Search results for query: *

Bench seat and rear cover from my ‘69 Dart. Rear cover not in picture but matches the front. One small tear on passenger side. $150. Andover, KS

I would like to sell this as a whole package deal rather than trying to part everything out. If I can’t get it sold as a package, then I will have to start piecing out everything. -17K mile 6.1 Gen III with ECM -Schumacher engine mounts for A body to 6.1 conversion -A518 transmission with US...

1969 Barracuda project car. Bought from the original family a few years ago. Started tearing it down for a Gen 3 Hemi build but didn’t get far on it and I am re-focusing efforts on other projects. Original 318/904 comes with car. Floor Pan and frames are not rotted out. They’re on much better...

Been waiting for warm weather to take my first born for a ride in my Dart. First time out with the car seat in and the 2 year old in tow! I know some people requested to see how well a car seat would fit back there since I have a cage lol. No problems when you have removable bars! Even though...

Bought this car towards the end of 2018 from the grandson of the original owner. 318/904 car. I wasn’t sure what I was going to do with it when I bought it, but long story short, ended up with a 6.1 with 17K miles I bought from a friend. I bought pretty much everything that goes on the engine...

Here’s the write up on my Dart. I don’t have much to say but wow. It’s an honor to be chosen for a feature. The pictures and story came out great. Some things aren’t correct but that’s to be expected. 1969 Dodge Dart: Evolutionary Dart - Hot Rod Network

A local dragway that had been shut down for years re-opened this past weekend. I grew up on a farm not far from there so this place is in my childhood memories. I entered into the street tire class and round after round kept knocking them out. But I had no idea what I was running at a full pass...

Looking for the left and right side trim piece that goes in the back lower corner of the door opening and attaches to the door sill plate on a ‘69 2d ht Dart. Black in color if possible. Does anyone even remake those pieces?

The Dart is back together with the exception of exhaust. Cleaned it up for an appraisal so I could get some insurance and I’m pleased with the way it turned out. 417 motor, new 200-4R transmission with FTI 4500 stall lockup converter, new Dana 60 rear with Art Morrison ladder bars and diagonal...

Selling the SB 727 out of my Dart. It was in the car when I bought it and supposedly rebuilt prior to me buying the car. Valve body is a Cheetah 17680. I had a custom 8” converter built by Dynamic Converters that is stalled at 5500 rpm. I have put about 1200 miles on the car since I’ve owned it...

Found a deal on a Dana I couldn't pass up so I'm putting a feeler out for the 8-3/4 out of my car to swap out. It was built by member MadDart here 67 Dart Build Triangulated 4 link & Mini Tub. I upgraded to Moser axles last year and added Dr. Diff rear disc brakes which only have about 200 miles...

My tires needed changed so I decided to give them a send off in the best way I could think. Burnout would have been longer but traffic showed up right in the middle of the burnout so I had to abort.

Those of you that have AMD bumpers on '67-'69 Darts, please post pics of the fitment to the trunk lid and quarter panels if you have them. Something is not right with mine. Body shop says there's a dip in the bumper but the trunk lid itself looks bowed up in the center to me. I thought the Dart...

Looking for a good set of front side marker bezels that will fit a '69 Dart or Barracuda. Got any lying around?

I really never was interested in bracket racing and I didn't build the car to bracket race. I just wanted a quick street car that I could take to the track and just run it. So last weekend at the Hot Rod Reunion at Mo-Kan Dragway I entered into the Super Modified class. Back story real quick...

I was out at Mo-Kan Dragway at the Hot Rod reunion yesterday running in the Super Modified class. Later on in the day had a couple guys come over and talked about the car, what the paint was, engine, etc. One guy had a '69 Dart himself, but they were both sort of perplexed at the fact the...

I had to share this one because I know how ya'll get giddy at the sound of a Mopar. Oh wait that's me HA! Anyhow, pulled my engine recently to fix some oil leaks and threw it on an engine stand to ensure I didn't have any leaks before I reinstalled it in the car. I had 3 camera angles going...

BBP front disk, lower control arms, spindles, and ball joints from my '69 Dart. Around 1000 miles on them. LCA's have new rubber bushings. Everything is in very good condition and there is no pitting in the control arms. They are nice. $400 for all. These are heavy. Looking for local pickup or...

Has anyone installed the Superformance rear main seal SFP9340 from Mancini? Unlike the FelPro, the "ears" appear to be detached. I was wondering how these installed properly? Do they just butt up to the outside of the seal or do you install them in between the ends of the seal? Are they...

Took a little cruise a couple weeks ago to test an oil leak solution (which didn't work). So I strapped the GoPro on my chest and took off. I didn't really want to post where I was or how fast I was actually going (never know who's watching) so I blurred the gauges (I know, lame). I'd never...

There are various 200-4R builds on here. Some with Magnum engines, some with adapter plates between the engine block and trans, and some like this build with the bellhousing cut off and using an adapter ring to utilize a Reid SFI bellhousing. But I figured I'd start my own build thread with...

I just recently swapped to Dr. Diff rear disks. They went on without a hitch.....until I started driving the car. Apparently you can't run these with a narrowed rear and also lowered. I found this out the hard way of course but avoided any catastrophe luckily. This was not something I was...

Took a left over freezer I had from a new replacement and decided I'd like to build a beer Keezer out of it (kegerator freezer). I added the collar to the top of the freezer and attached the lid to the collar. Added a piece of thin particle type board to the lid and face of the freezer and...

Selling a used Kevko M301 Oil Pan and pickup from my 340. Works perfectly. Access panel added inside to clean the front baffle chamber. Has a small dent on the back bottom of the pan. This has a oil level plug, no dipstick. $270 new. $175 shipped.

Selling the 73' and up BBP disk brake setup with spindles, lower control arms, and lower ball joints from my '69 Dart. Bushings are new in the control arms, new ball joints, little to no wear on the parts. I had only put 650 miles on it the setup. The rubber brake lines have a rubber sleeve...

FR1540 FR 16:1 ratio manual steering box with pitman. All parts have 650 miles on them and are like new. $400 + shipping FIRM.

Prayers go out to his family.. This particular track has been very loose about their tech inspections. My buddy ran out there just the weekend before, running 11's pass after pass with no helmet and no cage. I bet this will change everything there...

I have tried searching this site which doesn't have the most search friendly engine and can't find the info I need. I'm curious if the Hughes flexplate that is currently on my 340/727 can be used with a Reid bell and 200-4R. I know someone here has to have built a setup just like this. Can...

When using these online horsepower calculators, some say crank hp and some say at the wheels, yet give the same numbers. A guy at my work has dyno'd his car and ran at the track. He put his weight and mph in the calculator and he said the calculator is spot on what it puts to the wheels. So...