Search results for query: *

If you are running a stock style seat and the launch plants you back in the seat you are going to move the steering wheel.

Thank you

How many miles ?

some of the valves are going to be open or trying to open,it is not going to seat on the heads.if you back off the rocker shaft bolts on the other side it's going to look the same way.I would back the adjuster off 2 turns,tighten the shaft a little at a time working it down evenly making sure...

Better get it mocked up so you can order pushrods,they use a lot longer pushrod.

pull the valve cover and have someone crank the engine while you watch the rocker arms after unplugging coils.I chased a problem like this it would idle fairly well and as soon as you started accelerating misfire code and cel light flashing.turned out it had the lifter wheel locked up on intake...

how much for the 74?

68 fb older built racecar,has a stock cast crank 440,727.dana 60 not sure on ratio,leaf springs and ladder bars,disc on front.a lexan needs replaced and driver door is different color.comes with a 68 fb parts car with all good glass,no front clip.both cars have titles,and are in ne...

I didn't think you would get him to race that car,but i'm glad to see it.good job parker!

shelly's car didn't get crossed up it wheels up blew over at half track.i was standing at the starting line as it all happened,very scary and i can still see the fire ball from the impact more clearly than i care to.

looks like the grommet has already had silicone on it.

2004 5.7 hemi 26,000 miles,xv carbed system=carbed intake,650 road demon,msd hemi-6 and harness,msd plug wires.mp flex plate,charlies oil pan.asking 3200.00,in ne oklahoma.thanks,sam.

2004 5.7 hemi 26,000 miles,xv carbed system=carb,msd hemi6,carbed intake,msd wires.has charlies aluminum oil pan,mp flex plate.asking 3200.00,located in ne oklahoma.

ouch!

if you have a pre 67 a body there are not a lot of choices for headers for a decent price,that should also be considered.

dynamic in my 727,ptc in my power glide,both been good in high 10 sec 3000lb car.

['what about the steering center link?

driver front has pin holes,rest ok.yes the boot print is still there where someone walked up and horse kicked in front of my shop.the sad part is they could have drove it off because i had left the keys in it.

pics added

i'm selling one of my projects,it has 04 5.7 hemi,charlies oil pan and tube,xv motorsports carb conversion w 650 road demon,car is in okla.74056.asking 4500.00,sell as roller for 1000.00.okla. tittle,email for more pics,thanks,sam.

this is a project i lost interest in.[got a new challenger].it hsa a 2004 5.7 hemi,16,000 mile motor.xv motorsports carb conversion=intake ,road demon 650,msd controller and wiring harness,taylor wires,charlies oil pan and pickup,mp flex plate.727 that needs rebuilt[i was told it was good]7 1/4...

shipping to a buisness 74056,thanks

67 fb 383s on racing junk under race cars sportsman,he has a drag car listed,but also 67 car,2500.00 with parts car.

i see you got your 63 sold,i sold my 72 swinger,went dodge dealer and ordered 2010 plum crazy purple r/t challenger.probally won't get it till march.i was looking for a b5 blue one when i saw an add that had a plum crazy r/t with white r/t side stripes couldn't stand it any longer.have a merry...

it all adds up when you start with a complete car so it wasn't just the doors that was lightened,i see a lot more people removing weight than adding it.and i'll bet youv'e lost a round of racing by less than .006,i know i have.

i'll tell you why the doors were cut out,when i started building this car in my gravel drive way i was newly married with 2 step sons.so money was tight and lighter is better when you don't have a lot of horse power.it ran 13.40 first time out with a 360 in 1990 eventually 12.50s.put a 440 in it...

any pics of roll bar?thanks,sam.

just look at all the repeat adds on here for way less money.money is tight,fortunetly i can set on mine unlike many others dealing with the bad economy.

those are the same color as my first car,a 68 coupe.you'll have to come over and see my 67 coupe,if you had been at tulsa mopar race you could have drove it.its a back half ,dana 60, bb,727 w t-brake,all super pro electronics.later,sam.