Search results for query: *

402 big block oil pan. This is a Chrysler pan and NOT a Chinese made unit. I'm including a windage tray in the deal. These parts are very clean and ready to use. $175.00 plus shipping from 06484.

Here are 2 timing lights and 1 set of cables. I think that the pick up is bad because regardless of which light is used, neither one works. These lights worked last year. Either way, I'm selling these as not working. $15.00 plus shipping for both lights and the cables from CT 06484.

This mini starter is being swapped out for the correct (restored) Chrysler starter. It was loaned to me from a friend who does not want it back. This mini starter is no longer needed. It has 870 miles on it. I want to point out that the sticker and the surrounding painted area appear to have...

This voltage regulator was used for 1 season. I no longer need it because I changed the electrical system. $10.00 plus the ride from 06484.

This 1969 Carter carb was on my 1968 340 because I had a very hard time finding a good used 4425. It runs perfectly but is obviously incorrect for my car. I finally found the correct Carter 4425 at Carlisle this year and this 4639SA is no longer needed. This carb is 100% complete and operates...

1968 340 valve covers. These pieces are in excellent condition for their age. They are straight and dent free. All the tabs are intact. Plug wire separators and PCV valve are included in the sale. $135.00 plus the ride from 06484

Here are 3 ballast resistors (2095501) that are in excellent condition. All 3 resistors have been tested with an ohm meter. All test at .7 ohms. All 3 brackets have the part number stamped on them but one is extremely faint. I needed a magnifying glass to see it but the number is there. The...

This is a really nice, original 614 fan shroud. It was pulled from a 68 Cuda 340. It is very clean and ready to install. $275.00 plus shipping from 06484.

These are a mint pair of front parking light lenses for a 68 Barracuda. These are original pieces with the Chrysler part numbers: Right side 2853496, Left side 2853497. I am advertising these as used pieces but I'm not seeing any indication that they were ever installed. $140.00 for the pair...

This is a new voltage regulator part number P3690732. I bought it awhile back "just in case" and I never needed it. $45.00 plus shipping from 06484.

This is a red 340 air cleaner pie pan. It is very clean and straight. Driver quality item. $25.00 plus the ride from 06484.

I have a really nice clean base for sale. Problem is I don't know what car it came from. I think it came from a 70 Duster but I'm not swearing to it. There is a small chance it could have even come from a B-body. If you know what it came from (see pics) and you want it, the price is $10.00...

I have 2 Cragar SS wheels that measure 14 x 7 with 5 on 4 (small) bolt pattern. The back-spacing is 2.5". The tires are BF Goodrich 245 60 R14 with 3,400 miles on them. The complete pkg is in excellent condition. Ready to install. The only reason I'm selling them is that I'm going in a...

Here is a clean base and lug wrench. I'm going to be honest, I'm not sure where these 2 items came from. They've been in my stash for many many years. I've only dealt with old Mopars my entire life so they are NOT Ford or GM items. $25.00 plus the ride from 06484. Paypal, personal check...

This is a vintage 6 amp battery charger. They do NOT make them like this anymore. The leads and the power wire are in very good condition. I plugged it in and tested it on my Barracuda's battery. It works perfectly. $35.00 plus the shipping from Shelton, CT 06484.

These are 4 steel (not plastic) wheels for a push lawn mower. Size is 8 x 1.75 with 1 3/8 offset and 1/2 ball bearing. They were never used or even mounted on a mower. All 4 are boxed up and ready to ship. $20.00 plus the ride from Shelton, CT 06484.

I have 2 Gulf gas station signs for sale that measure 6ft x 6ft. They are in really nice shape. They have a few scuffs but they are 100% free of cracks. Would look great in a large garage or shop. $950 for both signs. Local pick up only. Bring a full size pick up. Way too big to ship...

This is a very original 2863216 18" diameter fan. Ink markings are still present. Each blade is straight and the rivets are tight. Minor surface rust is present. The clutch looks to be an aftermarket unit. It spins with a nice, tight feel like a new one would. $95.00 plus shipping from...

Here we have a nice used 18.5 inch 2863 216 fan with the 070 clutch. This assembly is a very nice, clean and straight unit. All the blades are very tight where the rivets attach. Each blade has 2863 216 stamped in it along with the pentastar and 46237 marking. The clutch has a nice, tight...

This is a slightly used, very clean aluminum version of the 68/69 340 original cast intake. VERY VERY light. This manilfold will make your stock 340 engine look stock with about 40lbs less weight. The part number is 4532059. $300.00 plus the ride from 06484.

This is a VERY clean used ballast resistor that tests .07 ohms. 2095501 is the part number stamped on the bracket. $28.00 and free shipping to 50 states from 06484.

I have 2 used, very clean and operating ballast resistors. I tested both and they read .07 ohms on my meter. The porcelain on both are clean and free of chips and scratches. The brackets are nice and straight with the part number (2095501) being legible on both. $35.00 for the pair and I'll...

This is an NOS Mopar ballast resistor (NOT a repop). The part number is 2095501. It is for Mopars up to 1972. It has never been installed in a car. I tested the resistance with my meter and 0.6 ohms was the reading. The plating is very nice and the part number (2065501) is clearly marked...

A VERY rare find. This is an aluminum replica of the 68-69 340 cast iron intake manifold. The part number is 4532059. This light weight aluminum intake has never been used. It is brand new. Please look closely at the pics. You can see that the thermostat base, carb base and intake...

This is a set of four 14" Cragar SS wheels (small bolt pattern, 5 on 4 inch) with BF Goodrich radial T/A's. Two Cragars are 14x7 with 3" backspacing and the other two Cragars are 14x6. The tires only have 3k miles on them. 245 60 R14 on the rear and 205 70 R14 on the front. These were on my...

I bought this 904 trans dust cover from Year One many years ago (by mistake). I'm never going to use it because it doesn't fit anything I own. It is new. See pics. $70.00 plus the ride from Shelton CT 06484.

This is an original 68 340 harmonic balancer that was pulled from stock steel crank 340. It has 48,000 miles on it. The rubber is good and the crank seal surface is smooth (no groove). Just to be clear, this balancer came from 1968 340 where the timing marks are on the right side (passenger...

This is a set of 8 pistons from a 1968 340 Chrysler engine. They have 48,000 miles on them. They are factory standard bore size of 4.04. They are in very good condition. Wrist pins, 16 locks and rings (none are broken) are included in this listing. The only reason I removed them from my...

Here is a set of eight 340 connecting rods that came out of a running, stock 1968 340 engine. The part number is clearly marked on each rod. These rods are are in excellent condition. Please see pics. $195.00 and I'll even pay for the shipping from Shelton, CT.

I have 1 spare steel wheel that has a 4" bolt pattern. It is in very good condition. No bends or cracks. See pics. $15.00 plus the ride from Shelton CT 06484. Local pick up is also an option.