, well the "blade" holder.. Funny how when I was in crammer school they taught us that words matter, today I...

Hi Guys... Well maybe my 74 got the virus, it got somehting.. Last time I started it was about 2 or 3 weeks ago.. started right up.. usually does My friend came by with some of his tech tools (He is big Mopar guy) So before he showed up I put the charger on the car... just because...

Has anyone installed a Panhard Rod on a 1974 Dart? If you have, what make did you use, Best Dave

Hello All I came across something interesting about the exhaust manifold on my 74 Dart 318.. I'm doing some work on the engine, and decided to replace the exhaust I also took the exhaust manifolds off. Now the exhaust pipe had been cut off so when I pulled the manifold off the car, the...

Hi all Well I've come across an Item I'm not familiar with It called the "battery tray (Brace)" I came across this while looking for a battey "hold down" DMPS-6636-BTB4 Mopar 1963-1976 A-Body Battery Tray Brace - dantesparts.com I know my 74 does not have it, but can anyone tell me what...

I know this has been covered. I just read from the May 2018 posting I had found a Weiand 8007 Intake used close to me so I bought it... this was last year oh well be awhile since then I had a broken timing set, so installed new when I had the time the 74 Swinger would just not time right...

Ok, let me set this up... baring some stupid thing I did.. 74 Dart with automatic..Ok that is what this section is about. about 2 years ago, about 3\4 miles from my house, the timing gear took a vacation. I got a tow home and started taking about the front end.. I new that it was the time...

Hey all Does anyone have a site to buy the rear tail light bezel gaskets? Are any parts made for the rear tail lights? Best Dave

Hello So we all know how expensive cleaning fluids have become, paint striping, rust removal etc: Here are a few home made fluids that do a pretty good job, at a cheap price For parts you can remove from the car, use Lye, 1LB of crystal to 5gal water will remove grease, oil, and paint To...

Hello As some of you might know I have a 74 Dart swinger I have the usual broken pieces, A pillar covers, door panel plastic broken, inside door handle reveal broken or worn... I am thinking of having one of these parts scanned and then printed in 3D So for those of you who have a 74 Dart...

Hi all I'm sure some of you have installed the 360 intake onto their 318, any good advise, I have the correct set of gaskets, and the water outlet that is mentioned. Is there anything else? What about mounting the Air conditioning pump? Best

So this at one time was my Dad's car, he got it from some friends of his After he passed the car came to me, and I lent it out to my niece to use for High school When the car came back it had changed colors and top from black\white to white\ powder blue and of course her, her Mom or anyone...

Title pretty well says it all. the doors on the 74 are down a little at the back, (handle side) of door. beside the door hinges are there adjustment behind the door panel? Best Dave

Hi all I know this subject has been covered, and I did see one posting while I did a search on here yesterday, but something was wrong with his setup and engine. the posting was from way back in 2010. and a reply to his request included pictures like 4 of them, but I notice the head in...

Does anyone know where I can buy a pair of down pipes for my Dodge Dart 318ci but not using the factory location... they bent the **** out of the bend to get that pipe to fit..

Ok, I've read that the bolt for the harmonic balancer is suppose to be 135 lb one source a book the other the net.. Could someone who has done this, confirm that number and also how did you hold the engine from rotating... the bell housing on the Ford transmission are a little different then...

Hello Well I'm not angry that I don't know more then I do about the 74 Dart I have. 74 Dodge Dart Swinger... Little did I know that with each different trim there are some "major" differences... Like when I bought the front windshield gasket, turns out there are at least 3 different sizes...