Search results for query: *

  • Users: 65rbdodge
  • Content: Threads
  • Order by date
  1. 6

    Fuel pump

    I need some advice on selecting a fuel pump. I see Holley makes two fuel pumps for my vehicle. One that has a return and one that doesn’t. It’s a 2008 5.7 truck motor using the stock intake and injectors. It’s just a stock rebuild with a cam swap and Holley terminator x max
  2. 6

    46re rebuild kit

    I’m going to rebuild a 46re for a 5.7hemi swap, will be about 450hp in a 3000lb vehicle. It’s just a driver, no racing. I was wondering if I’d be ok with a stock kit from rock auto or should I go with a better kit with the red clutches. Anyone have experience with this?
  3. 6

    What is this tool?

  4. 6

    Intake manifold

    I’m at a crossroads deciding on an intake manifold. I rebuilt a 2008 5.7 truck motor, going in a 96 dakota. The only upgrades to the motor are a comp 268 cam and shorty headers. Using Holley terminator x max and 46re trans. For an intake im thinking of using a stock truck or the holley...
  5. 6

    Power steering pressures

    Sorry not an abody but I thought I’d ask-I’m putting an 08 5.7 into a 96 Dakota. Will the rack in the truck work with the pressure of the hemi pump?
  6. 6

    Donor car, what to pull off

    I just got a 2006 jeep commander with a 5.7 besides the motor what should I pull off this as far as electrical? I drove it home, $200 couldn’t pass that up.
  7. 6

    Spring locators

    I’m new to hemi’s, I’m putting a 5.7 together, working on the heads now I’m putting on comp springs 26918-16 I know I need the spring cups/locators 4709-16 do I need the spring seats 4705-16 too? The heads are at the machine shop and after I took the springs/retainers and seals they called and...
  8. 6

    [WANTED] OC performance intake manifold

    I’m looking for an OC Performance intake manifold for a gen3 hemi. Thanks
  9. 6

    Stabilizer bar

    I want to add a FRONT stabilizer bar to my 71 dart. It has a 73+ k frame, that’s been modified for a big block. Has 73+ disc brakes and upper control arms. I’m thinking I need the 73+ stabilizer bar but just want to confirm.
  10. 6

    Oil pickup to pan clearance

    On a 360 block, I have a canton 910 oil pan with matching pickup(901)my measurements give me 1.5” clearance. That way to much, what do I do to correct this? Bend the tube? It seems like a lot to bend to make it right
  11. 6

    Pilot bushing for scat crankshaft

    I just put together a 408” with a scat crankshaft, the only thing preventing me from putting it in the car is a pilot bushing, they are the on back order from summit and jegs. I called brewers and they don’t sell one that fits. It needs to be 1.094od x .752id it’s not the standard Mopar size on...
  12. 6

    Plugging air injection holes

    I’ve done it many times, tap it with 1/4-20 and put the a bolt or whatever I have in there. I have a set of 308 heads that were on a jasper motor, I tried the 1/4-20 tap and it slides right through the hole, like it’s been drilled out already. Can it be safely taken out to 5/16”?
  13. 6

    Comp ultra pro magnum rocker arms

    Does anyone know if these rockers can be oiled through the pushrod? I’m putting aftermarket LA heads on a magnum block. Thanks!
  14. 6

    Balancer

    Can you tell me if this is an LA or a magnum balancer? I bought a second hand jasper 360 with low miles(2000) it’s a 92 casting date, has LA timing cover, short snout roller cam, had factory TBI, 308 heads on it. I’m trying to find out if magnum or LA balance so I can get the correct flywheel...
  15. 6

    Engine storage

    I thought I would share the way I store engines. Cheap and easy 4 12” 4x4’s and 4 14” 2x4’s and some 3” screws I’ve doing it this way for years, I’m sure you have other ways of storing the too, let’s see them
  16. 6

    Wheel hop

    When I burn out I am getting wheel hop when I shift into 3 gear(manual valve body) 1-2 is smooth, as soon as I get in third it starts hopping. It had HD leaf springs and the stock pinion snubber on the 8.75 any ideas?
  17. 6

    [FOR SALE] 225 slant six

    FREE I have a 225 slant six it has been disassembled to the short block but I have all the parts. It did run but had low oil pressure and ran hot so it will need a rebuild. Located in N.E. PA about 20 minutes east of Scranton. FREE for pick up only will not ship
  18. 6

    [FOR SALE] SBP rallye wheels

    set of 4 small bolt pattern(4") rallye wheels 14"x5.5" will need cleaning/blasting center caps included, no broken bolts in center caps. would prefer not to ship will deliver to Chryslers at Carlisle for free. $300 PM me if interested located in N.E. PA
  19. 6

    69 a-body parts wanted

    looking for parts for 69 a-body - steering column for a 4 speed 4 speed clutch/brake pedals bucket seats w/head rests and tracks posting for a friend email him at- docwebby@verizon.net
  20. 6

    no mufflers?

    has anyone ever had a full exhaust system without any mufflers? i`m thinking about doing this with my 47 desoto w/318.
Back
Top