Search results for query: *

Looks like an electric pump is next. any tips on the flow rate for a lightly modified 6?

i tried this and the result was the same little to no flow, i even took the pump off and reinstalled still no better, So it looks like the electric is my next move. Any tips on the flow rate for a lightly modified 6?

Thank you guys for the input. Items I forgot to include: Tank and sending unit are both new, all rubber lines were replaced, I also cleaned the steel line using brake clean then blowing it out before installing everything, fuel pump was replaced week. Still having the same issue with the new pump.

Good Day, I am having a fuel issue and not sure what to check next. After driving about 45-60 mins the car stalls and my filter is dry. I have the 5/16 line from tank to pump then i had 3/8 to the carb. I have switched to 5/16 all the way, replaced the pump, blew air from the tank going forward...

Try Vintiques they have a small assortment

Thank you

Looking for a set of steel wheels in the small bolt pattern 15x7 and 6's. Located in eastern washington

message sent

Interested if you still have them.

Talked to the Dr. the axels will not interchange.

I know its not the number your looking for but I have these: 9400s (only one I used), 9637sa, 9635sa

Thats looks like a great tool but it wont work on my axels theres to many holes close together.

Will do this week, Thanks

Good Day, i have a 67 dart with the small bolt pattern and brakes. I also have a newer, not sure of the year, 7 1/4 with the big brakes and bolt pattern that has been completely gone thru. It looks brand new. I would love to use my small pattern axels on the new one. Will they interchange? The...

I have a 440 marine intake and exhaust manifolds that im sure could use a good cleaning. Asking $50 or offer.

Looking for the small kickdown rod that goes to the trans lever on a 67 Dart w/slant six console shift. Not sure if there is a difference between console and column shifters. Thanks. Dean

Any chance you would have the small kickdown rod that goes to the trans lever.

I tried heat shrink hose clamps with 45* fittings.

I was cleaning out my AFB 400 and a small bearing came out of unknown. I checked the check valve and its still in there. Any ideas where this goes. The universal carter kit has one but it looks a bit bigger. No diagrams with the kit. Thanks for your help.

Finally got the other car seats in the 67 dart drivers electric pass not. Plus the old school relay. One for the seat one for the elect choke.

Shipping is available if interested

responded

Still in the box wrapped with all the tags in the original plastic and box Offenhauser 4bb intake for a slant 6, also a holley 390 4bbl which was on my motor but not happy with holleys myself. It is in good cond but probably should be gone through, has elect choke. I had to bend the throttle...

What are you asking for them or one at least.

Looking for a good cond edelbrock or carter version 500. Tired of the holley 390 need an upgrade.

thank you everyone.

Not sure where this goes but what happened to Leena that did powder coating. Its been a while since ive looked into this.

Thanks moparmat2000. Im going to have to check the motor again today I think it only has 2 speeds but I may be wrong.

Love the color what is it.

Hose issue resolved now on to wiring. The ground for the blower motor and the coiled wire in the box are together. Does each have to be grounded? I have the motor working but not sure what to do with the shorter ground. Is the coiled wire in the heater box a heater itself? Still on the 67 dart...