Search results for query: *

So I am asking because when I do a search some people say no way and others say they work fine?! I am trying to run P235/60R15 Mickey Thompson S/T tires on all four corners on my 74 duster. 4 wheel disc brakes if that makes any difference. I am wondering if they are going to work on the...

prefer both in Black. Need the plastic A-pillar trim/covers for both sides and the plastic inside door top trim pieced that go above the door panels. Thanks!

Anyone have a set of rebuilt/goood condition lower control arms that are reinforced? For 73+ with sway bar tabs. I understand member Jim Lusk sells them but i cant contact him. (Jim, if you see this your inbox is full) Thanks

Might be a longshot but does anyone have a lightly used set of QA1 upper and lower control arms they would like to sell? For 74 duster Thanks

For small block. New or used, whats out there? Thanks

First I need to know, does the standard RPM intake fit low enough to where I can run my stock air cleaner for my 74 duster 360 and not have any interferance with the hood? Second, is it what I am looking for? I want a dual plane intake that matches my engine top end. is the performer rpm a...

I have a standard 24:1 manual steering box from my 74 duster needing a rebuild. I talked to firm feel about rebuilding it and quoted me $330. They said for an aditional $225 they can upgrade it to either a 20:1 or 16:1. Should I go for the upgrade and if so which ratio. I am doing some mid...

I have a complete dash (metal frame/bezel/gauges ect....) from a '67 Barracuda. I want to set it up in my 74 Duster. I have a few hurdles. -If I send out the rallye gauges for rebuild/re calibration will they be safe enough to use? Most concerned about water temp and oil pressure gauge...

getting ready to reassemble my rolling duster shell. When I took the car apart I wrote down detailed descriptions and took lots of pictures. Unfurtunately that was 6 years ago and during one of my moves the notes and pictures were lost. What's the general order in which the car needs to be...

Theres not alot out there available for door panels for 73 and up duster but someone on ebay was making all panels but cant find them again. Anyone know who that was or have any other options?

anyone ever converted a standard square A body 120 mph speedometer into a 150mph speedo. I'm sure it would be easy enough to have a custom layover 150mph face made.....but as far as calibrating the speedometer goes does anyone have any suggestions?

Anybody else shaved their gas cap, I love the look but now having trouble coming up with how I'm going to fill the car with fuel. I'm trying to use the stock gas tank, what has everyone else done with their filler tube? run it up just under the deck lid then pop the trunk to fill up?

Looking for ALL new rubber/gaskets for my 74 duster. Price is adding up in a hurry, does anyone sell a complete discounted kit for all weatherstripping, glass rubber, body gaskets ect.... Im just looking at individual prices right now and its adding up to be way more than i thought.

Im not into drag racing, just want a car i can actually drive. We have lots of nice curvy roads, while im not exactly going to go autocross racing, I would like to be able to have a little fun in them. Right now i have SS springs in the rear. I would like something that levels the car back...

I have a very low milage OD f body trans to go behind my 360 in my duster. Its what i have to work with, i dont have the budget to buy a new overdrive trans. Mild street car, wont be drag raced, just a street machine. I understand the countershaft wear issue on these and i can trip it...

stock duster fenders/springs ect.... I want to run 15 steel wheels, what are good rim/tire sizes that fills out the front and rear fenders pictures would be great too

I'm having a hard time finding new seat foam for the bucket seats in my '74. Somebody has to make new foam, who has a hookup?

Hows it going? Been away from the forum for awhile. Been trying to keep life on track and the duster has been unfortunately sitting half completed since I got done with school. Ready to start working on her again. What have I missed in the last 5 years, ha probably still won't be near as...

What years of control arms will interchange with/into a 66 Charger? I ask because we have a set of 68 road runner lower control arms that are available but I wasn't for sure if in 68 the body style was the only thing to change or if they changed anything in the suspension components too...

Can anyone tell me why accel lists thier "chryler superstock coil" for years 79-92, do those years run less resistance ballasts? Its seems a bit odd that they list the primary resistance at 1.400 ohms...almost as much as a points coil....seems a bit much for the earlier electronic ignitions that...

I have an old chemetron sureweld 255 AC/DC high frequency start TIG/stick welder. It is a rebadged Miller, moving core welder. The gas solenoid went bad, and I can not for the life of me track down another one. Its the old style, magnetic windings full the spring loaded plunger back. If...

need 5 wheel studs for my sixty five b-body rear end. They need to be right handed. anybody have a lead?

I'm putting a 833 OD trans in my duster from a 78 Volare, It had a Inland shifter on it that has a broken mechanism, Will the shift rods and everything work the same with a Hurst replacement mechanism?

Looking for.... A set of torsion bars, 340 bars or larger (up to 1.00 inch) Volare/Aspen overdrive trans bellhousing A-body 4 speed shifter mechanism 8.25 or 8.75 shock plates let me know, thanks

I believe that A, B and E body 8.75 shock plates are all interchangeable, can anyone confirm that this is correct?

I am looking for a late 70's small block bellhousing for the overdrive 4 speed (with the large bearing retainer). Also looking for a 73+ spool type K-member for small block A-body. thanks

Anybody else make it to bike week? I don't like to stick around main street....just too commercialized with everything too expensive, the real fun is riding around the hills. here is me and my shovelhead couple days ago

What is the difference between 70-2 bucket seats and 73+ bucket seats? My foam is garbage in my bucket seats for my 74 duster and was wondering if I could use the early style foam in my seats since it is impossible to find replacement foam for 73+ seats. I know there is some style differences...

hey all look what I just bought at an auction today! I am seriously the SECOND owner, I bought it from the original owner who passed away a month ago, won the bid at his auction today. I talked to his sister today who said she remembered when he got it, he got...

I have been learning to use Air brushes and Pinstripe brushes.....I really like air brushing but Pinstriping is what I really enjoy. I love traditional pinstriping, but I figured it wouldn't hurt to learn to do some air brushing too. I decided to make a panel to give to my grandpa.....Its a...