Search results for query: *

  • Users: Lucas
  • Order by date
  1. L

    [Found!] 273 Heads, closed chamber

    Yes they are 2658920 heads. I also have a pair of uncut bare Small valve J heads.
  2. L

    [Found!] 273 Heads, closed chamber

    My mistake they are 26589.
  3. L

    [Found!] 273 Heads, closed chamber

    I have a pair of 26588 castings that are bare sitting in my garage. If ya know anyone in Colorado you can have them for free.
  4. L

    Brake pedal travel

    If you are having excessive pedal travel related to the fronts after the rear drums are adjusted a 2 psi residual pressure valve can be fitted at each front brake line inline. If it’s a piston retracting to far back for the given master cylinder size then this will help. This will also help...
  5. L

    Aftermarket MC brake issues

    Glad I could help. I know how frustrating the lack of good instructions can be. I recently had the pleasure of installing Baer brakes all the way around on a RR and have to say that they were not only the best instructions but also actually performed awesome. The biggest part that sucks is...
  6. L

    Aftermarket MC brake issues

    I have run into lots of issues with the built in parking brake on the rear calipers. There is a very small window of operation and if not set correctly can cause a long pedal on apply. Lots of basic disc brake swaps come with those calipers for the rear and so many times have very poor...
  7. L

    Howard's cams

    I recently put together a 416 and I went with a Howard's hydraulic roller rattler cam. I know everyone has there cams they like to use. The cam I received was on a billet core so I used the crane melonized gear. They have good customer service as well. I would recommend them to anyone. Just as a...
  8. L

    ramcharger

    I would ask on ramchargercentral.com they would know for sure. I bought my 1988 4x4 for 2000.00 and it's clean with no rust.
  9. L

    Machin shop/Builder in Denver area

    I know this is an older post but have to say what an awesome job Pete and Bryce do at Ridge Reamer. They put bronze bushings in my lifter bores and all came out perfect. They also did all the other machine work on the block, crank, rods etc. They do take a few weeks to get stuff done but when...
  10. L

    Machin shop/Builder in Denver area

    I know this is an older post but have to say what an awesome job Pete and Bryce do at Ridge Reamer. They put bronze bushings in my lifter bores and all came out perfect. They also did all the other machine work on the block, crank, rods etc. They do take a few weeks to get stuff done but when...
  11. L

    Machin shop/Builder in Denver area

    I know this is an older post but have to say what an awesome job Pete and Bryce do at Ridge Reamer. They put bronze bushings in my lifter bores and all came out perfect. They also did all the other machine work on the block, crank, rods etc. They do take a few weeks to get stuff done but when...
Back
Top