Search results for query: *

I have a good used manual steering box from my 1967 Barracuda. Worked fine, I just replaced with a quick ratio box 5-6 years ago when I rebuilt the suspension and steering. Asking 40.00 plus actual shipping from 80534.

I have a nice Mr. Gasket degree wheel p/n 1570 only used a couple of times. New they are 46.00 Asking 30.00 plus actual shipping from 80534

I have a very nice Comp cams degree wheel. It is 9” dia. P/n 4790 CPG Asking 22.00 plus actual shipping from 80534.

Preform o/n 67442 crankshaft turning nut. Great for engine building Asking 15.00 plus actual shipping from 80534

I have a Radio Shack traffic light p/n 42-3053. Great garage art. The lights blink on and off. Dimensions are approximately 19”x7”x6” for shipping and weighs about 2 lbs. asking 20.00 OBO plus actual shipping from 80534

I have a very nice 1962-67 super 225 Unsilenced air cleaner from my 1967 Barracuda. It’s in great shape. Restored ones are listed for 229.00 and out of stock here. 1962-67 MOPAR SUPER 225 SLANT SIX UNSILENCED AIR CLEANER OEM Asking 80.00 OBO plus actual shipping from 80534.

I have a Holley aluminum heat shield and 1/2” phenolic spacer for 4 barrel carbs. Works great in hot environments. I bent it slightly to give additional clearance for coolant hose. Could be straightened, trimmed or left as is. Holley p/n 108-70 new at Summit Racing is 46.00 plus tax ect...

I have a set of classic look 7 inch led headlights I need to move out of my garage and into yours. These are for a two-light system ( high and low beam ). One light does have a crack in the glass lens, it doesn't leak water in when I wash the car. It does work fine. I just noticed it was...

I have a nice center section that was rebuilt and ran in a big block b body car for 12 1/4 mile runs. It is a 741 case, cone-type sure grip. Small u-joint Speedmaster shipping container included ( 60.00 from Speedmaster) which measures 20"x14"x13" approx. weight is 75 lbs. for shipping...

I have a nice pair of A body 8 3/4 OEM sbp axles off a running 1969 A Body. Only removed to change to bbp. The left-hand studs have been replaced with right-hand studs. Asking 140.00 plus actual shipping from 80534 will discount if purchased with drum brake set in another post. Edit for...

I have a nice 8 3/4 A Body brake setup off a 1969 A Body 10 x 1 3/4 Drums, backing plates, and most of the hardware is included. This was taken off a running car that went to bbp. I don't have a drum mic. but drums look like they are 10" and could be cleaned up and run or a light cut is all...

This guy, @fastnos is one of them. He saw a message I posted about sheet metal valve covers. So he has the nerve to pm me about some he has had from forever sitting in his garage never used. I said OK, let me know what you are thinking you would want for them. I sent him my phone number so he...

Looking for input on the early Hemi valve covers. Are they desirable, easy, or hard to find in good shape? I have a neighbor who has a set he is looking to sell. I told him I would do a little research for him. Thanks in advance.

I have a nice restored pass-side headlight trim for a '67 Barracuda. There is some minor pitting on the chrome around the headlight but is not seen once installed. I purchased it here and decided to keep the one on my car. I've seen posts stating they will fit a '68, just one extra fastener hole...

I have a pair of 1969 Barracuda taillights for sale. They are driver condition I would grade them a 6-7 out of 10. There is small pitting on the chrome and some imperfections in the lenses. But overall for their age, they are decent. The mounting studs are in great shape. I’ve tried to show...

I have a NIB Ryanstar racing throttle cable bracket I bought and never used. One spring is missing. Asking 25.00 shipped from 80534 to continental US.

I have a nice set of either late 69 or early 70’s valve covers. Includes breather and pcv valve. Wire separators and cap. They are media blasted and ready for paint. Asking 125 plus actual shipping from 80534 edit found my receipt when I bought these. price changed to 125.00 trying not to...

I have a nice small block oil pan #394 for sale. Fits 318-340. No dents, nice shape. Media blasted and ready for paint. Asking 50.00 plus actual shipping from 80534.

I have a new set of Hastings rings for a LA 360 +.030. Part number 2M139030 I had to go .040 on a build a few years ago so I can’t use these. Asking 30.00 shipped from 80534 Summit racing is approximately 50.00 Hastings Piston Rings 2M139030 Hastings Piston Ring Sets | Summit Racing 1st and...

I have a Federal power steering pump casting number 2537955 that I got with some other parts years ago. I believe it is good. Clean inside and spins fine. Associated pulleys and brackets included. Offered for free if you pay for shipping from 80534.

I have a couple engine lift plates to sell. Asking 20 each shipped from 80534 To anywhere in the continental US.

I have a Sunex upper ball joint socket that is 3/4" Drive. 1 59/64” used for two ball joints This is for the large upper ball joints for disc brakes. Asking 20 shipped from 80534 in the continental US.

posting for a friend He said it’s an A-Body axle Call him directly https://m.facebook.com/groups/150206615513963/

I have a very nice complete six-pack setup for sale. The carbs have been rebuilt, including new diaphragms. The fuel lines and linkage are complete. I have a spring kit for the vacuum pods. I did save all the old components for the carbs that were replaced. This includes the air cleaner...

I have a new-in-box UEM Icon premium forged piston kit for a 416 stroker. ( +.030 340 ). This includes the pistons, pins, and rings. I had to go another .010 (+.040 ) with my engine so I purchased another set. Piston p/n IC744.070 , rings 4000BD8.070 Normal retail is 843 +/- plus tax ect...

I have a nice adjustable pinion snubber for sale. Asking 40.00 plus actual shipping from 80534.

I have a nice 489 case 3.23:1 dated 1972 cone-type sure-grip center section for sale. I have been running this in my car for the last several years with zero issues. The only reason I'm selling it is I've decided to stick with the 3.55's I have. I am listing the adjustable pinion snubber...

I have two sets of 8 3/4 shock mounts (plates). The threads are in good shape. One set is painted black and the other set is bare. Both are in great shape with no pitting. Asking 100.00 / set plus actual shipping from 80534

I have lbp Mopar Ralley wheel center caps for sale. The set of 4 is 100 plus actual shipping (pirate ship rates ). The others are 20/ea plus shipping from 80534.

Two oem A Body axles in good shape. They had some surface rust that cleaned up with a wire brush and some minor pitting. Splines and studs are in good shape. L/H studs still in one. Each axle weighs approximately 15 pounds. Shipping for both will be about 40.00 depending on zip code. Asking...